SAPO-34/SiO_2催化甲醇制烯烃

采用水热法合成了SAPO-34分子筛,并用X射线粉末衍射仪和扫描电子显微镜对SAPO-34分子筛的结构进行了表征,同时探讨了黏合剂种类、甲醇分压、催化剂粒径和硅源等对SAPO-34分子筛催化甲醇制烯烃(MTO)反应性能的影响。实验结果表明,在MTO反应中,三烯(乙烯、丙烯和丁烯)选择性在反应初期存在明显的诱导期;以S iO2为黏合剂合成的SAPO-34/S iO2催化剂不但可缩短MTO反应的诱导期,三烯选择性也较未添加黏合剂或以A l2O3为黏合剂时高1~2个百分点;且当催化剂活性明显下降时,三烯选择性下降的幅度较小。催化剂粒径、甲醇分压及硅源对催化剂的诱导期也有明显的作用。在甲醇分压低于19kPa、催化剂粒径0.25~0.38mm、S iO2为黏合剂、硅酸四乙酯为硅源时,SAPO-34/S iO2催化剂的MTO性能明显提高。     

Numerical Simulation of Independent Advance of Ore Breaking in the Non-pillar Sublevel Caving Method

The mechanism of stress generation and propagation by detonation loading in five separate independent advance of ore breaking patterns is discussed in the paper. An elastic numerical model was developed using AN- SYS/LS-DYNA 3D Nonlinear Dynamic Finite Element Software. In this package ANSYS is the preprocessor and LS-DYNA is the postprocessor. Numerical models in the paper to actual were l：10 and the element mesh was dissected in scanning mode utilizing the symmetry characteristics of the numerical model. Five different advance rates were studied. Parameters, such as the time required to maximum stress, the action time of the available stress, the maximum velocity of the nodes, the stress penetration time, the magnitude of the stress peak and the time duration for high stress were numerically simulated. The 2.2 m advance appeared optimum from an analysis of the simulation results. The results from numerical simulation have been validated by tests with physical models.     

Modeling lossy anisotropic dielectric waveguides with the method oflines

This paper presents a new formulation useful for modeling waveguides constructed from lossy inhomogeneous anisotropic media. Our approach is based on a pair of Sturm-Liouville type wave equations that have been derived to handle inhomogeneous, diagonalized complex permittivity and permeability tensors. The method of lines is then applied to these wave equations, and related field equations, creating an indirect eigenvalue problem that correctly models this class of structure. Some refinements to the method of lines are also proposed, particularly, regarding the construction of the modal matrices found in the eigenvalue problem. Using our approach, modal dispersion curves have been computed for millimeter-wave and optical structures. Comparisons made with results available from the literature validate our approach     

IPTV及相关技术

IPTV是基于IP协议的新一代技术,介绍了IPTV的主要业务功能和系统组成,并阐述了IPTV系统的关键技术。     

Cyanex有机膦类萃取剂在贵金属溶剂萃取中的研究和应用

介绍了近年来Cyanex有机膦类萃取剂在贵金属溶剂萃取中的研究状况及应用进展，展望了该类萃取剂在贵金属分离提取中的应用前景。     

乙烯直接氧化合成乙酸

用常规固定床反应器考察了Pd-SiW12/SiO2催化剂还原条件对乙烯直接氧化合成乙酸催化性能的影响。催化剂用H2在200－300℃还原后Pd 的分散度较高，其催化活性远高于肼在液相中还原的催化剂，在乙烯气相氧化合成乙酸反应的原料气中，适量1，2－二氯乙烷的存在有助于提高乙酸的选择性和时空产率，初步考察了Pd-Se-SiW12/SiO2催化剂连续206h运转的稳定性，结果表明，催化剂中Pd晶粒的长大和硅钨酸的流失是造成催化剂失活的主要原因。     

用于数控设备的弹性环联轴器

介绍了一种适用于数控设备改造的无键联轴器，从其原理、设计、加工各方面作了阐述，并且总结了许 多实际应用经验和适用参数。     

Ray-cast volume rendering accelerated by incremental trilinear interpolation and cell templates

Two related ideas for improving the speed of ray-cast volume rendering are studied in this paper. The first is an incremental algorithm for trilinear interpolation, a method commonly used in ray-cast volume rendering to calculate sample values. The incremental algorithm can expedite trilinear interpolation when many samples along a ray are located in one cell. The second is an efficient hybrid volume rendering restricted to parallel projection. In the preprocessing stage, acell template is created to store the information used by the incremental trilinear interpolation. When a cell is parallel projected, the information is retrieved from the template to compute the cell contribution. Because the algorithm with only one template may cause aliasing, an antialiasing technique exploiting multiple cell templates is proposed. With our method, ray-cast volume rendering can be accelerated considerably.     

CTLA4 mediates antigen-specific apoptosis of human T cells

The regulation of T cell-mediated immune responses requires a balance between amplification and generation of effector function and subsequent selective termination by clonal deletion. Although apoptosis of previously activated T cells can be induced by signaling of the tumor necrosis factor receptor family, these molecules do not appear to regulate T-cell clonal deletion in an antigen-specific fashion. We demonstrate that cross-linking of the inducible T-cell surface molecule CTLA4 can mediate apoptosis of previously activated human T lymphocytes. This function appears to be antigen-restricted, since a concomitant signal T-cell receptor signal is required. Regulation of this pathway may provide a novel therapeutic strategy to delete antigen-specific activated T cells.     

钨带灯的稳定性判据试验

我们通过对国产ＢＷ—１４００型真空钨带灯的稳定性判据进行研究，发现通过钨带灯的电流达到稳定的时间很短（小于５分钟），而钨带灯的灯电阻需要经过２０分钟后才能达到稳定，因此，用电流稳定性作为钨带灯的热平衡判据是不够的，更可靠的判据还应看灯电阻是否达到平衡。