稀薄效应下空气静压主轴动态特性分析及试验研究

针对微尺度下空气静压主轴的动态特性问题,建立了体现稀薄效应的主轴有限元模型,对主轴的模态、谐响应进行了研究。首先,基于有限元法对主轴进行建模,轴承部分采用Combin14弹簧单元建模。接着,通过扰动法得出稀薄效应下以及传统情况下轴承的刚度、阻尼参数,将此参数替代主轴模态分析中采用的弹簧单元的刚度、阻尼参数,结合主轴实际工作状态,进而分析出两种情况下的主轴的模态结果。然后,对主轴进行谐响应分析,校核之前模态分析结果。最后,对主轴进行锤击模态试验,从而检验两种状态下的模态分析结果。实验结果表明：稀薄效应下分析所得主轴1阶固有频率值较试验测量值的误差只有3.6%左右,而传统情况下得出的1阶频率值的误差在15%左右,这对主轴系统以后的优化设计和精度控制方面具有一定的理论依据。     

基于SWMM的铁心桥实验基地内涝防治效果模拟

基于南京水科院铁心桥实验基地的地形、下垫面条件等数据构建了SWMM,模拟了实验基地象目湖观景平台和水上餐厅两个监测点在不同降雨重现期、低影响开发措施、溢流孔设置和水泵强排条件下受淹情况。结果表明,初始水位较低(25.1 m)时,象目湖遭遇500年一遇的降雨事件时水位并未抬升至水上餐厅。初始水位较高(25.6 m)时,200年一遇和500年一遇的降雨事件中水上餐厅受淹持续时间分别为7 h和11 h。采用集水池、雨水花园和生物滞留池3种LID措施对象目湖水位峰值影响模拟结果显示,在5年或10年一遇的降雨事件中雨水花园和集水池可以分别降低象目湖峰值水位0.06 m和0.02 m,生物滞留池没有削减峰值水位。在降雨量为218.5 mm的20160707次降雨事件中LID措施削减象目湖水位效果不明显。水泵抽排流量越大,象目湖水位越早回落到观景平台以下。LID在应对造成城市内涝的低频次、短历时强降雨方面作用有限,铁心桥实验基地象目湖内涝防治应以加强水文气象预测和水位管理、加大溢流孔尺寸和采用水泵强排等措施为主。     

Convolutional neural networks recognition algorithm based on PCA

To improve the insufficiency of Synthetic Aperture Radar(SAR) labeled training data for Convolutional Neural Networks(CNN) and the recognition rate for large variations, a novel CNN recognition algorithm is proposed. Firstly, a set of features is extracted from the original data by unsupervised training based on PCA as the initial filter set for CNN. Secondly, in order to accelerate the training speed while avoiding over-fitting, the Rectified Linear Units(ReLU) is adopted as the non-linear function. Thirdly, to strengthen robustness and mitigate the defects of pooling upon features, a probabilistic max-pooling sampling method is introduced and local contrast normalization is exploited on features after the convolutional layer. Experiments demonstrate that our algorithm outperforms the original CNN in recognition rate and achieves better robustness for large variations and complex background.     

基于App inventor的试题库开发

运用App Inventor开发工具,设计了一款TD-LTE系统试题库的安卓手机应用软件,成功实现了考前练习、考前模拟的高效学习效果,本试题库内包括单项选择题、判断题、多项选择题,并且可以达到几千道题的题库容量,是一款较为成熟的试题库学习软件.     

窄粒级煤泥浮选经典动力学模型的改进

通过煤泥窄粒级浮选速率实验,以煤泥浮选一级动力学为基础,对煤泥浮选动力学的关键参数进行研究,包括最大可燃体回收率ε∞的计算、浮选级数n的确定、浮选速率常数K的变化.结果表明:浮选动力学模型中ε∞的经验解比模型解更符合实际;窄粒级煤泥的浮选动力学级数最符合一级动力学;窄粒级煤泥的浮选速率常数K是时间的函数,可用幂函数或经验公式表达,先求出ε∞的经验解,再求解K(t)函数,所得模型非常符合煤泥浮选特征的浮选动力学模型.     

Comparisons of Fly Ash and Deposition Between Air and Oxy-FuelCombustion in Bench-Scale Fluidized Bed with Limestone Addition

In Oxy-fuel circulating fluidized bed, the residual CaO particles may react with high concentration of CO₂ in flue gas to form bonded deposit on heat transfer surfaces in backpass when limestone is used as a sorbent to capture SO₂.In this paper, experiments were designed on ash deposition in a bench-scale fluidized bed under oxy-fuel and air atmosphere. A novel ash deposit sampling probe was used to simulate the tubes of tail surfaces. The chemical composition of fly ash and ash deposit from both air-firing and oxy-fuel firing cases were analyzed by Inductively Coupled Plasma-Atomic Emission Spectrometry(ICP-AES) and Scanning Electron Microscopy(SEM), respectively. The degrees of carbonation reaction of ash deposits were measured by Thermo Gravimetric Analysis. The results showed that there are distinct differences in fly ash deposition rate between oxy-fuel and air firing cases, and oxy-fuel combustion with limestone addition can affect chemical composition of fly ash and ash deposit, especially for elements of Ca, Na, K, and S. However, the carbonation reaction degree of ash deposits is found weak, which is due to the relatively low CaO content in ash deposit or not long enough of the sampling time.[JP]     

长江三角洲地区城乡收入差距测度

基于GE指数相关理论,测度了长江三角洲的城乡收入差距,测算和分析各种收入来源对城乡之间收入差距的影响度,得出了经营性收入对城乡收入差距的贡献率最大、工资性收入其次、财产性收入和转移性收入贡献率最小等结论。     

基于渐开线齿轮范成仪的改进设计

根据渐开线廓范成仪的功能和原理,把老式范成仪的手动操作改为电子控制自动操作,使操作精确方便,经实际使用效果很好,为制造自动式渐线线齿轮范成仪提供参考.     

涡轮增压器叶轮低压铸造工艺设计及优化

采用UG NX8.0对某涡轮增压器叶轮的三维立体图进行有限元网格划分,应用ProCAST对铝合金叶轮的低压铸造充型过程和凝固过程进行数值模拟,利用VisualCAST对产生的缺陷进行可视化的对比,分析浇注温度、模具温度及压力-时间参数对铝液充型状态和凝固顺序的影响,并获得合适的低压铸造工艺参数。对试铸样品进行检测,结果表明:利用ProCAST可对叶轮的低压铸造工艺进行定量优化。     

Preparation of zeolite NaA for CO2 capture from nickel laterite residue

Zeolite NaA was successfully prepared from nickel laterite residue for the first time via a fusion-hydrothermal procedure. The structure and morphology of the as-synthesized zeolite NaA were characterized with a range of experimental techniques, such as X-ray diffraction, scanning electronic microscopy, and infrared spectroscopy. It was revealed that the structures of the produced zeolites were dependent on the molar ratios of the reactants and hydrothermal reaction conditions, so the synthesis conditions were optimized to obtain pure zeolite NaA. Adsorption of nitrogen and carbon dioxide on the prepared zeolite NaA was also measured and analyzed. The results showed that zeolite NaA could be prepared with reasonable purity, it had physicochemical properties comparable with zeolite NaA made from other methods, and it had excellent gas adsorption properties, thus demonstrating that zeolite NaA could be prepared from nickel laterite residue.