A three-phase voltage-source neutral-point-clamped converter with divided capacitors

A new method for reducing harmonics involved in ac line currents of a three-phase voltage-source converter is proposed. It is applied to the conventional neutral-point-clamped inverter. By dividing a smoothing capacitor into four elements and adding four auxiliary switching devices, the input line-to-line voltages of the proposed converter can be made to have almost the same waveforms as a conventional 18-phase rectifier with 18 devices and three input transformers. In this paper, circuit performance and input voltage waveforms are discussed, and the optimum parameters are determined. Effects of harmonic reductions can be clarified by theoretical results. We suggest several output voltage adjustment methods. Characteristics of power factors and distortion factors in these methods are theoretically and experimentally investigated. © 1997 Scripta Technica, Inc. Electr Eng Jpn, 121(2): 72–82, 1997     

Synthesis of deoxy(thiosulfato)chitin as the precursor for noncatalytic photoinduced graft copolymerization

Photoinduced graft copolymerization of vinyl monomers onto deoxy(thiosulfato)chitin (S₂O₃–chitin) has been studied. Chitin was first tosylated and subsequently transformed into S₂O₃–chitin. S₂O₃–chitin has good solubility over tosyl–chitin. Graft copolymerization of S₂O₃–chitin proceeded very easily by ultraviolet irradiation without catalyst. Photolysis of S₂O₃ groups was confirmed by infrared spectra. But the photolysis occurred only in quartz, not in a Pyrex tube. Methyl methacrylate (MMA) and acrylonitrile showed good grafting activities. In the case of acrylic acid and acryl amide, homopolymer formation was predominant, and the degree of grafting was low. We chose the MMA monomer for further information. The grafting rate of S₂O₃–chitin using MMA was much faster than those of chitin and O‐acetyl–chitin. Under the appropriate conditions, the degree of grafting reached 600% only in 2 h, and the grafting efficiency was over 75% in any monomer concentration. But addition of DMSO into the polymerization system decreased the degree of grafting. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 189–195, 1999     

Recovery of serum proteins using cellulosic affinity membrane modified by immobilization of CU2+ ion

An affinity membrane was prepared from a porous cellulose membrane, and adsorption and recovery of serum proteins were investigated from the viewpoint that affinity membranes are efficacious against separation and purification of biomaterials. Into the cellulose membrane, iminodiacetate (IDA) group that acts as a ligand to metal ions was introduced (Cell–IDA membrane), and then Cu²⁺ ion was immobilized (Cell–IDA–Cu membrane). Bovine serum albumin (BSA) and γ-globulin (BγG), which are the major proteins in blood, were adopted as model proteins to be separated. The Cell–IDA–Cu membrane had large adsorption capacity for these proteins despite the low degree of modification. The amounts of proteins adsorbed on the Cell–IDA–Cu membrane increased with increasing pH, and BγG was adsorbed more than BSA. High protein recoveries from the Cell–IDA–Cu membrane were obtained. The separation of these proteins was also conducted under the optimum conditions of adsorption and recovery, and BγG was concentrated more than BSA although the initial concentration of BγG was lower than that of BSA. © 1996 John Wiley & Sons, Inc.     

Asymmetric Synthesis of 2‐Substituted Dihydrobenzofurans and 3‐Hydroxydihydrobenzopyrans through the Enantioselective Epoxidation of O‐Silyl‐Protected ortho‐Allylphenols

The Shi‐type epoxidation of O‐tert‐butyldiphenylsilyl (TBDPS) protected o‐allylphenols serves as an efficient strategy to construct the dihydrobenzofurans and dihydrobenzopyrans in up to 97% ee. This methodology led to the enantioselective synthesis of (+)‐marmesin, (−)‐(3′R)‐decursinol, and (+)‐lomatin.     

