Gas sensing of colloidal polyaniline in a chemoresistor consisting of nanometer electrodes

The high conductivity of colloid-conducting polymers is explained by the networking structures and the hopping mechanisms of the metallic particles [1], [2] and [4]. To observe how the metallic region and the networking structures differ in sensing NH₃ gas, E-beam lithography and electromigration were used to make chemoresistors with nanometer-gap electrodes. Colloid Pani was coated on a nanometer gap as a reaction matrix for the gas. The I-V curves were measured in a vacuum and the NH₃ gas was nonlinear. In sensors with a gap of less than 10 nm, there was a two- or threefold increase in the conductivity, and the work function decreased from 600 meV in a vacuum to 250 meV in NH₃ gas. In contrast, the conductivity of sensors with gaps of 200 and 500 nm decreased to 1/1000 in the NH₃ gas environment. The decrease of the conductivity can be explained by electron-hole annihilation, which appears to occur on the surface of the secondary particles. With comb-type electrodes, the operating voltage can be decreased by three orders of magnitude. In electrodes with 200 and 500 nm gaps, the I-V has a step-type response to NH₃ gas.     

What do we want specifically from the cell phone? An age related study

This study investigated the evolution of specific cell phone feature preferences among high school, undergraduate and graduate college students in Finland. Following the relevant literature review, the paper analyzed the responses of 118 high school, 268 undergraduate and 84 graduate students from educational institutions located in the metropolitan area of Tampere, Finland. The results indicate that the students in Finland appreciate the specific feature “clock”, “phone”, “high battery life”, “alarm”, and “calendar” as very important, and the specific features “TV connectivity”, “joystick”, “live TV”, “Twitter”, and “small screen size” as unimportant features. There were also significant differences in the specific feature preferences between the students between high school, undergraduate and graduate students. In addition there were differences in the way the respondents conceptualize the specific feature preferences of the cell phone. The paper concludes with a discussion regarding the academic and managerial implications.     

Synthetic aperture radar image compression using tree-structured edge-directed orthogonal wavelet packet transform

Currently, wavelet-based coding algorithms are popular for synthetic aperture radar (SAR) image compression, which is very important for reducing the cost of data storage and transmission in relatively slow channels. However, standard wavelet transform is limited by spatial isotropy of its basis functions that is not completely adapted to represent image entities like edges or textures, which means wavelet-based coding algorithms are suboptimal to image compression. In this paper, a novel tree-structured edge-directed orthogonal wavelet packet transform is proposed for SAR image compression. Inspired by the intrinsic geometric structure of images, the new transform improves the performance of standard wavelet by filtering along the regular direction first and then along the orthogonal direction with directional lifting structure. The cost function of best basis selection is designed by textural and directional information for tree-structured edge-directed orthogonal wavelet packet transform. The new transform including speckle reduction can be used to construct SAR image coder with the embedded block coding with optimal truncation for transform coefficients, and arithmetic coding for additional information. The experimental results show that the proposed approach outperforms JPEG2000 and Fast wavelet packet (FWP), both visually and item of PSNR values.     

QoS for wireless sensor networks: Enabling service differentiation at the MAC sub-layer using CoSenS

Providing service differentiation in wireless sensor networks while proposing simple and highly scalable solution is a challenging problem. We retain the use of CSMA/CA as access protocol because of its simplicity, versatility and good scalability properties. We developed CoSenS, a Collect then Send burst Scheme, on top of it to address its weaknesses while facilitating the implementation of scheduling policies. In this article, we propose a simple and scalable service differentiation solution; we implement fixed priority and earliest deadline first on top of CoSenS. The simulation analysis shows that our solution self-adapts to the traffic variation and greatly enhances end-to-end delay, reliability and deadline meet ratio for urgent traffic while not degrading best effort traffic compared to IEEE 802.15.4 original protocol and IEEE 802.15.4 implementing these scheduling policies. Additionally, CoSenS is implemented and tested on motes. The real experimentation results validated our simulation analysis.     

