Effect of humic acid on pyrene removal from water by polycation-clay mineral composites and activated carbon

Pyrene removal by polycation-montmorillonite (MMT) composites and granulated activated carbon (GAC) in the presence of humic acid (HA) was examined. Pyrene, HA, and sorbent interactions were characterized by FTIR, fluorescence and zeta measurements, adsorption, and column filtration experiments. Pyrene binding coefficients to the macromolecules were in the order of PVPcoS (poly-4-vinylpiridine-co-styrene) > HA > PDADMAC (poly diallyl-dimethyl-ammonium-chloride), correlating to pyrene-macromolecules compatibility. Electrostatic interactions explained the high adsorption of HA to both composites (～100%), whereas HA adsorption by GAC was low. Pyrene removal by the composites, unlike GAC, was enhanced in the presence of HA; removal by PDADMAC-MMT increased from ～50 (k(d) = 2.2 × 10(3) kg/L) to ～70% (k(d) = 2.4 × 10(3) kg/L) in the presence of HA. This improvement was attributed to the adsorption of pyrene-HA complexes. PVPcoS-MMT was most efficient in removing pyrene (k(d) = 1.1 × 10(4) kg/L, >95% removal) which was explained in terms of specific π donor-π acceptor interactions. Pyrene uptake by column filters of GAC reached ～50% and decreased to ～30% in the presence of HA. Pyrene removal by the PVPcoS-MMT filter was significantly higher (100-85% removal), exhibiting only a small decrease in the presence of HA. The utilization of HA as an enhancing agent in pollutant removal is novel and of major importance in water treatment.     

Changes in size and shape of chromatin particles after successive removal of histones

The preparations of whole chromatin, chromatin selectively depleted of histone f1, depleted of all lysine-rich histones (f1, f2b, f2a2), and DNA was studied by viscosimetric and light scattering methods. The obtained results were used for calculation of the dimensions and packing ratios of DNA for the preparations studied. The packing ratio in whole chromatin is 7.2 and is almost unaffected by selective removal of histone f1 (6.9), but decreases on successive removal of the remaining four histones, the decrease being dependent more on the quantity than the kind of the dissociated histones.     

Mother-Infant Interactions in Rats Lacking CCKA Receptors.

Mediation of mother-infant interactions by the brain-gut peptide cholecystokinin (CCK) was examined by observing behavior of Otsuka Long-Evans Tokushima Fatty (OLETF) rats, which lack functional CCKA receptors because of a genetic abnormality. OLETF (n = 10) and control (Long-Evans Tokushima Otsuka [LETO] n = 10) dams interacted with 1 pup of each line on Postpartum Days 6-9. OLETF pups received more body and anogenital licking and emitted substantially more ultrasonic vocalizations than LETO pups. OLETF dams carried pups less frequently and showed a nursing position more frequently than LETO dams. No significant Pup X Dam Line interactions or line differences in dams' activity were detected. The results provide convergent validity to previous pharmacological studies implicating CCK mediation of both infant and maternal behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the equivalence of some transductions involving letter to letter morphisms on regular languages

Summary Equivalence problems of some transductions involving letter to letter morphisms on regular languages are discussed. In particular, we deal with finite substitutions and inverses of finite substitutions. Our main results are the following: (i) The equivalence problem of inverses of finite substitutions on regular languages is undecidable, (ii) The existential equivalence problem of finite substitutions on regular languages is undecidable, and (iii) The length-equivalence problem of finite substitutions on regular languages is decidable.     

Risk factors contributing to microbiological contamination of shallow groundwater in Kampala,Uganda

A study of water quality variation in shallow protected springs in Kampala was undertaken over a 12-month period to assess the causes of microbiological contamination. The microbiological quality of water was assessed using thermotolerant coliforms and faecal streptococci. Sanitary inspections and hazard assessments were undertaken to identify faecal sources (hazards), contaminant pathways and contributory factors. Data were collected on rainfall and population as additional factors potentially exerting an influence on microbiological quality. Initial analysis of the data showed a significant relationship between median level of contamination and rainfall, in particular to short-term rainfall events. Total sanitary risk score showed a significant relationship with median level of contamination, but population density may be a confounding factor. The raw microbiological data were transformed into five water quality targets: <1 and < or =10 cfu 100ml(-1) for faecal streptococci; and <1, < or =10 and < or=50 cfu 100 ml(-1) for thermotolerant coliforms. The presence of individual risk factors as well as variables for rainfall and population density were analysed with respect to failure to meet these water quality targets using contingency tables. Logistic regression models were developed for each of the five water quality targets. The analysis strongly suggested that there is rapid recharge of the springs after rainfall and this leads to microbiological contamination. On-site sanitation was less important than other sources of faecal matter, which was consistent with a low sanitation coverage in the study area. The study suggested that improving sanitary completion and local environmental hygiene was more important than controlling on-site sanitation in improving the quality of these springs.     

Array-based binary analysis for bacterial typing

An allele-specific oligonucleotide microarray was developed for rapid typing of pathogens based on analysis of genomic variations. Using a panel of Escherichia coli strains as a model system, selected loci were sequenced to uncover differences, such as single- or multiple-nucleotide polymorphisms as well as insertion/deletions (indels). While typical genomic profiling experiments employ specific sequences targeted to genomic DNA unique to a single strain or virulent gene, the present array is designed to type bacteria based on a patterned signature response across multiple loci. In the signature concept, all strains are interrogated by hybridizing their amplified DNA to an array containing multiple probe sequences. Allele-specific oligonucleotide probe sequences targeting each of these variable regions were synthesized and included in a custom fiber-optic array. For each locus, a set of specific probe sequences is selected, such that hybridization gives a binary signal/no signal response to each of the probes. Using this strategy for multiple loci, many pathogens or microorganisms could be classified using a limited number of probes. Because of the advantages of the fiber-optic array platform over other array formats, including sensitivity and speed, the platform described in this paper is capable of supporting a high-throughput diagnostic strategy.     

Dynamic repair priority for a transfer line with a finite buffer

We formulate a continuous-time Markov chain model of a transfer line in which there are two unreliable machines separated by a finite buffer. Due to limited repair resources, simultaneous repairs are not possible in cases where both machines fail, and therefore we develop a repair priority rule that depends on the number of work-pieces present in the buffer. Each machine is characterized by three exponentially distributed random variables: processing time, time to failure, and time to repair. We provide a stochastic model for finding an optimal repair priority rule and an efficient algorithm accompanied by easy-to-use Matlab software. An extensive numerical study is performed to test the sensitivity of the proposed dynamic repair priority rule. While in previous studies repair priority was given to the bottleneck machine, we show that there are situations in which priority should be given to the non-bottleneck machine. Finally, we identify conditions in which adding a second technician is economically advisable.