弹性杆与水下壳体接触冲击的冲击力计算研究

对弹性杆与水下壳体接触冲击问题进行了研究，用有限元法模拟壳体，边界无法模拟无限域流体，通过温面上的耦合条件进行联立求解，文中给出了典型算例，并进行了有关讨论。     

A generalized suboptimum unequally spaced channel allocationtechnique. I. In IM/DD WDM systems

Four-wave mixing (FWM) is the most serious fiber nonlinearity associated with low-input optical power levels in long-haul multichannel optical systems employing dispersion-shifted fiber. To reduce the crosstalk due to FWM, a generalized suboptimum unequally spaced channel allocation (S-USCA) technique is proposed and investigated. Even though the developed technique is useful in combating FWM crosstalk in wavelength division multiplexing (WDM) lightwave systems with up to 12 channels, its main virtue is in designing multichannel WDM lightwave systems with more than 12 channels. Comparisons of power penalty due to FWM between equal channel spacing (ECS) systems and the S-USCA systems are presented. It is shown that for an intensity modulation/direct detection (IM/DD) transmission system operating in an optical bandwidth of 16 nm with 0 dBm (1 mW) peak optical input power per channel, while a conventional ECS WDM system with 0.84-nm channel spacing cannot even achieve a bit-error rate (BER)=10^-9, the suboptimum technique developed in this paper, for the same minimum channel spacing, can achieve a BER=10^-9 with an FWM crosstalk power of less than 1 dB at the worst channel in a 20-channel WDM system     

Planar-shape prototype generation using a tree-based random greedy algorithm.

A prototype is representative of a set of similar objects. This paper proposes an approach that formulates the problem of prototype generation as finding the mean from a given set of objects, where the prototype solution must satisfy certain constraints. These constraints describe the important perceptual features of the sample shapes that the proposed prototype must retain. The contour prototype generated from a set of planar objects was used as an example of the approach, and the corners were used as the perceptual features to be preserved in the proposed prototype shape. However, finding a prototype solution for more than two contours is computationally intractable. A tree-based approach is therefore proposed in which an efficient greedy random algorithm is used to obtain a good approximation of the proposed prototype and analyze the expected complexity of the algorithm. The proposed prototype-generation process for hand-drawn patterns is described and discussed in this paper.     

Study of warpage due to P-V-T-C relation of EMC in IC packaging

There were many studies about the prediction of warpage due to thermal mismatch , . However, cure induced warpage is usually ignored and the results can be inaccurate. To minimize this problem, a thorough understanding of epoxy molding compound (EMC) with pressure-volume-temperature-cure (P-V-T-C) relation is necessary. This paper used the P-V-T-C relation of an encapsulation material to formulate the stress-strain relationship. With the help of finite element method (FEM) and mold flow analysis, warpage predictions combined with P-V-T-C relation were performed and the results show that this approach is practical. For a given P-V-T-C relation, the shrinkage direction is pointing toward the gate and maximum warpage usually occurs at the boundary of an integrated circuit (IC) package. Variation of specific volume difference along the flow direction is larger than that perpendicular to the flow direction. When temperature difference is small in thickness direction, specific volume difference in thickness direction varies only slightly.     

Plastic deformation in a multifunctional Ti-Nb-Ta-Zr-O alloy

Mechanisms for plastic deformation in the newly developed Ti-24 at. pct (Ta + Nb + V)-(Zr,Hf)-O alloys (Gum Metal) were investigated in relation to their unique properties. Transmission electron microscopy revealed that the microstructure after deformation was characterized by highly distorted crystal images, which are accompanied by numerous “giant faults.” Such plastic behavior implies that a large amount of elastic stain energy was stored discretely and hierarchically during cold working. Calculated elastic constants of the Ti-X (Nb,Ta,Mo,V) binary systems predicted that Young’s modulus in 〈001〉 and shear moduli along some directions including slip systems in a bcc crystal were extraordinary small. The low modulus not only well explains the highly distorted microstructure observed in the cold-worked specimens, but also signifies that ideal shear strength of the developed alloys is a very small value, which is close to the practical strength required for plastic deformation in the alloy. This implies that the giant faults observed in the deformed specimen were formed without the aid of dislocation glide.     

On Striping Traffic over Multiple IEEE 802.11(b) Wireless Channels

Due to interference, path loss, multipath fading, background noise, and many other factors, wireless communication normally cannot provide a wireless link with both a high data rate and a long transmission range. To address this problem, striping network traffic in parallel over multiple lower-data-rate but longer-transmission-range wireless channels may be used. In this paper, we propose a new striping method and evaluate its performances over multiple IEEE 802.11(b) channels under various conditions. Our extensive simulation results show that this method is quite effective for such an application. S.Y. Wang is an Associate Professor of the Department of Computer Science and Information Engineering at National Chiao Tung University, Taiwan. He received his Master and Ph.D. degree in computer science from Harvard University in 1997 and 1999, respectively. His research interests include wireless networks, Internet technologies, network simulations, and operating systems. He is the author of the NCTUns 2.0 network simulator and emulator, which is being widely used by network and communication researchers. More information about the tool is available at http://NSL.csie.nctu.edu.tw/nctuns.html. C.H. Hwang received his master degree in computer science from NCTU in 2002 and currently is working for a network company. C.L. Chou currently is a third-year Ph.D. student at the Department of Computer Science and Information Engineering, National Chiao TungUniversity (NCTU), Taiwan. He received his master degree in computer science from NCTU in 2002.     

Adaptive median filters: new algorithms and results

Based on two types of image models corrupted by impulse noise, we propose two new algorithms for adaptive median filters. They have variable window size for removal of impulses while preserving sharpness. The first one, called the ranked-order based adaptive median filter (RAMF), is based on a test for the presence of impulses in the center pixel itself followed by a test for the presence of residual impulses in the median filter output. The second one, called the impulse size based adaptive median filter (SAMF), is based on the detection of the size of the impulse noise. It is shown that the RAMF is superior to the nonlinear mean L(p) filter in removing positive and negative impulses while simultaneously preserving sharpness; the SAMF is superior to Lin's (1988) adaptive scheme because it is simpler with better performance in removing the high density impulsive noise as well as nonimpulsive noise and in preserving the fine details. Simulations on standard images confirm that these algorithms are superior to standard median filters.     

Conference key distribution schemes for secure digital mobilecommunications

We propose a new service for digital mobile communication systems. The service enables two or more users to hold a secure conference. Two requirements must be considered: privacy and authentication. Privacy involves ensuring that an eavesdropper cannot intercept the conversations of the parties holding the conference. Authentication involves ensuring that service is not obtained fraudulently in order to avoid usage charges. We present two new conference key distribution schemes for digital mobile communication systems. In these schemes, a group of users can generate a common secret keg over a public channel so that they may hold a secure conference