Effect of yttrium additions on the properties of grain-refined Mg–3%Nd alloy

A systematic study was carried out to evaluate the effect of up to 2.5% yttrium additions on the properties of Mg–3%Nd alloy designated for high-temperature gravity casting applications. All the tested alloys were grain-refined by zirconium. The results show that additions of yttrium significantly improved the tensile yield strength, fatigue strength, and creep resistance while reducing the ductility. However, other properties such as the ultimate tensile strength and corrosion resistance in 5% NaCl solution were nearly not affected. The strengthening effect obtained by the yttrium additions is explained in terms of solid-solution strengthening and due to formation of a ternary phase of Mg–Nd–Y. The improved creep resistance was due to the large solubility of yttrium in solid-solution magnesium matrix and to the effective creep deformation barriers created by the ternary phase. The casting performance of the tested alloys in terms of fluidity was similar and no significant effect of the yttrium was evident     

UV disinfection of RBC-treated light greywater effluent: kinetics, survival and regrowth of selected microorganisms

The microbial quality of raw greywater was found to be much better than that of municipal wastewater, with 1.6 x 10(7)cfu ml(-1) heterotrophic plate count (HPC), and 3.8 x 10(4), 9.9 x 10(3), 3.3 x 10(3) and 4.6 x 10(0)cfu 100 ml(-1) faecal coliforms (FC), Staphylococcus aureus sp., Pseudomonas aeruginosa sp. and Clostridium perfringes sp., respectively. Further, three viral indicators monitored (somatic phage, host: Escherichia coli CN(13) and F-RNA phages, hosts: E. coli F+(amp), E. coli K12) were not present in raw greywater. The greywater was treated by an RBC followed by sedimentation. The treatment removed two orders of magnitude of all bacteria. UV disinfection kinetics, survival and regrowth of HPC, FC, P. aeruginosa sp. and S. aureus sp. were examined. At doses up to 69 mW s cm(-2) FC were found to be the most resistant bacteria, followed by HPC, P. aeruginosa sp. and S. aureus sp. (inactivation rate coefficients: 0.0687, 0.113, 0.129 and 0.201 cm2 mW(-1)s(-1), respectively). At higher doses (69-439 mW s cm(-2)) all but HPC (which exhibited a tailing curve) were completely eliminated. Microscopic examination showed that FC self-aggregate in the greywater effluent. This provides FC an advantage at low doses, since the concentration of suspended matter (that can provide shelter from UV radiation) in the effluent was very low. FC, P. aeruginosa sp. and S. aureus sp. did not exhibit regrowth up to 6h after exposure to increasing UV doses (19-439 mW s cm(-2)). HPC regrowth was proven to be statistically significant in un-disinfected effluent and after irradiation with high UV doses (147 and 439 mW s cm(-2)). At these doses regrowth resulted from growth of UV-resistant bacteria due to decreased competition with other bacteria eliminated by the irradiation.     

Wide-angle chromatic aberration corrector for the human eye

The human eye is affected by large chromatic aberration. This may limit vision and makes it difficult to see fine retinal details in ophthalmoscopy. We designed and built a two-triplet system for correcting the average longitudinal chromatic aberration of the eye while keeping a reasonably wide field of view. Measurements in real eyes were conducted to examine the level and optical quality of the correction. We also performed some tests to evaluate the effect of the corrector on visual performance.     

Reducing the formation of glucose degradation products in peritoneal dialysis solutions by ultrahigh temperature ohmic heating

Peritoneal dialysis (PD) is commonly performed by using preprepared dialysis solutions containing glucose, which are thermally treated to achieve commercial sterilization. A series of glucose degradation products (GDPs) are being formed, which react with the tissue during the dialysis procedure, thus baring a negative effect on the patient and the dialysis process. The present study tested the efficacy of ohmic heating as an alternative thermal treatment for continuous sterilization of PD solutions. The process was compared to conventional retort treatment, and GDPs accumulation was measured. Thermal treatments using the ohmic heating system were performed at three temperatures (105, 125, and 150 degrees C) with residence time at each temperature ranging from 0.84 to 12.0 s. The resulting concentrations of glyoxal (GO), methylglyoxal (MGO), and 3-deoxyglucosone (3-DG) in the PD solutions were measured. None of these GDPs were found in PD fluids treated by ohmic heating at 105 degrees C. The concentration of 3-DG, after a standard sterilization treatment (121 degrees C, 20 or 40 min) was one order of magnitude higher (approximately 140 and 242 microM) than after ohmic heating treatment at 125 degrees C. The results of the present study suggest that this technique can be used to produce solutions with much lower content of GDPs. It also demonstrates the advantage of using the ohmic heating technology as a tool for high temperature short time treatment of PD fluids.     

Dietary intake and stress fractures among elite male combat recruits

Background

We examined the effect of four weeks of ??-alanine supplementation on isometric endurance of the knee extensors at 45% maximal voluntary isometric contraction (MVIC).

