The effect of substrate surface integrity on the surface properties of TiCrN coating applied via the CAE-PVD method

This study aims to investigate how the predeposition machining processes such as magnetic grinding, turning machining, and wire electrical discharge machining can influence the surface properties including electrochemical and tribological behavior of TiCrN nanostructured coating applied on Mo40 steel substrate. A physical vapor deposition technique using cathodic arc evaporation was used to apply the coating. The crystallographic phases and the microstructure of the coating were studied by X-ray diffraction and scanning electron microscope, respectively. Rockwell-C, electrochemical impedance spectroscopy and potentiodynamic polarization, and pin-on-disk wear tests were employed to evaluate the adhesion strength, corrosion behavior, and tribological property of specimens, respectively. The electrochemical results after 24 h of exposure to 3.5 wt% NaCl solution showed that TiCrN coating pretreated with a turning process with polarization resistance of about 3525.32 Ω.cm² had the best corrosion resistance among all specimens. This was because of the improvement of the smoothness, surface quality, and adhesion after the turning process. On the other, the friction coefficient of the grounded sample is less than that of other ones. This is probably due to its higher adhesion strength and higher surface smoothness.     

Rolling element bearings absolute life prediction using modal analysis

In this paper, the authors introduce an experimental procedure for predicting the fatigue life of each individual rolling element bearing separately using vibration modal analysis. The experimental procedure was developed based on a statistical analysis. A statistical analysis was performed to find an empirical model that correlates the dynamic load capacity of rolling bearings to their dynamic characteristics (Natural frequencies and damping). These dynamic characteristics are obtained from the frequency response function of each individual bearing that results from vibration modal analysis. A modified formula to the already known Lundberg-Palmgren life formula is proposed for rolling element bearings. Given the modified formula, one can predict the fatigue life of each individual rolling element bearing based on its dynamic characteristics. The paper compares the results from the modified formula with those from Lundberg-Palmgren formula. The modified formula provides an accurate prediction for the fatigue life of each individual bearing based on its dynamic characteristics. The experimental validation of the modified formula is considered for future work. Therefore, it can be used in various applications of rolling element bearings in machinery systems.     

Biosorption potential of the mediterranean plant (Posidonia oceanica) for the removal of Cu2+ ions from aqueous media : Equilibrium,kinetic, thermodynamic and mechanism analysis

The biosorption characteristics of copper(II) ions using Posidonia oceanica biomass were investigated. Experimental parameters affecting the biosorption process such as pH level, contact time, biosorbent dosage and temperature were studied. The equilibrium data were applied to the Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models. The Langmuir model fitted very well the equilibrium data, and the maximum uptake of Cu(II) by Posidonia oceanica was found to be 76.92 mg/g. The mean free energy E (10.78 kJ/mol) from the D-R isotherm indicated a chemical ion-exchange mechanism. Kinetic results showed that the pseudo-second-order kinetic model was well fitted to the experimental data. Thermodynamic parameters depicted the exothermic nature of biosorption and the process was feasible and spontaneous. The results of FTIR (Fourier-transform infrared spectroscopy) revealed that carboxyl, amine, and hydroxyl groups on the biomass surface were involved in the biosorption of Cu(II) ions.     

Some Studies on Starch Carbamate

Starch carbamate was prepared by reacting maize starch with urea using solid state technique. The different factors affecting this reaction were studied. These factors include urea concentration, type of starch, reaction and duration. The carbamate extent and carbamation reaction efficiency (%) were traced by estimating the nitrogen content of the reaction product. Solubility, viscosity and total ester content of starch carbamate samples were estimated. The carbamate extent increases by increasing urea concentration as well as reaction temperature and duration. Increasing the reaction temperature and duration has the same effect on carbamation reaction efficiency (%), while increasing urea concentration do the reverse. The solubility (%) of starch carbamate samples depends on urea concentration, reaction temperature and duration as well as the type of starch used. The maximum solubility obtained was 63% and 43% for starch carbamate derived from pregelled and native starch, respectively. Tentative mechanism for the reaction between starch and urea has been proposed.     

Room temperature oxidation of acetone by ozone over alumina-supported manganese and cobalt mixed oxides

Volatile organic compounds (VOCs) are among the major sources of air pollution. Catalytic ozonation is an efficient process for removing VOCs at lower reaction temperature compared to catalytic oxidation. In this study, a series of alumina supported single and mixed manganese and cobalt oxides catalysts were used for ozonation of acetone at room temperature. The influence of augmenting the single Mn and Co catalysts were investigated on the performance and structure of the catalyst. The manganese and cobalt single and mixed oxides catalysts of the formula Mn10%-CoX and Co10%-MnX (where X= 0, 2.5%, 5%, or 10%) were prepared. It was found that addition of Mn and Co at lower loading levels (2.5% or 5%) to single metal oxide catalysts enhanced the catalytic activity. The mixed oxides catalysts of (Mn10%-Co2.5%) and (Mn10%-Co5%) led to acetone conversion of about 84%. It is concluded that lower oxidation state of the secondary metal improves ozone decomposition and oxidation of acetone.     

Influence of Chemical Reaction on Mass Transport in Yield Stress Exhibiting Flow Regime

Theoretical Foundations of Chemical Engineering - In this study, the simulations for first-order chemical reactions (constructive and destructive) in the flow of the Casson fluid with...     

CFD simulation of transverse vibration effects on radial temperature profile and thermal entrance length in laminar flow

Radial heat transfer in laminar pipe flow is characterized by a wide temperature distribution over the pipe cross‐section. We use a validated Computational Fluid Dynamics (CFD) model to show that the superimposition of a transverse vibration on the steady laminar flow of a Newtonian fluid moving in a pipe with an isothermal wall, generates considerable chaotic flow and radial mixing which result in a large enhancement in wall heat transfer as well as a considerably more uniform radial temperature field. Transverse vibration also causes the temperature profile to develop very rapidly in the axial direction reducing the thermal entrance length by a large factor. These effects are dependent on vibration amplitude and frequency, and fluid viscosity. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Synthesis,Characterization and Catalytic Activities of Palladium(II) Nitroaryl Complexes

Two palladium(II) nitroaryl complexes trans-[bromo(p-nitrophenyl)bis(triphenylphosphine)palladium(II)] 1 and trans-[bromo(2,4-dinitrophenyl)bis(triphenylphosphine)palladium(II)] 2 have been synthesized. The complexes were characterized by FTIR and NMR (¹H, ¹³C and ³¹P) spectroscopy and elemental analysis. The molecular structure of complex 2, as confirmed by X-ray crystallography, reveals that the Pd atom and its neighboring groups (two PPh₃, Br and phenylene group) lie in a slightly distorted square plane. In the UV–Vis spectra of the complexes 1 and 2, the palladium to aryl charge transfer bands were observed. The emission peaks from the singlet excited states (S₁ → S₀) were observed in the photoluminescence spectra of the complexes. The thermal stability of the complexes has been studied by thermal gravimetric analysis (TGA). TGA data showed that both complexes are thermally stable up to 200 °C, and complex 1 is more stable than 2. The catalytic efficiency of the new palladium(II) complexes was studied as demonstrated using the Sonogashira coupling reactions with good yields. The experimental results suggest that the Sonogashira coupling reactions can be performed at moderate temperature (50 °C) using these new palladium(II) complexes as catalysts.     

Processing of High‐Density Magnesia Spinel Electro‐Conducting Ceramic Composite and its Oxidation at 1400°C

Dense conductive ceramic composites of MgAl₂O₄ and MoSi₂ were processed using combustion synthesis under‐load methodology. The starting reactants were blends of MoO₃, SiO₂, MgO, and Al powders. The study revealed that to obtain dense composite with homogeneous microstructure, 30 wt. % of MoSi₂, 18.5 μm Al average particle size, and 175 MPa load are required. The produced dense composite was found to have a low apparent porosity (<1.0 vol. %), moderate density 4.61 g/cm³, and low electrical resistivity 0.3 Ωcm. The dense composite exhibited excellent thermodynamic stability between its phases at 1400°C in open atmosphere.     

Hydrodynamics and mass transfer study of aliphatic alcohols in airlift reactors

Gas holdup and gas–liquid mass transfer coefficient were considered in an external airlift reactor. Air was sparged through some aliphatic alcohols (methanol, ethanol, n-propanol, and n-butanol) with different concentrations (0–1%, v/v). It was observed that gas holdup and mass transfer coefficient increased with increasing the number of carbons in alcohols. Furthermore, an increment in alcohols concentration increased gas holdup and mass transfer coefficient. The same behavior was observed in external and internal loop airlift reactors although gas holdup and mass transfer coefficient values were less than those of internal airlift reactor. According to the experiments, two correlations for gas holdup and mass transfer were developed.