Preparation and characterization of antibacterial silver-dispersed activated carbon aerogels

Silver-dispersed carbon aerogels (CAs) were obtained by direct immersion of organic aerogels prepared by ambient pressure drying technique in AgNO₃ aqueous solution and then carbonization. The effect of preparation conditions such as the resorcinol/catalyst ratio, the feed AgNO₃ concentration, the ratio of aerogel mass/solution volume, immersion time and carbonization temperature on the bulk density and silver content as well as the BET surface area of the dispersed CAs was studied. The dispersion and structure of silver nanoparticles in obtained materials were investigated by means of scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The Ag-dispersed CAs prepared exhibit strong and long-term antibacterial activity.     

掺铜TiO^2光催化剂光催化氧化还原性能的研究

利用浸渍法制备了掺铜二氧化钛光催化剂，分别以乙酸降解和二氧化碳还原反应为探针，研究了催化剂的光催化氧化光催化还原性能．结果表明，铜掺杂能显著提高催化剂的光催化性能；结合光电子能谱、X光衍射分析等物理表征结果，对铜掺杂改性机制进行了讨论．     

空气气氛中烧成Si3N4-SiC复合材料的性能、相组成和显微结构

以氮化硅细粉(粒度＜0.088 mm,w(β-Si3N4)＞95%)、碳化硅(w(SiC)＞98%,粒度分别为2.8～0.9mm、0.9～0.15 mm、＜0.115 mm和＜0.063 mm四级)、硅粉(粒度＜0.045 mm,w(Si)＞98%)和硅灰(w(SiO2)=98.3%)为原料,以木质素磺酸钙水溶液作成型结合剂,采用150 MPa的压力成型为65 mm×114 mm×230mm的Si3N4-SiC、Si3N4-SiC-Si和Si3N4-SiC-SiO2三种试样.在空气气氛中,以50℃·h-1的升温速度升至800℃保温4 h,再升至1450℃保温2 h,自然冷却至室温后,测定烧成后试样的常温耐压强度、常温抗折强度、1400℃下的高温抗折强度、显气孔率、体积密度和残氮率,并采用XRD、SEM和EPMA等手段分析烧后试样的相组成和显微结构.结果表明3种试样在空气气氛中烧成后的高温(1400℃)和常温抗折强度都比较高,显气孔率都比较低,而耐压强度则以Si3N4-SiC试样的最高;烧成后试样中心区域的残氮率以Si3N4-SiC-Si试样的最高,Si3N4-SiC-SiO2试样的次之,Si3N4-SiC试样的最小;在空气气氛中烧成后,Si3N4-SiC试样中的Si3N4分解较多,SiC-Si3 N4-Si试样的表面和内部都明显含有单质Si,SiC-Si3N4-SiO2试样表面区域的Si2N2O晶体发育很好,而内部区域的晶体发育较小.     

云母增强聚丙烯的研究

系统地研究了偶联剂，接枝聚丙烯性能的影响。     

Mobil Zeolite Catalysts for Monomers

It has been about 20 years since Plank, Rosinski, and Hawthorne reported their spectacular results with metal-modified zeolite cracking catalysts for more efficient production of gasoline [1]. This discovery has saved an estimated 200 million barrels of crude oil each year in the United States alone [2]. In 1972, a patent by Argauer and Landolt described the preparation of a member of a generation of new synthetic zeolites, called ZSM- 5. It was unique because of its high silica/alumina ratio and greatly reduced coking rates for reactions with hydrocarbons by comparison with known low silica zeolites [3]. This material was an early member of a series of over 50 synthetic zeolitic substances prepared in Mobil laboratories.     

神木煤的主要性质对其水煤浆特性的影响

研究我国大型优质神木煤田12个煤样的主要性质,对其水煤浆特性的影响。实验表明,煤中水分和含氧官能团是主要因素,水分中以最高内在水分与水煤浆浓度呈线性相关,提出以最高内在水分作为评价指标。并研究了煤浆的改性方法,一是加热方法使水分和官能团脱除,煤表面亲水性降低,使煤浆浓度大幅度提高,二是除去煤中可溶无机离子,可使煤浆粘度降低,并添加某些电解质有可能提高稳定性。     

Study on the graphite nanosheets/resin shielding coatings

Shielding coatings based on graphite nanosheets were prepared by compounding method. The surface morphology of the graphite nanosheets and conductive coatings was examined by scanning electron microscopy. The surface resistivity of the coatings was greatly declined by incorporating the graphite nanosheets. The electromagnetic interference shielding effectiveness (SE) from 0.3 MHz to 1.5 GHz was also studied, and found that the SE of the coatings was consistent with its conductivity. The best sample was shown to exhibit up to 38 dB of SE at 1.5 GHz (with a thickness of 400 μm). The main shielding mechanism of the system was reflection and multiple reflections.     

Swelling behavior of poly(sodium acrylate)/kaoline superabsorbent composite

Using partly neutralized acrylic acid as monomer, kaoline ultrafine powder as filler and N,N′‐(dimethyl)acrylamide as crosslink agent, poly(sodium acrylate)/kaoline superabsorbent composite was synthesized by aqueous solution polymerization method. Using the superabsorbent composite as collagen, a hydrogel was prepared. The influence of the neutralization degree of superabsorbent collagen, the compositions, the concentration, and the pH value of exterior solution on the swelling behavior of the hydrogel was investigated. It was found that the swelling capability of the hydrogel depended on the groups on the collagen. The swelling capability of the hydrogel relied on the ionic intensity, molecular polarity, molecular volume, as well as the concentration of exterior solution. When the pH value of exterior solution was equal to seven, the hydrogel has a maximum swelling value of 800 times. POLYM. ENG. SCI. 46:324–328, 2006. © 2006 Society of Plastics Engineers     

α─甲基苯乙烯和丙烯腈乳液共聚研究

本文用α─甲基苯乙烯（α—ＭＳ）和丙烯腈（ＡＮ）为主要原料，用乳液聚合技术合成了α—ＭＳ—ＡＮ共聚物．主要研究了乳化剂种类和用量、引发剂用量、单体的不同加料方式和配比对聚合的影响．同时考察了单体的不同配比对共聚物性能的影响．并通过ＩＲ等手段对共聚物进行了表征，最终得到了令人满意的α—ＭＳ—ＡＮ共聚物。