Estimation of the Surface Energy of Polymer Solids

The methods to estimate the surface tension of polymer solids using contact angles have been reviewed in the first part. They are classified into the following three groups depending on the theories or the equations applied: (1) the methods using the Young's equation alone, (2) the methods using the combined equation of Young and Good-Girifalco, and (3) the methods using the equations of work of adhesion. Some notes and comments are given for each method and results are compared with each other. The two-liquids method for rather high energy surface is also introduced.

Next, some new possibilities to evaluate the surface tension of polymer solids are presented by our new contact angle theory in consideration of the friction between a liquid drop and a solid surface. The advancing and receding angles of contact (θ _a and θ _r ) are explained by the frictional tension γ_F and accordingly two kinds of the critical surface tension γ_C (γ_Ca and γ_Cr ) are given.

This work has shown that one of the recommendable ways to evaluate γ_S is either the maximum γ_LV cos θ_a or the maximum γ_C using the advancing contact angle θ_a alone, and another way is the arithmetic or the harmonic mean of the γ_Ca and γ_Cr . A depiction to determine the γ_C such as ln(1 + cos θ₀ ) vs. γ_LV with cos θ₀ = (cos θ₀ + cos θ_r )/2 has also been proposed.     

Development of Novel Inhibitors for Histone Methyltransferase SET7/9 based on Cyproheptadine

The histone methyltransferase SET7/9 methylates not only histone but also non‐histone proteins as substrates, and therefore, SET7/9 inhibitors are considered candidates for the treatment of diseases. Previously, our group identified cyproheptadine, used clinically as a serotonin receptor antagonist and histamine receptor (H1) antagonist, as a novel scaffold of the SET7/9 inhibitor. In this work, we focused on dibenzosuberene as a substructure of cyproheptadine and synthesized derivatives with various functional groups. Among them, the compound bearing a 2‐hydroxy group showed the most potent activity. On the other hand, a 3‐hydroxy group or another hydrophilic functional group such as acetamide decreased the activity. Structural analysis clarified a rationale for the improved potency only by tightly restricted location and type of the hydrophilic group. In addition, a SET7/9 loop, which was only partially visible in the complex with cyproheptadine, became more clearly visible in the complex with 2‐hydroxycyproheptadine. These results are expected to be helpful for further structure‐based development of SET7/9 inhibitors.     

Photoreaction of Titanium-Based Metal-organic Compounds for Ceramic Fine Patterning

The photoreaction of metal-organic compounds prepared by the chemical modification of metal alkoxides was investigated for the patterning of ceramic films. The chemical stability and photoreactivity of these compounds were found to be greatly influenced by the kind of chemical additive applied during the syntheses of the precursor solutions. In this study, the photoreaction of the precursor thin films prepared by the addition of alkanolamines was achieved by tuning the wavelength of the incident UV light. The decomposition of the organic moieties of the percursors was clearly observed in IR spectra during UV irradiation. Furthermore, the spectrum of the titania precursor film in the visible and ultraviolet regions (UV-vis) changed in accordance with the irradiation time. The photolithography of the titanium precursor pattern was successfully achieved by means of these techniques.     

Giant electric double-layer capacitance of heavily boron-doped diamond electrode

The physical and electrochemical properties of boron-doped polycrystalline diamond electrodes, prepared with various B/C ratio, i.e., 0.1%, 0.5% (BDD-A), 1% (BDD-B), and 5% (BDD-C), were investigated. Electrochemical measurements of the heavily boron-doped films (BDD-C) showed giant electric double-layer capacitance and activity which is significantly larger than BDD-A and BDD-B as well as glassy carbon electrodes. However, interestingly, actual boron concentration of BDD-C was observed to be almost the same as that of BDD-B by secondary ion mass spectroscopy (SIMS) and glow discharge optical emission spectroscopy (GDOES) analysis. It is suggested that the large capacitance is due to a few sp²-bonded carbon impurities, which was observed only in BDD-C, although the amount of the sp²-bonded nondiamond species are very small. In the present work, the reason for the interesting electrochemical properties of heavily boron-doped diamond electrodes is discussed. Furthermore, dimensional stability of the electrodes was also confirmed by conducting harsh anodic treatment.     

