纯铜双层辉光离子渗钛组织形成机理及性能分析

采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。用配有能谱仪(EDS)的扫描电子显微镜(SEM)、X射线衍射仪和透射电子显微镜对合金层的显微组织形貌、钛含量分布、相组成及相结构类型进行了观察与测定，对合金层的形成机理进行了探讨，并对其性能进行了对比测定。结果表明：渗钛层由合金层和扩散层组成，合金层主要由TiCu (Cu)固溶体 TiCu4构成，TiCu4为Dla型有序相，TiCu为B2型有序相，扩散层为(Cu)固溶体。渗钛处理后纯铜的表面得到显著强化。     

NdCl_3·nTBP/MgCl_2-AlR_3催化体系合成丁二烯橡胶

探讨了以NdCl_3的磷酸三丁酯(TBP)溶液为主催化剂、烷基铝为助催化剂、MgCl_2为载体组成的Ziegler-Natta型催化体系引发丁二烯(Bd)聚合的某些规律。用AlEt_3作助催化剂,聚合物的顺1,4-结构含量仅为57％,反1,4-结构含量为42％;而以Al(i-Bu)_3作助催化剂,聚合物的顺1,4-结构含量为88％,反1,4-结构含量为11％。各种陈化体系中,以NdCl_3·nTBP/MgCl_2-Al(i-Bu)_3-Ip三元体系的催化活性最高,当Nd/Bd(摩尔比)为7×10~(-5)时,单体转化率达80％。低温聚合可获得高顺式、高分子量聚合物。     

矿山抗采动农村楼房的试验研究

本文通过两栋不同加固方案的二层农村楼房抗采动现场试验结果的分析,对不同加固措施的作用机理、效果及其设置条件进行了研究探讨,并提出,在农村采动区兴建抗采动变形楼房,是解放村庄下压煤、节约耕地和降低加固费用的途径。     

Radiation of millimeter waves from NRD leaky wave antennas withtapered transition and tuning aperture

The radiation of millimeter waves from the nonradiative dielectric (NRD) leaky wave antennas with the tapered transition and the tuning aperture is investigated. An accurate theory for the leakage constant and the phase constant of the antennas is presented, which is based on the generalized scattering parameters considering the higher-order mode interactions at the discontinuities. The associated transverse equivalent network involves the characterization of the mode couplings at two air-to-dielectric interfaces, the coupled mode analysis of the tapered transition, and the calculation of the radiation fields at the tuning aperture via the extended spectral domain approach. The interesting behavior of the present modified configuration of NRD leaky wave antennas is illustrated by typical examples. The validity of the theory is confirmed by the comparison of the theoretical results with experimental data for the limiting cases     

Network model approach for calculating oscillating frequency of thermoacoustic prime mover

The network model is given and used to calculate the oscillating frequency of thermoacoustic prime mover. Theoretically calculated frequency by the model is plural, whose real part denotes actual frequency of the system, and imaginary part means attenuation coefficient of acoustic pressure. Numerical calculation is made under different conditions including different acoustic cavities, spacing between each parallel plate, gas pressures and system lengths. Theoretically calculated frequency and experimentally measured frequency are in quite good agreement.     

结构化P2P网络中基于流言传播的负载均衡

提出了结构化P2P网络中利用结点间周期性的拓扑维护通信来夹带、传播消息进行负载均衡的方法，具体针对Chord系统从消息传播的速度和规模两个方面分析了该方法的性能，并利用仿真进行了验证。讨论了结论在其它形式网络中的推广和实现中的消息管理问题。     

高温稀土永磁Sm2(Co,Cu,Fe,Zr)17 的制备和性能

制备了高温稀土永磁材料Sm(Coba1Fe0．26Cu0．05Zr0．026)7．0，研究了磁性能与工艺条件的关系．结果表明：提高烧结温度可使材料的Br和(BH)max增大，但是使Hci降低；适当提高真空预烧温度，可使材料在较低烧结温度下致密化，具有较高的Hci和(BH)max和温度稳定性．真空预烧温度过高使性能的急剧降低，其主要原因是Sm的析出．在最佳工艺条件下材料的磁性能参数分别为：Br1．08T3Hci2286kA／m，Hcb932kA／m，(BH)max220．8kJ／m^3；β20-200℃为-0．19％／℃．     

128×128红外焦平面阵列时序分析与温控电路设计

介绍了微测辐射热计的 12 8× 12 8凝视型非致冷红外热像仪的系统框图 ,论述了一种新型的红外焦平面阵列温控电路设计方案以及读出电路时序的FPGA实现方法 .该方案具有高集成度、高精度、低成本、布线简单等优点 ,为热像仪系统的研制开发提供了设计思想 .     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .