Phase Relations and Volume Changes of Hafnia under High Pressure and High Temperature

Using multi-anvil high-pressure devices and synchrotron radiation, X-ray in situ observations of HfO₂ under high pressure and high temperature have been performed to investigate its phase relations and compression behavior. An orthorhombic phase (orthoI) is stable from 4 to 14.5 GPa below 1250°–1400°C and transforms to a tetragonal phase, which is one of the high-temperature forms of HfO₂, above these temperatures. Another orthorhombic phase (orthoII) with a cotunnite-type structure appears above 14.5 GPa. OrthoII is stable up to 1800°C at 21 GPa. OrthoII is quenchable to ambient conditions. The orthoI-to-orthoII transition is accompanied by ∼8 vol% decrease. The bulk moduli of orthoI and orthoII at room temperature are 220 and 312 GPa, respectively. This low compressibility of orthoII indicates that it is a potential candidate for very hard materials.     

Focus on Extracellular Vesicles: Development of Extracellular Vesicle-Based Therapeutic Systems

Many types of cells release phospholipid membrane vesicles thought to play key roles in cell-cell communication, antigen presentation, and the spread of infectious agents. Extracellular vesicles (EVs) carry various proteins, messenger RNAs (mRNAs), and microRNAs (miRNAs), like a “message in a bottle” to cells in remote locations. The encapsulated molecules are protected from multiple types of degradative enzymes in body fluids, making EVs ideal for delivering drugs. This review presents an overview of the potential roles of EVs as natural drugs and novel drug-delivery systems.     

Application of Near-Infrared Spectroscopy for Evaluation of Drying Stress on Lumber Surface: A Comparison of Artificial Neural Networks and Partial Least Squares Regression

This study aimed to examine the feasibility of evaluating the stress level at the surface of lumber during drying using near-infrared (NIR) spectroscopy combined with artificial neural networks (ANNs). Sugi (Cryptomeria japonica D. Don) lumber with an initial moisture content ranging from 41.1 to 85.8% was dried using a commercial drying schedule. An ANN model for predicting surface-released strain (SRS) was developed based on NIR spectra collected from the lumber during drying. The predictive ability of the ANN model was compared with a partial least squares (PLS) regression model.

The ANN model showed good correlation between laboratory-measured SRS and predicted SRS with an R ² of 0.79, a root mean square error of prediction (RMSEP) of 0.0009, and a ratio of performance to deviation (RPD) of 1.81. The PLS regression model gave a lower R ² of 0.69, a higher RMSEP of 0.0010, and a lower RPD of 1.38 than the ANN model, suggesting that the predictive performance of the ANN model was superior to the PLS regression model. The SRS evolution during drying as predicted by the models showed a similar trend to the laboratory-measured one. The predicted elapsed times to reach maximum tensile SRS and stress reversal roughly coincided with the laboratory-measured times. These results suggest that NIR spectroscopy combined with multivariate analysis has the potential to predict the drying stress level on the lumber surface and the critical periods during drying, such as the points of maximum tensile stress and stress reversal.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.     

Effect of Talc Size on Surface Roughness and Glossiness of Polypropylene Injection Molding Application to Automotive Plastics

Talc-containing polypropylene (PP) resin is extensively employed in automobiles. Herein, considering the microstructure transfer process in injection molding, the effect of the talc's dispersibility and particle size on this process and its impact on the gloss level of the product were investigated. Results show that a fine unevenness of about several micrometers was self-formed by the shrinkage of PP in nontransferred areas due to the blending of talc. Additionally, the amount of self-formed unevenness tended with an increase in the average particle size of talc. Furthermore, due to PP shrinkage and different densities of talc, it was observed that a fine tiger-stripe pattern was self-formed using special molds with modified microstructure. This self-formed fine unevenness changes the gloss level owing to the diffused light reflection effect. This study proposes controlling this change by controlling the average particle size of talc and structure of the mold. POLYM. ENG. SCI., 60:132–139, 2020. © 2019 Society of Plastics Engineers     

Direct ethanol production from barley beta-glucan by sake yeast displaying Aspergillus oryzae beta-glucosidase and endoglucanase

Three beta-glucosidase- and two endoglucanase-encoding genes were cloned from Aspergillus oryzae, and their gene products were displayed on the cell surface of the sake yeast, Saccharomyces cerevisiae GRI-117-UK. GRI-117-UK/pUDB7 displaying beta-glucosidase AO090009000356 showed the highest activity against various substrates and efficiently produced ethanol from cellobiose. On the other hand, GRI-117-UK/pUDCB displaying endoglucanase AO090010000314 efficiently degraded barley beta-glucan to glucose and smaller cellooligosaccharides. GRI-117-UK/pUDB7CB codisplaying both beta-glucosidase AO090009000356 and endoglucanase AO090010000314 was constructed. When direct ethanol fermentation from 20 g/l barley beta-glucan as a model substrate was performed with the codisplaying strain, the ethanol concentration reached 7.94 g/l after 24 h of fermentation. The conversion ratio of ethanol from beta-glucan was 69.6% of the theoretical ethanol concentration produced from 20 g/l barley beta-glucan. These results showed that sake yeast displaying A. oryzae cellulolytic enzymes can be used to produce ethanol from cellulosic materials. Our constructs have higher ethanol production potential than the laboratory constructs previously reported.     

Preparation of raspberry‐like poly(methyl methacrylate) particles by seeded dispersion polymerization

The facile preparation of nonspherical raspberry‐like poly(methyl methacrylate) (PMMA) particles by seeded dispersion polymerization of methyl methacrylate (MMA) on micron‐sized PMMA seed particles was described. Various polymerization parameters influencing the particle morphology, as well as the polymerization kinetic and morphological stability, were investigated in detail. It was found that the following polymerization conditions were necessary to prepare this kind of nonspherical particles: a relatively low temperature, an appropriate ratio of seed/MMA, an initiator with a relatively low decomposition rate, and a relatively low initiator concentration. These particles showed very good morphological stability at room temperature, but they changed to the spherical ones when heat treated at 60°C in methanol solution of MMA. The experimental results suggest that the prepared PMMA particles were kinetically favored and the localized polymerization of the MMA monomer on PMMA seed particle surface was responsible for the formation of the raspberry‐like particles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures

The purpose of this research is to characterize the cryogenic delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates subjected to Mode II fatigue loading. Mode II fatigue delamination tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K) using the four-point bend end-notched flexure (4ENF) test method, and the delamination growth rate data for the woven GFRP laminates were obtained. The energy release rate range was determined by the finite element method. Microscopic examinations of the specimen sections and fracture surfaces were also carried out. The present results are discussed to obtain an understanding of the fatigue delamination growth mechanisms in the woven GFRP laminates under Mode II loading at cryogenic temperatures.     

Electrochemical analysis of perpendicular mesoporous Pt electrode filled with pure water for clarifying the active region in fuel cell catalyst layers

A perpendicular mesoporous platinum film is used as a model electrode to clarify the effectiveness of catalysts inside agglomerates of fuel cell catalyst layers on the basis of experimental facts. The analysis clarifies that: (i) Pt surface even apart from Nafion ionomer phase can be electrochemically active; (ii) its response is different from that of the surface covered with ionomer; and (iii) ionic resistance in pores filled with pure water is too high (ca. 0.18 MΩ cm) for fuel cell reactions to smoothly occur. We conclude that such catalysts in pores filled with pure water are ineffective for fuel cell reactions due to the high ionic resistance, though their catalytic activity is possibly higher than that of the catalysts covered with Nafion.