Individual pharmacodynamics assessed by antilymphocyte action predicts clinical cyclosporine efficacy in psoriasis

The vector competence of 2 tick species, Ixodes ricinus (L.) and Ixodes scapularis Say, was determined and compared for 3 genospecies of Borrelia burgdorferi. The 3 genospecies of B. burgdorferi used in the following experiments were Borrelia burgdorferi sensu stricto (B-31 and B-31.D1 clone), Borrelia afzelii (strain Pgau. C3), and Borrelia garinii (strain VS286 and VSBP). Spirochetes from all 5 strains were inoculated intradermally into outbred mice; larval ticks of both species were subsequently fed on those mice and replete larvae were assayed for infection by culture in BSK-H media every 7 d for 4 wk. Infection frequencies in I. scapularis exposed to the 5 strains were as follows: B-31 (90%), B-31.D1 (83%), Pgau.C3 (87%), VS286 (10%), and VSBP (5%). The comparable infection frequencies for I. ricinus were B-31 (3%), B-31.D1 (3%), Pgau.C3 (90%), VS286 (5%), and VSBP (3%). Resultant nymphal I. scapularis successfully transmitted B-31, B-31,D1, Pgau.C3, and VS286 to outbred mice. I. ricinus nymphs transmitted Pgau.C3 and VS286. Both species failed to transmit strain VSBP.     

Measurement of High-Temperature Elastic Properties of Ceramics Using a Laser Ultrasonic Method

Young's modulus and Poisson's ratio of SiC ceramics at temperatures >1400°C were obtained using a laser ultrasonics method that included a Fabry-Pérot interferometer (LUFP). At temperatures <1000°C, Young's modulus and Poisson's ratio measured using the LUFP method agreed well with those measured using standard contact methods, such as the resonance method and the ultrasonic pulse method. These results showed that the LUFP method is a powerful tool for measuring high-temperature elastic properties of advanced ceramics in a noncontact manner.     

Vapor generation model for flashing in the initial blowdown phase

A vapor generation model for flashing in the initial blowdown phase is proposed based on a wall nucleation theory and a bubble transport model. Comparisons are made between the proposed model and the TRAC-PF1 model by using the MINCS code through analyses of three blowdown experiments with different scales. The present model well predicts the pressure undershoot in the vessel, while the TRAC model can not predict this typical thermodynamic nonequilibrium phenomenon.     

Synthesis and properties of carbons dispersed with α-iron particles from divinylbenzene-vinylferrocene

α-Iron-dispersed carbon was synthesized, through pressure pyrolysis of divinylbenzene-vinylferrocene above 750°C, and by reduction of magnetite-dispersed carbon. Divinylbenzenevinylferrocene copolymer was pyrolysed at 125 MPa above 750°C to yield carbons dispersed with α-iron accompanied by cementite. Magnetite in the carbon matrix was reduced to α-iron after heat treatments at 500°C in a flow of hydrogen. Carbons synthesized by the pressure pyrolysis of divinylbenzene-vinylferrocene at 800°C and 125 MPa contained iron-compound particles up to 200 nm, whereas the median diameter of α-iron particles in the carbon matrix after reduction treatments was 20 nm. α-Iron-dispersed carbon had a Curie temperature of 770°C. The saturation magnetization of iron-dispersed carbon increased with increasing the pyrolysis temperature of divinylbenzene-vinylferrocene copolymer, and reached a constant value of 183 e.m.u.g⁻¹ at 800°C. The saturation magnetization of α-iron-dispersed carbon after the reduction treatment revealed practically the theoretical value of α-iron. Carbons finely dispersed with only α-iron particles were synthesized successfully by reduction of magnetitedispersed carbons.