Bus-driven floorplanning with thermal consideration

As the increasing number of buses in multi-core SoC designs, bus planning problems become a dominant factor in determining the chip performance. To cope with these issues, it is desirable to consider them in the early floorplanning stage. Recently, many bus-driven floorplanners have been proposed in the literature. However, these proposed algorithms only consider the bus planning problem without the thermal effect. As a result, there are hotspots, which result in high chip temperature, on the chip. In this paper, a thermal-driven bus-driven floorplanning algorithm is proposed to separate hotspots during the perturbation stage and to keep buses away from hotspots during the routing stage. To avoid time-consuming thermal simulations, the superposition of thermal profiles, which are the thermal distribution of each module, is adopted to efficiently estimate the module temperature. Compared with the state-of-the-art bus-driven floorplanner, experimental results demonstrate that the proposed algorithm can effectively separate hotspots and reduce the chip temperature.     

Defocusing image to pattern contact holes using attenuated phase shift masks

The patterning of contact holes by selecting out-of-focus image plane (defocus) using attenuated phase shift masks (APSM) has been studied. Defocus is found to enhance the image modulation at low partial coherence for contact holes with negative local average of mask function. Semi-dense holes up to 130 nm in 8% APSM have been printed by 0.5 μm defocus at a partial coherence of 0.31 using KrF scanner with highest numerical aperture of 0.68. However, these holes were closed with in-focus imaging. Defocus is also found to be beneficial for patterning the pitches that have extensive side lobes with in-focus imaging.     

A low-overhead and reliable switch architecture for Network-on-Chips

This paper proposes and evaluates Low-overhead, Reliable Switch (LRS) architecture to enhance the reliability of Network-on-Chips (NoCs). The proposed switch architecture exploits information and hardware redundancies to eliminate retransmission of faulty flits. The LRS architecture creates a redundant copy of each newly received flit and stores the redundant flit in a duplicated flit buffer that is associated with the incoming channel of the flit. Flit buffers in the LRS are equipped with information redundancy to detect probable bit flip errors. When an error is detected in a flit buffer, its duplicated buffer is used to recover the correct value of the flit. In this way, the propagation of the erroneous flits in NoC is prevented without any need to credit signals and, retransmission buffers. Using an HDL-based NoC simulator, the LRS is compared to two other widely used reliability enhancement methods: the Switch-to-Switch (S2S) and the End-to-End (E2E) methods. The simulation results show that the LRS consumes less power and provides higher performance compared to those of the E2E and S2S methods. More importantly, unlike the E2E and the S2S methods, the LRS has constant overheads, which makes it applicable in all working conditions. To validate the comparison, an analytical performance and reliability model is developed for the LRS, S2S and E2E methods. The results of the model match those obtained from the simulations while the proposed model is significantly faster.     

Multi-layer floorplanning for stacked ICs: Configuration number and fixed-outline constraints

3-D (stacked device layers) ICs can significantly alleviate the interconnect problem coming with the decreasing feature size and is promising for heterogeneous integration. In this paper, we concentrate on the configuration number and fixed-outline constraints in the floorplanning for 3-D ICs. Extended sequence pair, named partitioned sequence pair (in short, P-SP), is used to represent 3-D IC floorplans. We prove that the number of configuration of 3-D IC floorplans represented by P-SP is less than that of planar floorplans represented by sequence pair (SP) and decreases as the device layer number increases. Moreover, we applied the technique of block position enumeration, which have been successfully used in planar fixed-outline floorplanning, to fixed-outline multi-layer floorplanning. The experimental results demonstrate the efficiency and effectiveness of the proposed method.     

Approach to designing bribery-free and coercion-free electronic voting scheme

Electronic voting has been in development for more than 20 years, during which it has produced outstanding results both in theory and in practice. However, bribery and coercion remain an open problem, as there is still no suitable manner to prevent or fight them. Publications emphasizing practicality has not been able to achieve effective protection, probably due to their overtly simple protection method, while publications emphasizing theories are difficult to put into practice due to the complicated protection method devised by them. Thus, how to design a scheme that can flawlessly prevent problems of bribery and coercion as well as put into practice easily becomes a significant issue. In this paper, we suggest that designers apply two indispensable design components, invisible channel and biometrics receipts, to design a prevention e-voting scheme, and also to introduce several feasible technology to help with its implementation. Followingly, a prevention electronic voting scheme that matches our ideal is proposed. We expect this study to arouse the interest of more researchers regarding the subject.