Atomic force microscopy of the morphology and mechanical behaviour of barnacle cyprid footprint proteins at the nanoscale

Barnacles are a major biofouler of man-made underwater structures. Prior to settlement, cypris larvae explore surfaces by reversible attachment effected by a ‘temporary adhesive’. During this exploratory behaviour, cyprids deposit proteinaceous ‘footprints’ of a putatively adhesive material. In this study, footprints deposited by Balanus amphitrite cyprids were probed by atomic force microscopy (AFM) in artificial sea water (ASW) on silane-modified glass surfaces. AFM images obtained in air yielded better resolution than in ASW and revealed the fibrillar nature of the secretion, suggesting that the deposits were composed of single proteinaceous nanofibrils, or bundles of fibrils. The force curves generated in pull-off force experiments in sea water consisted of regions of gradually increasing force, separated by sharp drops in extension force manifesting a characteristic saw-tooth appearance. Following the relaxation of fibrils stretched to high strains, force–distance curves in reverse stretching experiments could be described by the entropic elasticity model of a polymer chain. When subjected to relaxation exceeding 500 ms, extended footprint proteins refolded, and again showed saw-tooth unfolding peaks in subsequent force cycles. Observed rupture and hysteresis behaviour were explained by the ‘sacrificial bond’ model. Longer durations of relaxation (>5 s) allowed more sacrificial bond reformation and contributed to enhanced energy dissipation (higher toughness). The persistence length for the protein chains (L_P) was obtained. At high elongation, following repeated stretching up to increasing upper strain limits, footprint proteins detached at total stretched length of 10 µm.     

An extended graphical targeting technique for direct reuse/recycle in concentration and property-based resource conservation networks

Minimum flowrate targeting methods for resource conservation networks (RCNs) have been developed over the last decades. The existing methodologies still have certain drawbacks. Their design insights could be deepened and some steps should be more convenient for the users. A targeting tool called the material surplus composite curve (MSCC), which is an improvement of the surplus diagram for water and hydrogen networks is introduced. The approach is illustrated on several cases selected from the literature. Using this technique, it is possible to determine rigorous flowrate targets for different variants of the RCN problem.     

Hygroscopicity of water-soluble organic compounds in atmospheric aerosols: amino acids and biomass burning derived organic species

Amino acids and organic species derived from biomass burning can potentially affect the hygroscopicity and cloud condensation activities of aerosols. The hygroscopicity of seven amino acids (glycine, alanine, serine, glutamine, threonine, arginine, and asparagine) and three organic species most commonly detected in biomass burning aerosols (levoglucosan, mannosan, and galactosan) were measured using an electrodynamic balance. Crystallization was observed in the glycine, alanine, serine, glutamine, and threonine particles upon evaporation of water, while no phase transition was observed in the arginine and asparagine particles even at 5% relative humidity (RH). Water activity data from these aqueous amino acid particles, except arginine and asparagine, was used to revise the interaction parameters in UNIQUAC functional group activity coefficients to give predictions to within 15% of the measurements. Levoglucosan, mannosan, and galactosan particles did not crystallize nor did they deliquesce. They existed as highly concentrated liquid droplets at low RH, suggesting that biomass burning aerosols retain water at low RH. In addition, these particles follow a very similar pattern in hygroscopic growth. A generalized growth law (Gf = (1 - RH/100)-0.095) is proposed for levoglucosan, mannosan, and galactosan particles.     

Computer simulation of energy use,greenhouse gas emissions,and costs for alternative methods of processing fluid milk

Computer simulation is a useful tool for benchmarking electrical and fuel energy consumption and water use in a fluid milk plant. In this study, a computer simulation model of the fluid milk process based on high temperature, short time (HTST) pasteurization was extended to include models for processes for shelf-stable milk and extended shelf-life milk that may help prevent the loss or waste of milk that leads to increases in the greenhouse gas (GHG) emissions for fluid milk. The models were for UHT processing, crossflow microfiltration (MF) without HTST pasteurization, crossflow MF followed by HTST pasteurization (MF/HTST), crossflow MF/HTST with partial homogenization, and pulsed electric field (PEF) processing, and were incorporated into the existing model for the fluid milk process. Simulation trials were conducted assuming a production rate for the plants of 113.6 million liters of milk per year to produce only whole milk (3.25%) and 40% cream. Results showed that GHG emissions in the form of process-related CO₂ emissions, defined as CO₂ equivalents (e)/kg of raw milk processed (RMP), and specific energy consumptions (SEC) for electricity and natural gas use for the HTST process alone were 37.6 g of CO₂e/kg of RMP, 0.14 MJ/kg of RMP, and 0.13 MJ/kg of RMP, respectively. Emissions of CO₂ and SEC for electricity and natural gas use were highest for the PEF process, with values of 99.1 g of CO₂e/kg of RMP, 0.44 MJ/kg of RMP, and 0.10 MJ/kg of RMP, respectively, and lowest for the UHT process at 31.4 g of CO₂e/kg of RMP, 0.10 MJ/kg of RMP, and 0.17 MJ/kg of RMP. Estimated unit production costs associated with the various processes were lowest for the HTST process and MF/HTST with partial homogenization at $0.507/L and highest for the UHT process at $0.60/L. The increase in shelf life associated with the UHT and MF processes may eliminate some of the supply chain product and consumer losses and waste of milk and compensate for the small increases in GHG emissions or total SEC noted for these processes compared with HTST pasteurization alone. The water use calculated for the HTST and PEF processes were both 0.245 kg of water/kg of RMP. The highest water use was associated with the MF/HTST process, which required 0.333 kg of water/kg of RMP, with the additional water required for membrane cleaning. The simulation model is a benchmarking framework for current plant operations and a tool for evaluating the costs of process upgrades and new technologies that improve energy efficiency and water savings.     

