Estimation of access failure probability in D2D underlaid cellular networks

Device-to-Device (D2D) communication can reduce the mobile devices' energy consumption and increase the spectral efficiency in D2D underlaid cellular networks. However, D2D users will interfere with co-channel cellular users, which can lead to cellular communication access failures. There are two reasons for cellular communication access failures: (1)D2D interference and (2)insufficient spectrum resources. To address the absence of research on the performance of cellular services' access in D2D underlaid cellular networks, this paper defines the new services' access failure probability and handoff services' access failure probability to evaluate the effect of both D2D interference and limited resources on cellular communication access. Based on the stochastic geometry and stochastic process, a random network model is presented to estimate the access failure probabilities, which can provide guidelines for network design to ensure cellular services' access. The accuracy of the estimated access failure probability is validated through extensive simulations.     

综合物探方法在地面塌陷勘察中的应用

地面塌陷引发的地质灾害对国民经济建设的危害重大。目前,探测塌陷区的物探方法种类繁多,但没有一种方法能全面解决各种问题,需综合运用多种方法。以安徽某地面塌陷研究对象,运用高密度电法和瞬变电磁法探测重点塌陷区域,简要介绍了高密度电法、瞬变电磁法的工作原理、方法特点、数据采集和数据处理,并对数据进行了解释,通过此次探测研究,取得了明显的成果。结果表明,两种方法相互验证,相互参照,相互补充,查明了塌陷区及其附近的覆盖层厚度、地质构造和地层岩性变化,为后期地面塌陷灾害治理提供了科学依据。     

高职学生学习主动性意识的缺失与重塑

分析高职学生的特点和学习主动性意识缺失的症状,从学生的学习自觉自信、教师的课堂教学反思、学校的学生评价机制等方面,对高职学生学习主动性意识的重塑策略进行探讨,并提出相应的对策。     

我国宏观经济与证券市场关系的实证分析--基于名义 GDP 和上证指数发展速度的视角

宏观经济和证券市场的关系一直受到人们的关注,由于数据的选取和研究方法上的不同,导致宏观经济与证券市场的关系存在不同的结论或解释。从名义 GDP 和上证指数发展速度的视角,运用 HP 滤波以及 SVAR 等方法实证研究了宏观经济和证券市场的关系。研究发现：宏观经济和证券市场存在显著的因果关系;短期证券市场的波动是经济偶然性波动的预期,两者之间的滞后期效应与当期效应相互影响;方差分解表明宏观经济对于证券市场的长期贡献度很大。     

Degradability and biocompatibility of bioglass/poly(amino acid) composites with different surface bioactivity as bone repair materials

Bioglass (BG) possesses excellent bioactivity and has been widely used in the manufacture of biomaterials. In this study, a composite with different surface bioactivity was fabricated via in situ melting polymerization by incorporating BG and poly(amino acid) (PAA) at a suitable ratio. The structure of the composite was characterized by Fourier transform infrared spectroscopy and XRD. The compressive strength of the BG/PAA composites was 139 MPa (BG:PAA = 30:70). The BG/PAA composites were degradable, and higher BG in composite showed higher weight loss after 4 weeks of incubation in simulated body fluid. In addition, the BG/PAA composite maintained adequate residual compressive strength during the degradation period. The SEM results showed the differences in surface bioactivities of the composites directly, and 30BG/PAA composite showed thicker apatite layer and higher Ca/p than 15BG/PAA. in vitro MG-63 cell culture experiments showed that the composite was noncytotoxic and thus allows cells to adhere, proliferate, and differentiate. This indicates that the composite has good biocompatibility. The implantations in the bone defects of rabbits for 4 and 12 weeks were studied. The composites had good biocompatibility and were capable of guiding new bone formation without causing any inflammation. The composite may be successfully used in the development of bone implants.     

Preparation and characterization of TiO2 photoelectrode codoped with aluminum and boron and its application in dye-sensitized solar cell

Nanocrystalline titania films codoped with aluminum and boron were prepared by cathodic vacuum arc deposition. In the process, titanium alloy target was used under an O2/Ar atmosphere, and sensitization of films were carried out by natural dye-sensitized complex in anhydrous ethanol. The structure, surface morphology and UV-vis spectra of titania films codoped were measured by X-ray diffraction analysis, scanning electron microscopy and ultraviolet-visible spectrometer. Theas-deposited films are found to be amorphous. The films annealed were examinedto be of anatase structure with orientation along the (101) planes, the averagecrystal size is in the range between 41 and 45 nm. SEM results show that thereare some pores in the codoped titania films, the optical properties of the dye-sensitized films were also measured which reveals that the spectral responses of films shift to the visible region. Under simulated sunlight illumination, the overall energy conversion efficiency of dye-sensitized nanocrystalline solar cell is 0.9%.     

