Human serum albumin adsorption on poly[(glycidyl methacrylate)‐co‐(methyl methacrylate)] beads modified with a spacer‐arm‐attached L‐histidine ligand

Poly(GMA/MMA) beads were synthesized from glycidyl methacrylate (GMA) and methyl methacrylate (MMA) in the presence of a cross‐linker (i.e. ethyleneglycol dimethacrylate) (EGDMA) via suspension polymerization. The epoxy groups of the poly(GMA/MMA) beads were converted into amino groups with either ammonia or 1,6‐diaminohexane (i.e. spacer‐arm). An L ‐histidine ligand was then covalently immobilized on the aminated (poly(GMA/MMA)‐AH) and/or the spacer‐arm attached (poly(GMA/MMA)‐SAH) beads using glutaric dialdehyde as a coupling agent. Both affinity adsorbents were used in human serum albumin (HSA) adsorption/desorption studies under defined pH, ionic strength or temperature conditions in a batch reactor. The spacer‐arm attached affinity adsorbent resulted in an increase in the adsorption capacity to HSA when compared to the aminated counterpart (i.e. poly(GMA/MMA)‐AH). The maximum adsorption capacities of the affinity adsorbents were found to be significantly high, i.e. 43.7 and 80.2 mg g^?1 (of the beads), while the affinity constants, evaluated by the Langmuir model, were 3.96 × 10^?7 and 9.53 × 10^?7 mol L^?1 for poly(GMA/MMA)‐AH and poly(GMA/MMA)‐SAH, respectively. The adsorption capacities of the affinity adsorbents were decreased for HSA by increasing the ionic strength, adjusted with NaCl. The adsorption kinetics of HSA were analysed by using pseudo‐first and pseudo‐second‐order equations. The second‐order equation fitted well with the experimental data. Copyright © 2005 Society of Chemical Industry     

Preparation and characterization of comb type polymer coated poly(HEMA/EGDMA) microspheres containing surface-anchored sulfonic acid: Application in γ-globulin separation

Poly(2-hydroxyethyl methacrylate/ethylenglycol dimethacrylate), poly(HEMA/EGDMA) microspheres was prepared via suspension polymerization. After activation of the hydroxyl groups of poly(HEMA/EGDMA) by bromination, surface-initiated atom transfer radical polymerization (ATRP) of glycidylmethacrylate was conducted in dioxane/bipyridine mixture with CuBr as catalyst at 65 °C. The epoxy groups of the poly(glycidylmethacrylate) comb polymer were converted into sulfonic acid groups (as proton-exchange groups) with reaction of sodium sulfite. Synthesized microspheres were characterized by swelling studies, FT-IR spectroscopy, scanning electron microscopy (SEM) and elemental analysis. The microspheres were used as ion-exchange support for adsorption and purification of human γ-globulin (IgG). The maximum γ-globulin adsorption on the ion-exchange adsorbents was observed at between pH 5.0 and 6.0. The IgG adsorption onto the poly(HEMA/EGDMA) microspheres was negligible. The maximum amount of adsorbed γ-globulin was found to be 230.1 mg/g microspheres. The ion-exchange adsorbents allowed one-step separation of IgG from human plasma. The γ-globulin molecules could be repeatedly adsorbed and desorbed with this ion-exchange support without noticeable loss in their IgG adsorption capacity.     

Studies on accumulation of uranium by fungus Lentinus sajor-caju

The untreated, heat- and alkali-treated Lentinus sajor-caju mycelia were used for the recovery of uranium from aqueous solutions. The effect of pH, temperature, initial concentration of UO(2)(2+) ions and contact time parameters were investigated in a batch system. The particles sizes of the fungal mycelia were ranging from 100 to 200 microm. Biosorption equilibriums were established in about 30 min and the correlation regression coefficients show that the adsorption process can be well defined by the Freundlich equation. The alkali treated form had a high biosorption capacity (378 mg/g) than those of the untreated (268 mg/g) and heat-treated fungal mycelia (342 mg/g). Optimum biosorption was observed at pH 4.5 for all the tested fungal preparations and was independent of temperature (5-35 degrees C). In addition, the polarity and surface energy of the fungal biomass film preparations were determined by contact angle measurement. The fungal biomass could be regenerated using 10mM sodium carbonate, with up to 93% recovery. The biosorbents were used in six biosorption-desorption cycles and no considerable loss in the biosorption capacity was observed.     

Aflatoxin M1 levels of Turkish white brined cheese

This study was undertaken to determine the presence and levels of aflatoxin M₁ (AFM₁) in Turkish white brined cheese consumed in the province of Erzurum, Turkey. For this purpose, a total of 193 cheese samples were randomly obtained from retail outlets and Enzyme Linked Immunosorbent Assay (ELISA) technique was used to determine the presence and levels of AFM₁. AFM₁ at detectable level (50 ng/kg) was found in 82.4% of the samples. The concentration of AFM₁ in samples ranged from 52 to 860 ng/kg. Of the samples, 26.4% exceed the legal limit of 250 ng/kg established by Turkish Food Codex. It was concluded that widespread occurrence of AFM₁ in Turkish white brined cheese samples were considered to be possible hazards for public health especially children.     

Preparation and characterization of strong cation exchange terpolymer resin as effective adsorbent for removal of disperse dyes

In this study, (hydroxypropylmethacrylate-co-ethyleneglycol dimethacrylate-co-glycidylmetharylate) terpolymer resin functionalized with sulfonic acid groups was prepared and used as cation exchange resin for removal of two different disperse dyes (i.e., Direct Red R [DR-R] and Disperse Violet 28 [DV-28]) from aqueous solution. The properties of the adsorbent were determined using Fourier transform infrared, dynamic light scattering, scanning electron microscopy, and Brunauer, Emmett, and Teller methods. The maximum adsorption capacity of the resin for the DR-R and DV-28 was found to be 86.1 and 179.6 mg/g, respectively. Desorption study was realized to evaluate the reusability of the resin and the percent desorption from the resin for DR-R and DV-28 dyes was found to be approximately 89.4% and 91.7%, respectively. The experimental data were evaluated using different kinetics and isotherm models. These results show that the experimental data could be designated with the second-order kinetic model and both Langmuir and Temkin isotherm models. Finally, the presented resin was able to remove large amounts of organic pollutants in a short process time with a low amount of adsorbent. Thus, it was shown that the prepared resin has high potential for use as an effective and sustainable adsorbent for the treatment of industrial wastewater. POLYM. ENG. SCI., 60:192–201, 2020. © 2019 Society of Plastics Engineers     

LU triangularization extreme learning machine in EEG cognitive task classification

Neural Computing and Applications - Electroencephalography (EEG) has been used as a promising tool for investigation of brain activity during cognitive processes. The aim of this study is to reveal...