碱土金属在萃取剂与树脂间反应平衡常数的测定

研究了碱土金属离子在Ｄ００１树脂与８－羟基喹啉三氯甲烷溶液间的平衡常数Ｏ－ｔＫ的测定。其值依Ｍｇ、Ｃａ、Ｓｒ、Ｂａ次序减小。并得出萃取剂浓度［ＨＡ］。与金属离子在两相分配的关系。     

PVA-based activated carbon fibers with lotus root-like axially porous structure

A novel method was developed for the fabrication of activated carbon fiber (ACF) with wet spinning polyvinyl alcohol (PVA) fibers as the precursors. Through a combination of preoxidation, dehydration, carbonization and activation under a certain tension, PVA-based ACFs (PVA-ACFs) with high yields and good mechanical properties were obtained. The surface and cross-section morphologies, pore structures, surface geometries, surface functional groups and crystal structures of the PVA-ACFs were characterized using field emission scanning electron microscopy, low temperature nitrogen adsorption, Fourier transformed infrared spectrophotometry, X-ray photoelectron spectroscopy and X-ray power diffraction. All the PVA-ACF samples prepared had lotus root-like axially meso- and macroporous structures with the domination of micropores. Fractal geometries of PVA-ACFs deduced from nitrogen adsorption isotherms indicates that capillary force dominated in the interactions between nitrogen and the PVA-ACFs. The surface functional groups of the PVA-ACFs depend on the activating agents. Graphitoidal crystal structures were observed for the PVA-ACFs. The small crystal size and short range ordering between the crystallites ensured a high specific surface area of the PVA-ACFs.     

Effect of Product Conductivity on Field-Activated Combustion Synthesis

Experimental and modeling results on the field-activated combustion synthesis (FACS) of Nb₅Si₃ are reported. In the absence of an electric field and without reactant preheating, Nb₅Si₃ cannot be prepared by self-propagating high-temperature synthesis (SHS). Under the influence of a field a self-sustaining combustion wave is established whose rate of propagation decreases with traveled distance. For relatively low field values, the wave propagation mode changes from a continuous (smooth) to a spin mode. The product of synthesis depends on the mode of propagation. Synthesis during continuous wave propagation results in the formation of Nb₅Si₃, primarily in the α-modification. In contrast, when the wave propagates in a spin mode, the product is NbSi₂ with unreacted niobium. The present observations demonstrate a case where the field effect is not localized, as was the case in previous studies. The difference in behavior is attributed to differences in the electrical conductivities of the product phases.     

Cu2O/Cu Cermet as a Candidate Inert Anode for Al Production

Cu₂O/ x Cu ( x =0–25 wt%) cermets were evaluated as a novel partially inert anode for aluminum (Al) production. The physical and mechanical properties, including the compressive strength, flexural strength, thermal expansion coefficient, thermal conductivity, and dc electrical conductivity were tested at room temperature and at temperatures up to 950°C. The coefficient of thermal expansion, compressive strength, flexural strength, thermal conductivity, and electrical conductivity of Cu₂O/Cu cermets increased with increasing Cu content. High-temperature electrical conductivity measurements showed that with increasing temperature, the electrical conductivity increased when the Cu content was below the percolation threshold, while it decreased when the Cu content was above the percolation threshold. A relatively stable CuAlO₂ layer formed on the cermet surface during electrochemical testing, and the corrosion rate of this anode was estimated to be about 1.8–1.9 cm/year in Al production.     

Point-based online value iteration algorithm in large POMDP

Partially observable Markov decision process (POMDP) is an ideal framework for sequential decision-making under uncertainty in stochastic domains. However, it is notoriously computationally intractable to solving POMDP in real-time system. In order to address this problem, this paper proposes a point-based online value iteration (PBOVI) algorithm which involves performing value backup at specific reachable belief points, rather than over the entire belief simplex, to speed up computation processes, exploits branch-and-bound pruning approach to prune the AND/OR tree of belief states online, and proposes a novel idea to reuse the belief states that have been searched to avoid repeated computation. The experiment and simulation results show that the proposed algorithm can simultaneously satisfy the requirement of low errors and high timeliness in real-time system.     

Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries

Based on the voltammetric behaviour of a series of methyl-substituted benzenes in 1M LiPF₆/EC-DMC electrolyte, xylene was selected and tested as an electrolyte additive for overcharge protection of Li-ion batteries. From the overcharge curves, CV behaviour and SEM observations of the cells in the presence of xylene, it was found that the additive can polymerize at the overcharged voltage to form a dense layer of isolating polymer film at the cathode surface, which blocks off further oxidation of the electroactive material and electrolyte and, therefore, improves the overcharge tolerance of the Li-ion battery. In addition, the xylene additive has shown only a slight influence on the cycling behaviour.     

熔融石英陶瓷的性能及其应用

介绍了石英陶瓷的性能特点、制备过程及应用领域     

露天开采下盘无台阶采矿法

新桥硫矿首次在国内推行露天开采下盘无台阶采矿新工艺,该工艺具有剥岩少、基建快、出矿早、采矿工程延深快等特点。由于该工艺具有独特的靠帮方式和端部过渡方式,需严格控制底盘因爆破而导致的岩体滑动。该工艺的实施已取得了显著的经济效益。     

流动床离子交换工艺在己二酸催化剂回收中的应用

介绍流动床离子交换装置回收催化剂的生产工艺，从交换装置的选择到运行，分析了流动床的优点、影响因素以及生产中应注意的问题和要求。     

Vinyl‐containing silicone resin as the crosslinking agent of heat‐curable silicone rubber

Heat‐curable silicone rubber (HCSR) was prepared by using vinyl‐containing silicone resin (VSR) as the crosslinking agent instead of polyvinylsilicone oil (C gum). Mechanical properties and crosslink density of the vulcanizates were measured. The results indicate that VSR is a good crosslinking agent for HCSR. The tensile strength, tearing strength, elongation at break, and hardness of the vulcanizate can reach 10.2 MPa, 29.1 kN/m, 720%, and 58 SHA, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3123–3127, 2002; DOI 10.1002/app.10054