瑞典Laholm沼气厂的运行实践

瑞典沼气的总产量约为1400GW·h,约有60%产自200多家市政污水处理厂的污泥消化池,垃圾填埋场的产量占30%,剩余的10%主要来源于工业废水处理厂和混合消化厂。一般情况下,沼气用作热源和发电,也可以作为汽车燃料。有机废物转化成沼气的同时还产生了消化残余物,可用作生物肥料。在瑞典有机废物填埋要课以重税,并且自2005年开始该国已严禁有机物的填埋处理,所以人们逐渐开始了对有机物混合消化的重视和研究。目前瑞典约有10家沼气厂利用厌氧消化处理收集来的各种有机废料,总处理能力>20×104t/a。多数沼气厂将牲畜粪便作为主要原料,再辅以其他…     

套管液压式φ106mm密封加固系统研究

针对套管液压式φ100mm密封加固系统在实际应用中的缺点,开展了大通径密封加固技术专题研究.研制的套管液压式φ106mm密封加固器承压达30 MPa以上,悬挂力达到500kN以上,可下入φ100mm小直径分层管柱.现场应用见到了明显的效果,为提高小直径分采分注管柱寿命创造了条件.     

Diffusion Behaviour of Fe-Cu Interface of Copper Brazed Double-wall Steel Tubes

By means of electron probe(EPMA),scanning electron microscope(SEM),and optical microscope(QM),the diffusion behaviour on the Fe-Cu interface of copper brazed double-wall steel tubes andthe microstructure of the diffusion layer have been investigated.There are three kinds of metallurgicalbonds between copper plating layer and steel substrate: (1)the Cu diffusing into steel substratealong grain boundary of ferrite;(2)the Cu diffusion into grain bulk of ferrite: (3)the Fe diffusing intoCu layer.The copper brazed double-wall steel tubes are formed by the combination of the diffusionsmentioned above and this is the reason for excellent mechanical and technological properties of thecopper brazed double-wall steel tubes.     

A COMPUTER-AIDED UNIFIED APPROACH TO MODELING PWM AND RESONANT CONVERTERS

This letter puts forward a method of modeling for the steady-state and small signal dynamic analysis on PWM, quasi-resonant and series/（parallel） resonant switching converters based on pulse-waveform integral approach. As an example, PWM and quasi-resonant converters are used to discuss the principle of the approach. The results are compared with those in the relative literatures. Computer aided analysis are made to confirm the correctness.     

An efficient approach for calculating the dispersions of photonic-crystal fibers: design of the nearly zero ultra-flattened dispersion

A novel and efficient approach is proposed to calculate the dispersions of the guided modes of the photonic-crystal fibers (PCFs). Based on the vector boundary-element method (VBEM), the surface integral equations for the first and second derivatives of the propagation constants with respect to the wavelength are explicitly derived. Compared with the three-point finite-difference approach, which needs to solve and search three effective indexes near the interested wavelength, this approach can determine the dispersions of the PCFs by only solving one effective index at this wavelength based on the derived formulations. This novel approach saves over 60% computing time without losing the accuracy. Based on this approach, a novel four-ring PCF is designed by optimizing only three geometrical parameters to achieve the nearly zero ultra-flattened dispersion property. Compared with previously presented dispersion-flattened PCFs, the design procedure for the four-ring structure could be more efficient and easier because relatively lesser parameters need to be optimized.     

60Co辐照预处理对苹果片脱水特性和品质的影响

进行了不同辐照剂量、热风温度、切片厚度对苹果脱水速率及品质的影响试验,结果表明该三因子影响苹果片的脱水速率和外观质量.辐照剂量增加,热风温度增高,脱水速率高,VC含量和复水比下降.辐照剂量、热风温度、切片厚度三因素对脱水速率和干制品的外观质量、VC含量、复水比等四指标大都呈显著影响.     

Improving Thermal Stability of BaMgAl10O17:Eu Phosphor

Heterogeneous precipitation method was used to prepared surface coating on self-made BaMgAl10O17:Eu phosphor. Results illustrate that the coating film can be silicon dioxide in amorphous state with 50 nm in thickness. Photoluminescence results indicate that the coating layer presents an observable improved effect on the enhancement of thermal stability. When baked at 600 ℃ for 1 h, the luminance of coated BAM keeps at 92% higher than that of uncoated BAM by 23%. This protective effect can be attributed to the high compact degree and uniformity of this amorphous SiO2 coating film which is served as a diffusion block layer to inbreak oxygen atom, thus releases the oxidation extent of Eu2 effectively.     

A Study of AlN Films Prepared by Arc Ion Plating

Hexagonal AlN films have been obtained by arc ion plating at different negative biases ,X-ray diffraction and scanning electron microscopy results show that AlN films with smooth surfaces and (002) preferred orientation are obtained at low biases ,whereas those with coarse surfaces and (100) preferred orientation are obtained at high biases,The formation mechanism of AlN is analyzed and the experiment results are discussed,The effect of bias on adhesion strength has also been examined.     

PetaStar: a petabit photonic packet switch

This paper presents a new petabit photonic packet switch architecture, called PetaStar. Using a new multidimensional photonic multiplexing scheme that includes space, time, wavelength, and subcarrier domains, PetaStar is based on a three-stage Clos-network photonic switch fabric to provide scalable large-dimension switch interconnections with nanosecond reconfiguration speed. Packet buffering is implemented electronically at the input and output port controllers, allowing the central photonic switch fabric to transport high-speed optical signals without electrical-to-optical conversion. Optical time-division multiplexing technology further scales port speed beyond electronic speed up to 160 Gb/s to minimize the fiber connections. To solve output port contention and internal blocking in the three-stage Clos-network switch, we present a new matching scheme, called c-MAC, a concurrent matching algorithm for Clos-network switches. It is highly distributed such that the input-output matching and routing-path finding are concurrently performed by scheduling modules. One feasible architecture for the c-MAC scheme, where a crosspoint switch is used to provide the interconnections between the arbitration modules, is also proposed. With the c-MAC scheme, and an internal speedup of 1.5, PetaStar with a switch size of 6400 /spl times/ 6400 and total capacity of 1.024 petabit/s can be achieved at a throughput close to 100% under various traffic conditions.     

辐射肉品的特性及其质量控制研究

主要阐述了辐射技术对肉品微生物和肉品品质的影响,提出了对辐射肉品进行质量控制的措施,并对几种常用的肉品质量检测方法进行了阐述。