Cyclic voltammetric analysis of antioxidant activity in cane sugars and palm sugars from Southeast Asia

Fourteen commonly available types of cane and palm sugar were analysed for antioxidant activity using cyclic voltammetry. Five of the sugars, dissolved in phosphate buffer, showed anodic current peaks which were indicative of antioxidant activity. The rank order of these sugars was: gula anau > gula merah > China rock honey sugar > soft brown sugar > raw sugar. Gula anau is an unrefined palm sugar, while the other four are from sugarcane. Soft brown sugar and raw sugar are coated brown sugars. The China rock honey sugar contained chrysanthemum flowers, and its antioxidant properties appear to be due to these flowers and not to the sugar per se. Pure white sugar, other rock sugars and rock honey sugars (all refined from cane) as well as gula Melaka, an unrefined rock sugar from palm trees, had no observable antioxidant activity. It is concluded that, from a nutritional point of view, using gula anau as a sweetener or ingredient in foods or drinks has an added benefit owing to its antioxidant content.     

Nutritional constituents and antioxidant properties of indigenous kembayau (Dacryodes rostrata (Blume) H. J. Lam) fruits

The nutritional and antioxidant properties of peels, pulp and seeds of kembayau (Dacryodes rostrata) fruits were evaluated. Kembayau seeds and pulp were rich in fat, while peels had the highest ash contents. Potassium was the most prevalent mineral in peels (380.72-1112.00 mg/100 g). In kembayau fruits, total flavonoid content (1012.74-28,022.28 mg rutin equivalent/100 g) was higher than total phenolic and total monomeric anthocyanin contents. Kembayau seeds exhibited high flavonoid and phenolic contents compared to the contents in peels and pulp. Antioxidant capacities were also higher in seeds as typified by trolox equivalent antioxidant capacity assay (51.39-74.59 mmol TE/100 g), ferric reducing antioxidant power assay (530.05-556.98 mmol Fe²⁺/100 g) and by 1,1-diphenyl-2-picryl hydrazyl radical scavenging activity (92.18-92.19%) when compared to peels and pulp. Pulp and peels of kembayau fruit may be an important source of energy and minerals for human consumption, while seeds have a good potential as antioxidants.     

Resistant Starch Content and Structural Changes in Maize (Zea mays) Tortillas During Storage

Storage of maize products such as tortillas may cause starch retrogradation and lead to resistant starch (RS) formation. This study was carried out to determine if storage of maize tortillas under refrigerated conditions enhanced RS content and/or modified RS structure. Improved Costeño variety maize grain was nixtamalized and processed into tortillas which were stored for five and ten days at 5°C. Total resistant starch (TRS) and retrograded resistant starch (RRS or RS3) contents were determined on raw and nixtamalized maize grain and tortillas stored for zero, five and ten days. Differential scanning calorimetry (DSC), X‐ray diffraction (XRD) and near‐infrared (NIR) spectroscopy were use to evaluate structural changes in retrograded resistant starch isolated from each sample type. Total starch content was 67 ± 1.5% for all samples, TRS ranged from 3.3% in the raw grain at 7.2% in tortillas stored for ten days, while RRS starch content ranged from 0% in the raw grain to 3.2% in tortillas stored for ten days. DSC showed endothermic transitions corresponding to amylopectin and amylose retrogradation, at 31.9 and 139.7°C in RRS from tortillas stored for five days, and at 47.9 and 146°C in RRS from tortillas stored for ten days. These values agreed with the higher total RS content recorded after prolonged storage. XRD revealed a starch crystallinity of 13.7% in tortillas stored for five days and 15.3% in those stored for ten days. NIR spectroscopy analysis showed evidence of structural changes in polymeric order that were more pronounced in RRS of tortillas stored for ten days, due to increase in crystalline region.