Einfluß des totvolumens auf die Al2O3-CVD-Abscheidung

The influence of the free gas volume around the substrate on the chemical vapor deposition of Al₂O₃ layers in the AlCl₃/H₂/CO₂ system at different pressures and temperatures has been studied. Through the water gas reaction which occurs homogeneously in the gas phase, the Al₂O₃ growth rate increases with increasing free gas volume until a certain volume is reached, after which it remains constant. For this ‘critical free gas volume’ a theoretical characteristic dimension L_max is introduced. It is defined as the normal distance from a substrate surface, at which the water molecules formed from the CO₂ + H₂ in the gas phase can no longer reach the substrate surface in the time available. The dependencies of L_max on pressure, temperature and gas flow rate deduced through this theoretical consideration show agreement with the experimental results.

Zusammenfassung

Der Einfluß des die Substrate umgebenden Totvolumens auf die Al₂O₃-CVD-Abscheidung im System AlCl₃/H₂/CO₂ wurde systematisch bei verschiedenen Drücken und Temperaturen untersucht. Durch die homogen in der Gasphase ablaufende Wassergasreaktion nimmt in allen Fällen die Abscheidungs-geschwindigkeit mit vergrößerten Totvolumen zuerst zu, bleibt aber ab einer bestimmten Totvolumensgröße konstant. Für diese “kritische Totvolumensgröße” wird die theoretische Kenngröße L_max eingeführt. Diese Größe ist als Normalabstand zur Substratoberfläche definiert, bei dem das in der Gasphase aus CO₂ + H₂ gebildeten Wasser in der zur Verfügung stehenden Zeit die mit AlCl₃ belegte Oberfläche der Substrate nicht mehr erreichen kann. Die aus dieser theoretischen Überlegung abgeleiteten Voraussagen über die Abhängigkeit des L_max von Druck, Temperatur und Gasströmungsgeschwindigkeit zeigten Übereinstimmung mit den Versuchsergebnissen.     

(Short communication) Degradation of corrosion resistance of Zircaloy-4 in LiOH aqueous solution

To investigate the degradation of corrosion resistance of Zircaloy-4 in LiOH aqueous solution, SIMS (secondary ion mass spectrometry) analysis was performed to examine the profiles of Li~ , K~ , and OH~- in oxide layers formed in the same concentration (0.1 mol/L) LiOH and KOH solutions. Even though the oxide layers have an equal thickness, the penetration depth of K~ is shallower than that of Li~ , and the penetration depth of OH~- corroded in KOH solution is also shallower than that corroded in LiOH solution. It shows that the diffusion of OH~- into oxide layer is accompanied by the corresponding cation. The difference of degradation effect of LiOH and KOH solutions on the corrosion resistance of Zircaloy-4 was discussed.     

Influence of electroplating conditions on magnetic properties of Fe-36wt.% Ni alloy film

A Fe-Ni soft magnetic film was prepared in sulphate solution by electroplating. The influences of the molar ratio of n [Fe2+ ]/ n [Ni2+ ], current density, bath temperature, pH and L-ascorbic acid concentration on magnetic properties of Fe-Ni alloy film were investigated. The results show that the saturated flux density(BS) of the film increases initially and decreases after it reaches the specific value with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density, bath temperature and pH. However, the relationship between L-ascorbic acid concentration and B S keeps linear. It is observed that the coercive force( Hc) is enhanced with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density and pH. By comparison, when the bath temperature increases, Hc always decreases. With the increase of L-ascorbic acid concentration, the coercive force increases initially and then decreases.     

Experimental Study of Microstructure Evolution during Tempering of Quenched Steel and Its Application

LARGE-SIZED FORGINGS are usually intensivelyquenched to obtain the desired microstructuredistribution,high strength and hardness.Becauseresidual stresses are high in quenched large-sizedforgings,tempering processes follow quenchingprocesses to reduce the residual stress and obtain goodmechanical properties.Several differentmicrostructures are generated in quenched steelforgings,such as martensite,bainite and retainedaustenite.Modeling of microstructure evolution inquenched steel during …