Methods

Thirteen males (age 23?±?6 y; height 1.80?±?0.05?m; body mass 81.0?±?10.5?kg), matched for pre-supplementation isometric endurance, were allocated to either a placebo (n?=?6) or ??-alanine (n?=?7; 6.4?g·d^-1 over 4?weeks) supplementation group. Participants completed an isometric knee extension test (IKET) to fatigue, at an intensity of 45% MVIC, before and after supplementation. In addition, two habituation tests were completed in the week prior to the pre-supplementation test and a further practice test was completed in the week prior to the post-supplementation test. MVIC force, IKET hold-time, and impulse generated were recorded.

Results

IKET hold-time increased by 9.7?±?9.4?s (13.2%) and impulse by 3.7?±?1.3 kN·s^-1 (13.9%) following ??-alanine supplementation. These changes were significantly greater than those in the placebo group (IKET: t ₍₁₁₎?=?2.9, p ??0.05; impulse: t ₍₁₁₎?=?3.1, p????0.05). There were no significant changes in MVIC force in either group.

Conclusion

Four weeks of ??-alanine supplementation at 6.4?g·d^-1 improved endurance capacity of the knee extensors at 45% MVIC, which most likely results from improved pH regulation within the muscle cell as a result of elevated muscle carnosine levels.     

Cold-set whey protein microgels for the stable immobilization of lipids

Novel sub-millimeter cold-set whey protein isolate (WPI) microgels for the stable immobilization of lipids were prepared by an emulsification/internal gelation technique. Microgels were prepared by the addition of a denatured WPI/lipid primary emulsion (containing a micronized calcium source) into an oil bath with gentle stirring, into which an oil soluble acid was added to liberate calcium and initiate gelling of the whey-based matrices. The efficiency of these matrices to entrap lipids was assessed by comparing to extrusion/externally gelled matrices, where the production process is potentially less destructive, but microgels under 1 mm in diameter are difficult to achieve. The micron-sized (below 100 μm in diameter) internally gelled matrices produced by an optimized process, successfully immobilized incorporated lipids, with greater than 93% retention of lipids, regardless of the investigated manufacturing conditions. Migration of exterior oil, during the O/W/O production process, into the microgels was also avoided. Examination of the micro-structure by scanning electron microscopy revealed voids uniformly distributed throughout the matrix, representative in size (under 0.4 μm) of the original primary emulsion lipid droplets. The study shows relevant feasibility for the stable inclusion of a wide range of sensitive lipophilic bioactive ingredients into these matrices, where the sub-millimeter size of the microgels represents potential for incorporation into a variety of food systems.     

Miscibility of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) with high molecular weight poly(lactic acid) blends determined by thermal analysis

An important strategy used in the polymer industry in recent years is blending two bio‐based polymers to attain desirable properties similar to traditional thermoplastics, thus increasing the application potential for bio‐based and bio‐degradable polymers. Miscibility of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) with poly(L ‐lactic acid) (PLA) were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Three different grades of commercially available PLAs and one type of PHBV were blended in different ratios of 50/50, 60/40, 70/30, and 80/20 (PHBV/PLA) using a micro‐compounder at 175°C. The DSC and TGA analysis showed the blends were immiscible due to different stereo configuration of PLA polymer and two distinct melting temperatures. However, some compatibility between PHBV and PLA polymers was observed due to decreases in PLA's glass transition temperatures. Additionally, the blends do not show clear separation by SEM analysis, as observed in the thermal analysis. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Mother-Infant Interactions in Rats Lacking CCKA Receptors.

Mediation of mother-infant interactions by the brain-gut peptide cholecystokinin (CCK) was examined by observing behavior of Otsuka Long-Evans Tokushima Fatty (OLETF) rats, which lack functional CCKA receptors because of a genetic abnormality. OLETF (n = 10) and control (Long-Evans Tokushima Otsuka [LETO] n = 10) dams interacted with 1 pup of each line on Postpartum Days 6-9. OLETF pups received more body and anogenital licking and emitted substantially more ultrasonic vocalizations than LETO pups. OLETF dams carried pups less frequently and showed a nursing position more frequently than LETO dams. No significant Pup X Dam Line interactions or line differences in dams' activity were detected. The results provide convergent validity to previous pharmacological studies implicating CCK mediation of both infant and maternal behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the equivalence of some transductions involving letter to letter morphisms on regular languages

Summary Equivalence problems of some transductions involving letter to letter morphisms on regular languages are discussed. In particular, we deal with finite substitutions and inverses of finite substitutions. Our main results are the following: (i) The equivalence problem of inverses of finite substitutions on regular languages is undecidable, (ii) The existential equivalence problem of finite substitutions on regular languages is undecidable, and (iii) The length-equivalence problem of finite substitutions on regular languages is decidable.