云母粒径对云母／聚丙烯性能的影响

研究了云母填充改性聚丙烯(云母/PP)中云母粒径对其性能的影响。实验结果表明:云母粒径越小使得云母/聚丙烯材料强度提高越大、断裂伸长率增加,加工流动性变好;同时也促进和有利于聚丙烯结晶过程中的成核作用。     

凝析油资源现状及利用

随着燕山石化、金山石化、扬子石化乙烯改造工程相继完成，石脑油的需求将不断提高，通过利用凝析油可以增加化工轻油的来源，起到稳定石脑油市场的作用。现对全球，特别是亚太地区凝析油的资源、生产、销售及未来的发展进行初步分析，并提出相应建议。     

大花水水电站引水隧洞聚丙烯纤维喷锚混凝土试验研究

大花水水电站引水隧洞洞径较大，且地质状况复杂，拟在较好地质条件的Ⅱ、Ⅲ类围岩洞段采用掺聚丙烯纤维的喷锚混凝土代替常规钢筋混凝土衬砌方案。经室内喷锚混凝土配合比及施工工艺试验研究后，提供了可供现场使用的喷锚混凝土配合比，并提出了现场施工工艺要求，为该工程引水隧洞喷锚混凝土施工创造了有利条件。     

动态交通分配中一类转换率系统的稳定性

在假设交通很拥挤同时交通的转换率与路径费用成正比的前提下，构建了一个动态的转换率模型．为了获取转换率系统的全局渐近稳定，提出了一个普遍适用的Lyapunov函数方法，与此同时通过线性矩阵不等式方法，得到了保证转换率系统全局渐近稳定的充分条件．     

脱色炭使"黄酒"恢复本色

黄色过重的白酒可以选用酒用脱色炭A、B进行脱色,A型脱色能力优于B型,B型损香较小;酒用脱色炭用量以0.2%最佳,色度深的酒必须增加炭的用量,有时可能达到2%.     

Development of temperature compensated high elongation resistance strain gauges for use up to 250°C

The paper describes the development and evaluation of temperature compensated high elongation resistance strain gauges for use from room temperature to 250°C. These gauges could be temperature-compensated on steels with coefficient of thermal expansion α = 11 ppm/°C. Thermal output within 250°C was about 1 μm/m/°C and maximum standard deviation of 5 gauges was 34 μm/m. Strain limit was > 4% at room temperature and at 250°C. Gauge factors of different strain ranges at R.T. and at 250°C are tabulated. Some applications are stated.     

企业危机的内部诱因及其预警系统的构建

企业危机对企业的生存和发展均产生了巨大冲击与破坏,已经引起国内外广大学者的关注。引起企业危机的原因既有外在原因,也有内在原因,但更应该清楚地认识到掌握其内在原因是进行企业危机管理的根本。着重分析了企业危机的内部诱因,并提出了构建企业危机预警系统的建议。     

基于BP神经网络的心电图ST段的模式识别

心电图ST段对心脏疾病的诊断具有重要意义.在正确读取采集于郑州大学一附院的运动心电图数据基础上,利用小波变换更准确地确定其ST段的起始和终止位置,初步探讨了BP神经网络用于心电图ST段识别的方法,并用此方法识别出心电图ST段的三种类型-正常、水平压低和抬高.实验结果较好.     

The summary of researches on ADS in China

The conceptual study on the accelerator driven system (ADS) that lasted for about five years ended in 1999 in China. As one project of the National Basic Research Program of China (973 Program) in the energy domain, which is sponsored by the China Ministry of Science and Technology (MOST), a five-year-program of fundamental research of ADS physics and related technology was launched in 2000 and passed national review at the end of 2005. The China Institute of Atomic Energy (CIAE), the Institute of High Energy Physics (IHEP), the Institute of Heavy Ion Physics in Peking University (PKU-IHIP) and other institutions jointly carried out the research. The research activities were focused on HPPA physics and technology, reactor physics of external source driven sub-critical assembly, nuclear data base and material study. For HPPA, a high current injector consisting of an ECR ion source, LEBT and an RFQ accelerating structure of 3.5 MeV was built. In reactor physics study, a series of neutron multiplication experimental study has been carried out and still being done. The VENUS facility has been constructed as the basic experimental platform for neutronics study in ADS blanket. It’s a zero power sub-critical neutron multiplying assembly driven by external neutron produced by a pulsed neutron generator. The theoretical, experimental and simulation study on nuclear data, material properties and nuclear fuel circulation related to ADS is carrying on to provide the database for ADS system analysis. The main results on ADS related researches will be reported.     

Amorphous Ni---N---W film as a diffusion barrier between aluminum and silicon

The influence of nitrogen on the diffusion barrier properties of amorphous Ni---W films was studied. Nitrogen was introduced into the amorphous Ni---W film by co-sputtering nickel and tungsten in a premixed gas mixture of 90% Ar and 10% N₂, resulting in the formation of amorphous Ni₃₀N₂₁W₄₉ film. X-ray analysis indicates a detectable crystallization of the amorphous film after 30 min annealing in vacuum at 600°C, accompanied by the formation of W₂N, but backscattering spectrometry (BS) reveals a reaction with silicon only at about 725°C. The Schottky barrier height of this amorphous film on n-Si is stable for 30 min annealing up to at least 550°C. With an aluminum overlayer, BS indicates that an amorphous Ni₃₀N₂₁W₄₉ film effectively prevents the metallurgical interaction between aluminum and silicon for 30 min up to 600°C. The Schottky barrier height of that contact configuration is also stable up to at least 550°C, suggesting that amorphous Ni---N---W films have attractive features as diffusion barriers.