Single-grain Si thin-film transistors SPICE model,analog and RF circuit applications

Single-grain thin-film transistors (SG-TFTs) fabricated inside location-controlled using μ-Czochralski process exhibit SOI-FETs like performance despite processing temperatures remaining below 350 °C. Thus, the SG-TFT is a potential technology for large-area highly-integrated electronic system and system-in-package, taking advantage of the system-on-flexible substrate and low manufacturing cost capabalities. The SG-TFT is modeled based on the BSIMSOI SPICE model where the mobility parameter is modified to fit the SG-TFT behavior. Therefore, analog and RF circuits can be designed and benchmarked. A two-stage telescopic cascode operational amplifier fabricated in a prototype 1.5 μm SG-TFT technology demonstrates DC gain of 55 dB and unity-gain bandwidth of 6.3 MHz. A prototype CMOS voltage reference demonstrates a power supply rejection ratio (PSRR) of 50 dB. With unity-gain frequency, f_T, in the GHz range, the SG-TFT can also enable RF circuits for wireless applications. A 12 dB gain RF cascode amplifier with integrated on-chip inductors operating in the 433 MHz ISM band is demonstrated.     

自组织InAs/GaAs量子点的表面氮化研究

用低温光荧光(PL)和透射电子显微镜(TEM)研究了表面氮化自组织InAs/GaAs量子点的光学性能和微观结构。结果表明氮化后形成薄层的InAsN薄膜作为应变缓和层覆盖在量子点的表面,使得随着氮化时间的增加,InAs量子点的位错密度提高、尺寸变大、纵横比提高、发光波长变长、强度变低。     

1.5%-/spl Delta/ athermal arrayed-waveguide grating multi/demultiplexer with very low loss groove design

We describe a compact 1.5%-/spl Delta/ athermal silica-based 100-GHz-spacing 16-channel arrayed-waveguide grating (AWG) multi/demultiplexer with a modified groove design for a very low excess loss. We propose new approaches for modifying the shape of the grooves and the arrayed waveguides and optimize the shape modifications for 1.5%-/spl Delta/ waveguides. By employing this modified groove design, we greatly reduced the groove excess loss from 1.9 to 0.4 dB in the 1.5%-/spl Delta/ athermal AWG.     

Low-loss athermal silica-based lattice-form interleave filter with silicone-filled grooves

We describe a low-loss athermal silica-based interleave filter with a lattice-form structure. We athermalize the filter by using a silicone-filled groove formed in each delay line and we employ a low-loss design to reduce the accumulated groove excess loss in the multiple delay lines. By using these designs, we obtained a very low groove excess loss of 0.4 dB and achieved satisfactory temperature insensitivity and optical characteristics with this filter.     

Extremely low-loss 1.5%-/spl Delta/ 32-channel athermal arrayed-waveguide grating multi/demultiplexer

A silica-based 1.5%-/spl Delta/ 100 GHz-spacing 32-channel athermal arrayed-waveguide grating (AWG) with compact size and extremely low insertion loss is described. By reducing the fibre coupling loss and the excess loss in a silicone-filled groove, an insertion loss of 1.3 dB was achieved with this athermal AWG.     

Pipelined delay-sum architecture based on bucket-brigade devices for on-chip ultrasound beamforming

A pipelined delay-sum architecture based on bucket-brigade devices is proposed as an analog beamformer for integrated far-field steering scanning of a micromachined piezoelectric ultrasonic sensor phased array. The prototype beamformer, fabricated with an 8-/spl mu/m standard CMOS process, exhibits a total harmonic distortion of -45 dB, dynamic range of more than 65 dB, and beamforming imperfection of less than -50 dB using a 100-kHz input signal with peak voltage of 400 mV.     

ID/Locator Split-Based Mobility Scheme for Heterogeneous New Generation Network

The new generation network or the future Internet should treat mobile hosts as first-class objects and allow them to move freely across different networks that use heterogeneous protocols. For this purpose, this paper presents a mobility scheme, designed on the basis of the ID/locator split concept. The scheme provides mobility support from the identity layer, a shim layer inserted between the transport and network layers in the new generation network architecture. Mobility functions are independent of network layer protocols, thus they support mobility across heterogeneous network protocols. These functions are distributed in both end hosts and edge routers so that the scheme provides seamless mobility by reducing handover delay and consequent interruption in communication sessions.     

Degradation evaluation of poly-Si TFTs by comparing normal and reverse characteristics and behavior analysis of hot-carrier degradation

We propose degradation evaluation of poly-Si TFTs by comparing normal and reverse characteristics. Since symmetrical normal and reverse characteristics indicate Joule-heating degradation whereas asymmetrical characteristics indicate hot-carrier degradation, they can be clearly and easily classified. Moreover, degradation occurrence is contrasted between standard and fine TFTs. Finally, behavior of the hot-carrier degradation is analyzed.     

Controllable 1D Patterned Assembly of Colloidal Quantum Dots on PbSO4 Nanoribbons

Control of the 1D self‐assembly pattern of colloidal quantum dots (QDs) on PbSO₄ nanoribbon (NRb) templates is achieved. The internal structure of the NRbs is investigated by X‐ray diffraction, revealing the isotropic packing of the PbSO₄ nanoclusters in the NRbs. Colloidal QDs in a chloroform/hexane mixture are adsorbed onto the region close to the edges of the NRbs and form a 1D assembly of straight single line or double lines by controlling the amount of OAm. This is the first demonstration of a densely packed 1D self‐assembly of colloidal QDs with a straight line pattern without the use of any molecular bridge or adhesive. Atomic force microscopy measurements of the NRbs show depressions in the phase profile along the width of the NRbs, corresponding to the position of the 1D QD chain. The amount of adsorbed QDs on the NRbs in solution decreases as the addition of OAm increases, suggesting that additional OAm prevents interaction between the QDs and NRbs but facilitates the uniform adsorption of the 1D assembly. The low‐dimensional self‐assembly of colloidal QDs in this study opens up the possibility for the creation of anisotropically assembled QD superstructures.     

Durable Ultraflexible Organic Photovoltaics with Novel Metal‐Oxide‐Free Cathode

Flexible and stretchable organic photovoltaics (OPVs) are promising as a power source for wearable devices with multifunctions ranging from sensing to locomotion. Achieving mechanical robustness and high power conversion efficiency for ultraflexible OPVs is essential for their successful application. However, it is challenging to simultaneously achieve these features by the difficulty to maintain stable performance under a microscale bending radius. Ultraflexible OPVs are proposed by employing a novel metal‐oxide‐free cathode that consists of a printed ultrathin metallic transparent electrode and an organic electron transport layer to achieve high electron‐collecting capabilities and mechanical robustness. In fact, the proposed ultraflexible OPV achieves a power conversion efficiency of 9.7% and durability with 74% efficiency retention after 500 cycles of deformation at 37% compression through buckling. The proposed approach can be applied to active layers with different morphologies, thus suggesting its universality and potential for high‐performance ultraflexible OPV devices.