载荷谱飞行实测振动环境谱数据处理研究

通过开展飞机振动环境谱的飞行实测,获取飞机设备舱、管路、部分飞机结构等振动环境情况,经过数据处理获取能够反映飞机实际使用下的振动环境数据,给出了典型任务剖面的功率谱密度处理结果,为飞机耐久性/损伤容限优化设计提供依据,进一步提高飞行的安全性和可靠性。     

基于图模型的小尺寸飞行器地面试验中位姿估计方法

在多飞行器地面试验位姿估计中,由于跟踪算法导致的跟踪轨迹不连续会使得位姿估计产生累积误差,为了实现位姿的精确估计,提出了一种基于图模型的全局位姿估计非线性优化方法。首先,建立了一个飞行器地面视觉位姿估计系统。然后根据飞行器上特征点的数目提出了一种向量交叉式的飞行器位姿解算方法,求解得到数据已关联飞行器位姿估计值。利用中介坐标系法求解得到轨迹段初始位姿节点在测量坐标系下的值,最后,在图模型基础上下,对整个量测过程中飞行器的位姿估计结果进行非线性全局优化减小线性算法的累积误差,并通过仿真与实际实验对飞行器位姿估计算法的可行性与精度进行验证。实验结果表明:在测量范围为6 000 mm×6 000 mm×3 000 mm的范围内,飞行器尺寸约为400 mm,特征点三维定位精度为2.9 mm的条件下,基于非线性优化的飞行器位姿估计算法的理论精度分别可达0.5°(3σ)与3 mm (3σ),实际绝对测量精度分别可达1.3°(3σ)与4 mm (3σ),基本满足地面试验对多飞行器编队算法开发以及制导控制系统性能长时间评估稳定可靠、精度高、抗干扰能力强等要求。     

Packet‐level‐based traffic aggregation to optimize NDN content delivery

In recent years, named data networking (NDN) has been accepted as the most popular future paradigm and attracted much attention, of which the routing model contains interest forwarding and content delivery. However, interest forwarding is far from the bottleneck of routing optimization; instead, the study on content delivery can greatly promote routing performance. Although many proposals on content delivery have been investigated, they have not considered packet‐level caching and deep traffic aggregation, which goes against the performance optimization of content delivery. In this paper, we propose a packet‐level‐based traffic aggregation (PLTA) scheme to optimize NDN content delivery. At first, the packet format is devised, and data plane development kit (DPDK) is used to ensure same size for each packet. Then, the whole delivery scheme with traffic aggregation consideration is presented. The simulation is driven by the real YouTube dataset over Deltacom, NSFNET, and CERNET topologies, and the experimental results demonstrate that the proposed PLTA has better delivery performance than three baselines in terms of cache hit ratio, delivery delay, network load, and energy efficiency.     

Dendrite‐Free Lithium Plating Induced by In Situ Transferring Protection Layer from Separator

Lithium (Li) metal anodes are regarded as a promising pathway to meet the rapidly growing requirements on high energy density cells, owing to their highest gravimetric capacity (3840 mAh g^?1) and their lowest redox potential. The application of Li metal anodes, however, is still hindered by undesired dendrites formation and endless consumption of liquid electrolyte due to a continuous reaction on interface of electrolyte/Li‐metal without a stable solid–electrolyte–interface (SEI) layer. A stable protection layer is formed on Li metal anode by in situ transferring the coating layer from polymer separator. The Li anode protection strategy is developed with an in situ formed protection layer transferred through the reduction of a coating layer on polymer separator. A PbZr_0.52Ti_0.48O₃ (PZT) coating layer on polypropylene (PP) separator is reduced by Li metal anode to produce a Pb metal containing composite layer, which could form Pb–Li alloy and adhere to the surface of Li metal anode after the reaction and improves the Li plating/stripping efficiency owing to the formation of a more homogenized electric field. Both the Li/Li symmetric cells and LiFePO₄/Li cells with this PZT precoated PP separators exhibit significantly improved Coulombic efficiency and cycling life.     

国产4H-SiC SI衬底MESFET外延生长及器件研制

以国产衬底实现SiC加工工艺链为目标,采用国产4H-SiC半绝缘衬底材料外延得到4H-SiC MESFET结构材料.外延片XRD半宽43.2 arcs,方块电阻121点均匀性18.39%,随后制备出的具有直流特性的4H-SiC MESFET器件管芯,器件总栅宽250 μm,饱和电流密度680 mA/mm,跨导约为20 mS/mm,在20 V下的栅漏截止漏电为10 μA,2 mA下栅漏击穿电压为80 V.比例占总数的70%以上.初步实现从衬底到外延,进而实现器件的完整工艺链,为进一步的工艺循环打下良好基础.     

A spectral Integral method (SIM) for layered media

A spectral integral method is presented for electromagnetic scattering from dielectric and perfectly electric conducting (PEC) objects with a closed boundary embedded in a layered medium. Two-dimensional layered medium Green's functions are computed adaptively by using Gaussian quadratures. The singular terms in the Green's functions and the non-smooth terms in their derivatives are handled appropriately to achieve exponential convergence. Numerical results, compared with the ones obtained by using other methods, demonstrate the spectral accuracy and high efficiency of the proposed method. They also confirm that the spectral integral method (SIM) is applicable to concave objects.     

Conjugated Polymer Based Nanoparticles as Dual‐Modal Probes for Targeted In Vivo Fluorescence and Magnetic Resonance Imaging

A facile strategy is developed to synthesize dual‐modal fluorescent‐magnetic nanoparticles (NPs) with surface folic acid by co‐encapsulation of a far‐red/near‐infrared (FR/NIR)‐emissive conjugated polymer (PFVBT) and lipid‐coated iron oxides (IOs) into a mixture of poly(lactic‐co‐glycolic‐acid)‐poly(ethylene glycol)‐folate (PLGA‐PEG‐FOL) and PLGA. The obtained NPs exhibit superparamagnetic properties and high fluorescence, which indicates that the lipid coated on IOs is effective at separating the conjugated polymer from IOs to minimize fluorescence quenching. These NPs are spherical in shape with an average diameter of ≈180 nm in water, as determined by laser light scattering. In vitro studies reveal that these dual‐modal NPs can serve as an effective fluorescent probe to achieve targeted imaging of MCF‐7 breast cancer cells without obvious cytotoxicity. In vivo fluorescence and magnetic resonance imaging results suggest that the NPs are able to preferentially accumulate in tumor tissues to allow dual‐modal detection of tumors in a living body. This demonstrates the potential of conjugated polymer based dual‐modal nanoprobes for versatile in vitro and in vivo applications in future.     

LTE核心网中基于PCC的QoS控制和能力开放技术研究

在LTE核心网中,通过引入PCC机制,来实现应用层业务数据流QoS需求到核心网承载层QoS分组过滤器之间的一致性映射和匹配问题。文章在详细介绍和分析LTE核心网中承载层QoS机制和PCC总体架构的基础上,研究如何将二者结合起来实现基于PCC和网络能力开放平台的QoS控制,从而提升运营商掌控网络提供业务的能力并改善用户的业务体验。     

SnO_2压敏材料势垒电压的测量

依照缺陷势垒模型 ,将压敏电阻器视为双向导通的二极管 ,应用半导体理论对低电压情况下的电流 -电压关系数据进行了处理 ,得到了 Sn O2 - Zn O- Nb2 O5压敏材料的势垒电压。选取的 4个测量温度得到的结果是相同的 ,保证了实验结果的正确性。     

WDM系统基于OTN接口的互联互通

本文介绍了新一代波分复用(WDM)系统基于光传送网络(OTN)接口的互联互通技术,包括基于TCMi级联实现的跨域端到端性能监测,并对多厂商WDM系统基于OTN接口的互联互通测试及其未来发展趋势进行简单介绍.