Shear-induced crystallization of poly(phenylene sulfide)

The crystalline morphology of poly(phenylene sulfide) (PPS) isothermally crystallized from the melt under shear has been observed by polarized optical microscope (POM) equipped with a CSS450 hot-stage. The shish–kebab-like fibrillar crystal structure is formed at a higher shear rate or for a longer shear time, which is ascribed to the tight aggregation of numerous oriented nuclei in the direction of shear. The crystallization induction time of PPS decreases with the shear time, indicating that the shear accelerates the formation of stable crystal nuclei. Under shear, the increase of spherulite growth rate results from highly oriented chains. The melting behavior of shear-induced crystallized PPS performed by differential scanning calorimetry (DSC) shows multiple melting peaks. The lower melting peak corresponds to melting of imperfect crystal, and the degree of crystal perfection decreases as the shear rate increases. The higher melting peak is related to the orientation of molecular chains. These oriented molecular chains form the orientation nuclei which have higher thermal stability than the kebab-like lamellae that are developed later. A new model based on the above observation has been proposed to explain the mechanism of shish–kebab-like fibrillar crystal formation under shear flow.     

Non-invasive headspace measurement for characterizing oxygen-scavenging in polymers

A non-invasive headspace analysis method to measure rate and amount of oxygen uptake in oxygen-scavenging polymers is presented. Oxygen uptake data for metal-catalyzed poly(1,4-butadiene) at 30 °C are provided to illustrate the method. These data were obtained by measuring oxygen headspace concentration above the scavenging polymer with an OxySense^® 200T non-invasive oxygen sensor, and, for comparison, oxygen uptake was measured with an analytical balance. Excellent agreement was observed between these two independent experiments.     

Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion

The electrochemical promotion of catalysis (EPOC) of propene combustion was investigated using Pt sputtered thin film on an O²⁻ conductor, 8 mol% Y₂O₃-stabilized-ZrO₂ (YSZ). In order to separate the influence of the thermal migration of the O²⁻ oxide ions from the electrolyte to the catalyst surface and the impact of an electrical polarization on the catalytic activity, several light-off experiments (cool down and heat up procedures) were successively performed under different polarizations, i.e. OCV, +2 and −2 V. These experiments have clearly shown that the presence of O²⁻ (thermally or electrochemically induced) inhibits the catalytic activity of the platinum for the propene deep oxidation. These results demonstrate the importance to define a normalized rate enhancement ratio, ρ _n , from a reference value of the catalytic rate corresponding to a Pt surface state free of O²⁻ ions.     

A strategy for the electro-organic synthesis of new hydrocaffeic acid derivatives

Electrochemical treatment processes can significantly contribute to the protection of the environment through the minimization of waste and toxic materials in effluents. From a pharmaceutical point of view and due to the existing resemblance between the electrochemical and biological reactions, it can be assumed that the oxidation mechanisms on the electrode and in the body share similar principles. In this paper, the application of electrochemical studies in the design of an environmentally friendly method was delineated for the new hydrocaffeic acid (HCA, 3,4-dihydroxy hydrocinnamic acid) derivatives synthesis at carbon electrodes in an undivided cell. In this cell, the EC mechanism reaction was involved, comprising two steps alternatively; (1) electrochemical oxidation and (2) chemical reaction. In particular, the electro-organic reactions of HCA, an important biological molecule, were studied in a water–acetonitrile (90:10 v/v) mixture in the presence of benzenesulfinic acid (3) and p-toluenesulfinic acid (4). The research included the use of a variety of experimental techniques, such as cyclic voltammetry, controlled-potential electrolysis and product spectroscopic identification.     

NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells

A direct ethanol fuel cell (DEFC), which is less prone to ethanol crossover, is reported. The cell consists of PtRu/C catalyst as the anode, Nafion^® 117 membrane, and Ni–Co–Fe (NCF) composite catalyst as the cathode. The NCF catalyst was synthesized by mixing Ni, Co, and Fe complexes into a polymer matrix (melamine-formaldehyde resins), followed by heating the mixture at 800 °C under inert atmosphere. TEM and EDX experiments suggest that the NCF catalyst has alloy structures of Ni, Co and Fe. The catalytic activity of the NCF catalyst for the oxygen reduction reaction (ORR) was compared with that of commercially available Pt/C (CAP) catalyst at different ethanol concentrations. The decrease in open circuit voltage (V_oc) of the DEFC equipped with the NCF catalysts was less than that of CAP catalyst at higher ethanol concentrations. The NCF catalyst was less prone to ethanol oxidation at cathode even when ethanol crossover occurred through the Nafion^®117 film, which prevents voltage drop at the cathode. However, the CAP catalyst did oxidize ethanol at the cathode and caused a decrease in voltage at higher ethanol concentrations.     

伊通河流域上游"8·13"特大暴雨洪水分析

本文通过对伊通河流域"8.13"特大暴雨洪水的分析,研究探讨了突发性暴雨洪水的产汇流特点和规律,对今后做好中小流域的突发性暴雨洪水预报和抗洪减灾工作具有重要意义。     

Numerical Study of Scale Effects of Ultra-Thin Nickel Beams

Recent experiments have shown that metallic materials display significant size effects when the characteristic length scale of non-uniform plastic deformation is close to a micron. Couple stress plasticity has been developed to explain such phenomena by Fleck and Hutchinson. The mechanical behaviors of ultra-thin nickel beams in different boundary conditions were studied with the hybrid element developed for couple stress plasticity before. Strong scale effects are found when the beam's thickness is close to the material characteristic length scale. Such phenomena will disappear if the beam' s thickness is greatly larger than the material characteristic length scale. The scale effect is the beams inherent property and it does not change with the change of support conditions.     

Grain size dependence of the activation parameters for plastic deformation: Influence of crystal structure,slip system,and rate-controlling dislocation mechanism

A critical review of available results on the dependence of grain size on the activation parameters for deformation, specifically, the activation volume, V*, and the thermal component of flow stress, σ*, has been carried out with a view to verifying the Armstrong prediction that identifies the Hall-Petch (H-P) intercept with the easy slip system and the H-P slope with the most difficult system in polycrystals. The influence of slip system choice is demonstrated using results on Cd and Zr. The Armstrong prediction is valid for basal slip hcp metals, such as Cd and Zn, with V* and σ* determined by the difficult pyramidal slip. For the prism slip metals such as Zr and Ti, V* and σ* are controlled by interstitial solutes and are independent of grain size. The results on Zr are used to highlight the influence of dynamic strain aging on the H-P parameters. In bcc metals, in which the Peierls-Nabarro barrier is the rate-controlling obstacle, V* and σ* are again independent of grain size. For fcc metals, correlation of the H-P slope with the cross-slip stress, predicted by the Armstrong model, has been demonstrated for a few cases. The variation of V* with grain size in Ni as reported by Narutani and Takamura (Acta Metall. Mater., 1991, vol. 227, pp. 2037–49) is newly interpreted in terms of the Armstrong model that associates the H-P intercept in fcc metals with dislocation intersections and the H-P slope with cross-slip, and provides realistic results for the activation volumes for the two processes. This article is based on a presentation given in the symposium “Dynamic Deformation: Constitutive Modeling, Grain Size, and Other Effects: In Honor of Prof. Ronald W. Armstrong,” March 2–6, 2003, at the 2003 TMS/ASM Annual Meeting, San Diego, California, under the auspices of the TMS/ASM Joint Mechanical Behavior of Materials Committee.     

浅谈天然彩棉织物的质量

从生产实践出发 ,阐述了彩棉纤维物理指标对彩棉纱的性能、织物的强力、色牢度及色泽的影响。     

Low-Temperature Annealing Effect of RF Inductor With FeNi-SiO2 Granular Film

A low-temperature annealing process in vacuum is proposed to enhance the inductance of RF inductors with FeNi-SiO₂ magnetic granular films. Due to the great improvement of soft magnetic property in the 200degC and 350degC annealed film, the inductance is enhanced by 9.6% (200degC) and 8.3% (350degC), respectively, compared with the case of as-deposited film inductor. The peak value of quality factor, which is 9.18 for the as-deposited film inductor, is also increased to 9.27 (200degC ) and 12.27 (350degC), respectively.