2,2-二(3-氨基-4-羟基)苯基丙烷的合成与结构表征

分别在Pd/C、FeOOH和FeCl3·6H2O/C三种不同催化剂存在下,由水合肼还原2,2 二(4 羟基 3 硝基)苯基丙烷(1)合成了2,2 二(3 氨基 4 羟基)苯基丙烷,筛选出成本低、收率高的理想催化剂为FeCl3·6H2O/C。当物料配比n(水合肼):n(1)=5:1,反应起始温度为70℃,反应时间为80min时,收率为93 0%。产物经重结晶纯化后,由元素分析、红外光谱、核磁共振谱和质谱对其结构进行了表征,确证了产物的结构。     

基于ARM的便携式电机参数实时监测仪设计

针对三相电机参数监测问题,基于AT91SAM9261微处理器和嵌入式实时操作系统VxWorks,设计了一套便携式电机参数监测仪。监测仪以ATT7022B电能测量芯片和鉴相计数单元为核心,对三相电机的工作电压、电流及电机的转速转向参数进行实时监测与故障报警,并能在联网模式下通过以太网与上层监控主机通信,实现远程参数监测和多电机联网测量,保证系统安全的同时方便了伺服系统调试。     

膨胀阻燃聚丙烯复合体系的研究

采用聚磷酸铵（APP）和Deflam（敌火龙）分别对聚丙烯（PP）进行了填充改性，研究了两者对PP力学性能、阻燃性能、结晶性能的影响。结果表明：在PP中分别加入APP和Deflam，都可改善PP的阻燃性能，并且添加后者比添加前者对PP的阻燃效果要好。在阻燃性能改善的同时，复合体系的弯曲模量和弹性模量明显提高，但拉伸强度和冲击强度降低。APP和Deflam在PP中都具有成核剂作用，可使PP的结晶过程在较高温度下进行，但Deflam对PP的成核效果不如APP。     

国内二氯苯生产现状及今后发展之我见

介绍了国内二氯苯3种不同生产式敢，规模及对二氯苯，邻二氯苯的精帛工艺，并分析了国内二氯苯生产装置中存在的问题，详细分析了对二氯苯，邻二氯苯的市场及应用情况，针对国内二氯苯的生产现状及与国外的差距提出了今后发展的建议。     

利用氯碱厂废弃盐泥制备NO3-吸附剂

将氯碱厂废弃盐泥与丙烯酸、钛酸四正丁酯等共聚，过硫酸钾作引发剂，制得TNO3^-吸附剂，同时还得到了有利用价值的二氧化硅和碳酸钙。用正交试验法与单纯形优化法相结合，确定了废弃盐泥制备NO3^-吸附剂的优良配方及合适的工艺。增添了水净化剂的新品种，探索了氯碱工业废弃盐泥利用的新途径。     

Ceramic Composites with Three-Dimensional Architectures Designed to Produce a Threshold Strength—II. Mechanical Observations

Finite element modeling and linear elastic fracture mechanics are used to model the residual stresses and failure stress of ceramic composites consisting of polyhedral alumina cores surrounded by thin alumina/mullite layers in residual compression. This type of composite architecture is expected to exhibit isotropic threshold strength behavior, in which the strength of the composite for a particular assumed flaw will be constant and independent of the orientation of tensile loading. The results of the modeling indicate that the strengths of such architectures will be higher than those of laminates of similar architectural dimensions that were previously found to exhibit threshold strength behavior for a particular flaw type. Flexural testing of the polyhedral architectures reveals that failure is dominated by processing defects found at junctions between the polyhedra. Fractography revealed the interaction of these defects with the residual stresses in the compressive layers that separate the polyhedra.     

Properties and crystallization kinetics of poly(ether ether ketone)‐co‐poly(ether ether ketone ketone) block copolymers

A series of block copolymers composed of poly(ether ether ketone) (PEEK) and poly(ether ether ketone ketone) (PEEKK) components were prepared from their corresponding oligomers via a nucleophlilic aromatic substitution reaction. Various properties of the copolymers were investigated with differential scanning calorimetry (DSC) and a tensile testing machine. The results show that the copolymers exhibited no phase separation and that the relationship between the glass‐transition temperature (T_g) and the compositions of the copolymers approximately followed the formula T_g = T_g1X₁ + T_g2X₂, where T_g1 and T_g2 are the glass‐transition‐temperature values of PEEK and PEEKK, respectively, and X₁ and X₂ are the corresponding molar fractions of the PEEK and PEEKK segments in the copolymers, respectively. These copolymers showed good tensile properties. The crystallization kinetics of the copolymers were studied. The Avrami equation was used to describe the isothermal crystallization process. The nonisothermal crystallization was described by modified Avrami analysis by Jeziorny and by a combination of the Avrami and Ozawa equations. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1652–1658, 2005     

Calibration for measured crystal size distribution

The crystal size distribution (CSD) measured by laser diffraction technique is obtained by assuming spherical crystals. If crystals are non-spheres, calibration is responsible for the true crystal size, particle number concentration and population density. In this paper, CSD calibration equations have been deduced. It was shown that when shape factors are size-independent, the weight percent of particles is not affected by crystal shape and calibration is just a horizontal shift of measured CSD. Calibration was taken for plate-like crystals of cefazolin sodium and rod-like crystals of l-threonine. The effect of CSD calibration on crystal growth kinetics has been investigated in l-threonine-water evaporation crystallization system.     

两级定位-路径问题的变邻域人工蜂群算法

建立了两级定位-路径问题的数学模型,提出了一种求解该问题的人工蜂群算法。针对该算法容易出现早熟现象,将近年来国外出现的一种新颖的轨迹式启发式算法--变邻域搜索融入其中,由此提出三种变邻域搜索策略。基于不同变邻域搜索策略的人工蜂群算法和人工鱼群算法的求解效果进行对比仿真。实验结果表明,变邻域人工蜂群算法能有效求解两级定位-路径问题。     

炭黑对轮胎胎面胶热物性的影响

研究了炭黑品种和用量对轮胎胎面胶热扩散系数(α)、导热系数(λ)及比热容(C)3种热物性参数的影响规律。结果表明,随着炭黑填充量的增加,胎面胶的α及λ均逐渐增大,C逐渐减小。炭黑的结构性对胎面胶α的影响程度大于炭黑的粒径;温度相同时,炭黑的结构性越高,其填充胎面胶的α越大;随着炭黑填充量的增加,3种炭黑填充胎面胶α之间的差距呈现先增大后减小的变化趋势。炭黑的结构性及粒径对胎面胶C的影响没有固定的规律,但在低温区,炭黑的粒径越大,其填充胎面胶的C越大,且炭黑填充量对此差距无影响。炭黑的结构性对胎面胶λ的影响程度大于炭黑的粒径;温度相同时,炭黑的结构性越高,其填充胎面胶的λ越大;当炭黑用量较低时,其对胎面胶λ的影响程度相对较小,随着炭黑填充量的增加,3种炭黑填充胎面胶λ之间的差距呈现先增大后减小的变化趋势。