Phenotypic abnormalities observed in aged cloned mice from embryonic stem cells after long-term maintenance

Somatic/embryonic stem cell cloning has made it possible to produce an individual genomically identical to another individual. However, the cloned animals have a variety of abnormalities caused by the aberrant gene modification, with insufficient reprogramming in cloning. We previously reported abnormalities in cloned mice at birth. In this study, we examined what abnormalities could be seen in cloned mice after long-term maintenance. The aged cloned mice showed multiple abnormalities: increase of body weight, some phenotypic abnormalities in the kidneys, testes and thymus, and lower urea nitrogen in their serum biochemical values. The kidneys of all cloned mice were hypertrophied, with a metamorphic or whitish appearance. The multiple lesions, including the enlarged renal pelvis and distension of the renal veins in histology, might be the result of urine accumulation by urinary tract obstruction. The testes of the cloned mice were atrophied, and showed no sperm formation in histology. In contrast, the thymus was rather hypertrophied, and a comparably increased number of lymphocytes were observed in the medulla, consisting mainly of T cells. By conducting a progeny test between the cloned mice, it was confirmed that these abnormalities in the aged cloned mice were not transmitted to their offspring, indicating that the incomplete reprogramming in clones might be in part responsible for the abnormalities detected in aged clones. These results indicate that the postnatal abnormalities observed in aged cloned mice are varied and can be restored through the germ line.     

Bending loss of elliptical-hole core circular-hole holey fibers bent in arbitrary bending directions

A holey fiber having a core with an elliptical-hole lattice structure, which is referred to as an elliptical-hole core circular-hole holey fiber (EC-CHF), can be easily designed as a single-polarization fiber by using the fundamental space-filling modes of the core and cladding lattices. However, because the guided mode in an EC-CHF has a polarization that arises from the large geometric anisotropy of the core lattice, the influence of the bending direction on the bending loss is a crucial issue for the practical implementation of EC-CHFs. Here, the bending losses of an EC-CHF bent in arbitrary angular orientations with respect to the core cross section are calculated numerically using the equivalent anisotropic step-index circular fiber model for a real EC-CHF, and the influence of the bending direction of the fiber on the bending loss is discussed.     

Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique

The three-dimensional microstructure of an SOFC anode is quantified using a dual beam focused ion beam scanning electron microscopy (FIB-SEM) system equipped with an energy dispersive X-ray spectroscopy (EDX) unit. The microstructure of the Ni-YSZ anode is virtually reconstructed in a computational field using a series of acquired two-dimensional SEM images. The three-phase boundary (TPB) density and tortuosity factors are carefully evaluated by applying two different evaluation methods to each parameter. The TPB density is estimated by a volume expansion method and a centroid method, while the tortuosity factors are evaluated by a random walk calculation and a lattice Boltzmann method (LBM). Estimates of each parameter obtained by the two methods are in good agreement with each other, thereby validating the reliability of the analysis methods proposed in this study.     

Novel structured yttria-stabilized zirconia coatings fabricated by hybrid thermal plasma spraying

Yttria-stabilized ZrO₂ powders with initial sizes of 5–22 mm were chsosen as feedstock for hybrid thermal plasma deposition. At 100 kW RF input power, the microstructures of the deposited coatings varied from mostly sprayed splats to physical-vapor-deposited nanostructures when the powder feeding rate was reduced from 4 to 1 g/min. At a powder feeding rate of 2 g/min, a peculiar layered coating consisting of both structures was deposited at a rate over 50 mm/min, which is promising for the fabrication of next-generation novel thermal barrier coatings.     

Simulation Analysis for Massive Deployment of Variable Renewables Employing an Optimal Power Generation Mix Model

This paper develops a high time-resolution optimal power generation mix model in its time resolution of 10 minutes on 365 days by linear programming technique. The model allows us to analyse the massive deployment of photovoltaic system and wind power generation in power system explicitly considering those short-term output variation. PV （photovoltaic） and wind output are estimated, employing meteorological database. Simulation results reveal that variable fluctuation derived from a high penetration level of those renewables is controlled by quick load following operation of natural gas combined cycle power plant, pumped-storage hydro power, stationary NAS （sodium and sulfur） battery and the output suppression control of PV and wind. It additionally turns out that the operational configuration of those technologies for the renewable variability differs significantly depending on those renewable output variations in each season and solving the seasonal electricity imbalance as well as the daily imbalance is important if variable renewables are massively deployed.