纳米ZnO薄膜制备及液态源掺杂

用真空蒸发法在玻璃和单晶硅片 (10 0 )上制备Zn薄膜 ,然后对Zn薄膜进行氧化、热处理获得纳米ZnO薄膜。对在硅片上制备的Zn薄膜一次性进行高温掺杂、氧化获得纳米ZnO∶P和ZnO∶B薄膜。研究不同氧化、掺杂温度和时间对薄膜结构、电学性能的影响。结果表明 :氧化温度和时间对ZnO薄膜结构影响较大 ,液态源掺P可明显改善纳米ZnO薄膜的导电性能、结构特性和化学组分     

梅毒螺旋体血凝试剂盒的研制

以超声波处理的梅毒螺旋体为抗原,致敏经醛化、鞣化处理的绵羊红血球,应用血凝试验检测梅毒患者血清中梅毒螺旋体特异性抗体。同时以国际上公认的标准方法——FTA-ABS作为对照试验。共检测1125份血清(其中梅毒血清205份,非梅毒血清920份).两种方法检测结果完全相符,即敏感性皆为100％,血凝试验的特异性为99％。     

漫湾电厂水轮机顶盖漏水排水问题及解决方案

分析了漫湾电厂水轮机顶盖的漏水原因,提出了解决漏水的技术改造措施,同时对排水策略进行了研究,改造后经过1年的试验运行表明,取得了良好的效果,说明改造是成功的。     

Mathematical boundary integral equation analysis of an embedded shell under dynamic excitations

A boundary integral equation method is presented for the analysis of a thin cylindrical shell embedded in an elastic half-space under axisymmetric excitations. By virtue of a set of ring-load Green's functions for the shell and a group of dynamic fundamental solutions for the semi-infinite medium, the structure–medium interaction problem of wave propagation is shown to be reducible to a set of coupled boundary integral equations. Through the analysis of an auxiliary pair of Cauchy integral equations, the singularities of the contact stress distributions arc rendered explicit. With a direct incorporation of such analytical features into the formulation, an effective computational procedure is developed which involves an interpolation of regular functions only. Typical results for the dynamic contact load distributions, displacements, and complex compliance functions are included as illustrations. In addition to furnishing quantities of direct engineering interest, this treatment is apt to be useful as a foundation for further rigorous as well as approximate developments for various related physical problems and boundary integral methods.     

莫来石材料的研究现状及其应用

较详细地介绍了莫来石的性能、生产、研究现状和用途。尤其对多元复合莫来石韧性陶瓷及莫来石超细粉末的制备进行了评述,同时展望了莫来石作为高级陶瓷材料的发展前景。     

耐高温微生物驱油提高低渗透油藏采收率先导性试验

胜利油田东辛高温低渗透油藏含蜡高,常温微生物无法存活,针对这一问题,引进美国NPC公司耐高温菌种,在Y6-16井组开展高温低渗油藏微生物驱油提高采收率研究和现场试验。施工后Y6-16井日增注52m3,表皮系数由施工前的2.069减小为施工后的-6.31,油层污染得到较好改善;原油含蜡量、胶质沥青质含量降低,轻质组分增加,重质组分降低;井组采收率提高5.09个百分点。     

机组油膜振荡故障的诊断和处理

通过对广州发电厂1号机组3号轴承突发剧烈振动的现象和测试结果的分析，对振动故障进行诊断并提出解决办法，对3号轴承轴瓦进行处理后，机组恢复正常运行状态。     

液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响     

Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)