Reliability of multilayer ceramic capacitors with nickel electrodes

The reliability of multilayer ceramic capacitors (MLCCs) with Ni internal electrodes has been studied trom the viewpoint of partial oxygen pressure (P_O2) during firing. It is shown that the load-life time of the insulation resistance (1R) was prolonged by firing under low Po₂ annealing after firing, and the addition of dopants. It is also shown that the generation of oxygen vacancies led to the degradation of IR. Annealing treatment for the oxidation of the dielectric body accelerates the dielectric aging of MLCCs. It is found that the appropriate control of the P_O2 during firing can improve the reliability of MLCCs with Ni electrodes to a level as high as that of MLCCs with precious metal electrodes. Thus, we have developed an MLCC with Ni electrodes that features high reliability and a large capacitance of 10 μF for the Y5V characteristic and 4.7 μF for the X7R characteristic, both in the case of the C3216 (3.2 mm × 1.6 mm × 1.4 mm) form.     

Purification and Characterization of a Maltotriogenic α-Amylase I and a Maltogenic α-Amylase II Capable of Cleaving α-1,6-Bonds in Amylopectin

Extracellular α-amylases I and II, produced by a facultative thermophile Bacillus thermoamyloliquefaciens KP 1071 capable of growing at 30–66°C, were purified to homogeneity. α-Amylase I consisted of a single polypeptide with methionine residue at the NH₂-terminus. α-Amylase II consisted of two equivalent polypeptides each comprising a methionine at the NH₂-terminus. α-Amylase I hydrolyzed endotypically α-1,4-bonds in glycogen, amylopectin and β-limit dextrin, but not their α-1,6-bonds. α-Amylase II degraded amylopectin and β-limit dextrin in exo-fashion by cleaving preferentially α-maltose units from the non-reducing ends and hydrolyzing their α-1,6-branch points. α-Amylase II hydrolyzed maltotriose, phenyl-α-maltoside, α- and β-cyclodextrins and pullulan, whereas α-amylase I had no activity for all these sugars. α-Amylases I and II hydrolyzed maltotetraose, maltopentaose, α-limit dextrin and amylose, but they were inactive for maltose, isomaltose and panose. It was suggested that α-amylase I is the most thermostable type of hitherto known maltotriogenic endo-acting α-amylases, and α-amylase II is the first maltogenic exo-acting α-amylase able to split α-1,6-bonds in amylopectin.     

Research and development of liquid hydrogen (LH2) temperature monitoring system for marine applications

Monitoring the temperature in liquid hydrogen (LH₂) storage tanks on ships is important for the safety of maritime navigation. In addition, accurate temperature measurement is also required for commercial transactions. Temperature and pressure define the density of liquid hydrogen, which is directly linked to trading interests. In this study, we developed and tested a liquid hydrogen temperature monitoring system that uses platinum resistance sensors with a nominal electrical resistance of approximately 1000 Ω at room temperature, PT-1000, for marine applications. The temperature measurements were carried out using a newly developed temperature monitoring system under different pressure conditions. The measured values are compared with a calibrated reference PT-1000 resistance thermometer. We confirm a measurement accuracy of ±50 mK in a pressure range of 0.1 MPa–0.5 MPa.     

Pulse Combustors - Performance and Control

~nonEmphasising time characterishcs and contIDI, onlyfew workll'v is av'ailable among the numerous reports onPulse combustors. Rare work deals with tWin Pulsecombustorsls] or combined pulse combustor-"dinesystemsl']. Kenffield15] obtained with a combinedconvenhonal Pulse combustor-tulbine system acombushon Pressals gain of 3-7% and a totalPerformance Of the combustor-"dine system for Pulsecombushon 40% higher than that of steady'combushonwhat aught also be due tO the brine characteristics.…     

Analyses of reactor building by 3D nonlinear FEM models considering basemat uplift for simultaneous horizontal and vertical ground motions

The nonlinear behavior of basemat uplift, which is an important point in seismic designs of nuclear power plants in Japan, has been investigated by arranging joint elements between the reactor building basemat and the soil on a three-dimensional (hereafter referred to as 3D) FEM model of the soil. However, the nonlinearity of the basemat uplift has been investigated separately from the nonlinearity of reactor buildings. These nonlinearities have yet to be taken into account simultaneously in past studies. In this paper, models of the building and the soil using 3D FEM elements with consideration to the nonlinearity of building materials as well as the nonlinearity of the basemat uplift were subjected. The behavior of the building's elements were investigated by carrying out seismic response analyses for horizontal ground motions only, as well as for simultaneous horizontal and vertical ground motions using these models. As a result, it was found that there was little difference in the horizontal response of the building between the horizontal input motions only and the simultaneous horizontal and vertical input motions. The effects of the vertical ground motions on the basemat uplift behavior which is represented by the ground contact ratio were also slight.     

Microstructure of ion-implanted region in TiNi alloy

TiNi alloy samples implanted with various fluences of 3 MeV Cu²⁺ ions were characterized by transmission electron microscope (TEM) and X-ray diffractometer. Cross-sectional TEM images of the samples showed that amorphous region was seen at the fluence of 10¹⁴ ions cm^?2 in case of ion implantation at 300 K of the substrate temperature, but in case of ion implantation at 100 K it did not appear even at 10¹⁵ ions cm^?2. These results were also confirmed by X-ray diffraction profiles of the same samples. Consequently, the extent of microstructure change of TiNi alloy by ion implantation was different depending on the substrate temperature.     

Unique crystal structures and their applications as materials for Li1+x-yM1-x-3yTix+4yO3 (M = Nb or Ta, 0.07 ≤ x ≤ 0.33, 0 ≤ y ≤ 0.175)

In the Li₂O–M₂O₅–TiO₂ (M = Nb or Ta) system, Li_1+x-yM_1-x-3yTi_x+4yO₃ (LMT) forms with a superstructure known as the M-phase, in which the periodical intergrowth layers are inserted in a matrix having a trigonal structure of LiMO₃. We have been investigating this unique material focusing on its crystal structure, photoluminescence, and electrical properties.First, the formation area of the superstructure was compared between Nb- and Ta- systems and the difference was accurately analyzed.Second, to apply this unique material as a host material of phosphor, we synthesized new phosphors with various emission colors. Red phosphor, having a high PL intensity with an internal quantum efficiency of 98%, was successfully synthesized and used as a host material of the solid solution for the Ta system. Its high value was the result of the large centroid-to-cation distance of the Eu³⁺ position in the [(Li, Eu)O₁₂] polyhedral.Further still, toward application of the unique qualities of an electro-ceramic, we successfully fabricated oriented balk ceramics for the Nb system by slip casting in a strong magnetic field of 12 T. As a result, anisotropic electric properties were found along the c-axis, which were caused by the superstructure. We first clarified the mechanism showing that the anisotropic Qf value was due to anisotropic electron conductivity and anisotropic bonding strength within the superstructure.     

Expression of a gene encoding chitinase (pCA 8 ORF) from Aeromonas sp. no. 10S-24 in Escherichia coli and enzyme characterization

A gene encoding chitinase from Aeromonas sp. no. 10S-24 was expressed using pTrc99A in Escherichia coli JM 105 which yielded a 5-fold higher activity than when pUC19 was used. Three different truncated enzymes (SA-1, SA-2 and SA-3) were obtained after purification. Their isoelectric points were 7.0, 6.9, and 6.7, respectively. The enzymes showed two optimum pHs, 4.0 and 7.0, when incubated with ethylene glycol chitin as the substrate, and were stable over a wide pH range (3.0-9.0). The optimum temperature was 60 degrees C and the enzymes were stable up to 50 degrees C. The chitinases exhibited wide substrate specificities for chitin-related compounds.     

PLL-based BiCMOS on-chip clock generator for very high-speedmicroprocessor

Described is a phase-locked loop (PLL)-based BiCMOS on-chip clock generator (PCG), which is used to generate an internal clock synchronized to a reference clock from outside the chip. In order to obtain a very wide operation bandwidth, it is proposed that the PCG include a compensation circuit for voltage-controlled oscillator (VCO) operation. The compensation circuit varies the oscillation bandwidth of the VCO according to the reference clock frequency, preventing the expected oscillation frequency from being outside the oscillation bandwidth. The PCG is designed and fabricated with 1.0 μm BiCMOS technology, and it achieves an operation bandwidth of 3 to 90 MHz     

Transient phase conjunction in a two-level system

An analytical expression for conjugate signals is developed for a case where three rectangular pulses with the same center frequency are injected into a two-level system. The Maxwell's equation is solved with the slowly varying envelope approximation and with the perturbative third-order nonlinear polarization expression of a two-level system. Numerical examples are discussed in such a way that the input pulsewidth is changed relative to the energy relaxation and dephasing times. As the optical pulsewidth becomes short, ripples appear in the signal pulse due to the beat between the optical field and the resonant oscillation of the atomic system