Kinetic modelling and microbial community assessment of anaerobic biphasic fixed film bioreactor treating distillery spent wash

Anaerobic digestion, microbial community structure and kinetics were studied in a biphasic continuously fed, upflow anaerobic fixed film reactor treating high strength distillery wastewater. Treatment efficiency of the bioreactor was investigated at different hydraulic retention times (HRT) and organic loading rates (OLR 5-20 kg COD m⁻³ d⁻¹). Applying the modified Stover-Kincannon model to the reactor, the maximum removal rate constant (U_max) and saturation value constant (K_B) were found to be 2 kg m⁻³ d⁻¹ and 1.69 kg m⁻³ d⁻¹ respectively. Bacterial community structures of acidogenic and methanogenic reactors were assessed using culture-independent analyses. Sequencing of 16S rRNA genes exhibited a total of 123 distinct operational taxonomic units (OTUs) comprising 49 from acidogenic reactor and 74 (28 of eubacteria and 46 of archaea) from methanogenic reactor. The findings reveal the role of Lactobacillus sp. (Firmicutes) as dominant acid producing organisms in acidogenic reactor and Methanoculleus sp. (Euryarchaeotes) as foremost methanogens in methanogenic reactor.     

Numerical simulation of fluid flow and heat transfer in twin-screw extruders for non-Newtonian materials

A new simplified approach has been proposed for the numerical simulation of the thermal transport in corotating, tangential, and self-wiping twin-screw extruders. It is assumed that the flow domain in a twin-screw extruder can be divided into (i) the translation region (T-region), which represents a flow similar to that in a single-screw channel and (ii) the intermeshing region (I-region), which is located between the two screws. The two regions are simulated separately and then coupled for each screw section to model the overall transport in tangential and self-wiping twin-screw extruders. A finite difference method is employed for the developing flow and temperature fields in the T-region, in order to minimize the computing effort, while a finite element method is employed for determining the interchannel flow mixing and the thermal transport in the I-region. Results are obtained in terms of temperature, velocity, and pressure variations along the screw channels and mixing between the two screws.     

High speed continuous and interrupted dry turning of A390 Aluminum/Silicon Alloy using nanostructured diamond coated WC–6 wt.% cobalt tool inserts by MPCVD

Nanostructured diamond films were grown to a thickness of approximately 35 µm by a 30 kW, 915 MHz, microwave plasma-assisted chemical vapor deposition (MPCVD) on chemically treated WC–6 wt.% Co tool inserts. Rockwell indentation tests were performed to evaluate the adhesion of the films and compared to that of traditional microcrystalline diamond. A series of high speed dry turning tests on high-silicon (18 wt.% Si) aluminum alloy A390 under continuous and interrupted modes were performed and comparisons were carried out to investigate the wear behavior on tool inserts that were uncoated, coated with nanostructured diamond, and commercial PCD (polycrystalline diamond cutter) ones. The tests showed that nanostructured diamond coatings demonstrated excellent durability against the highly abrasive A390 aluminum–silicon alloys in high speed dry turning. Ultra fine grain structure of this coating produces workpiece surface finish comparable or even better than PCD tools in the range we studied. Excellent coating adhesion of nanostructured diamond on WC–6% Co substrates leads to reliable wear behavior. For the first time, we evaluated the performance of nanostructured diamond film coated insert under high speed interrupted turning mode. A “self-cleaning” mechanism was observed which can significantly improve the performance of nanostructured diamond films. Micro-Raman spectra were taken on tested tools to study the wear mechanism of the coating.     

FILM CONDENSATION ON A HORIZONTAL ISOTHERMAL SURFACE

This paper concerns an analytical study of laminar film condensation on horizontal isothermal surfaces. The flow that arises on a surface of finite length is studied to determine the temperature field and the local heat transfer to the surface. The study considers both transient and steady laminar flow. The governing nonlinear equations are also considered for the circumstance when the surface tension effects are included. The profiles in the condensate film, for steady laminar flow, are found to be strongly dependent on the edge conditions and on the length of the horizontal condensing surface. The dependence on vapor properties and on the surface temperature is also determined. The surface tension effects are found to be negligible, even for quite small values of the Bond number, for a surface terminated by a round fall. The results for transient, laminar, flow show that the transient effects are large for highly viscous condensing fluids and for low gravity fields. An expression for the local Nusselt number is also obtained.     

Ethanol steam reforming study over ZSM-5 supported cobalt versus nickel catalyst for renewable hydrogen generation

The renewable hydrogen generation through ethanol steam reforming is one of the anticipated areas for sustainable hydrogen generation. To elucidate the role of Ni and Co with ZSM-5 support, catalysts were prepared by wet impregnation method and ethanol steam reforming(ESR) was performed. The catalysts were characterized by HR-XRD, ATR–FTIR, HR-SEM, TEM with SAED, EDAX, surface area analyzer and TPR. It had shown complete ethanol conversion at 773 K, but the selectivity in hydrogen generation was found higher for 10% Ni/ZSM-5 catalyst as compared to 10% Co/ZSM-5. The 10% Ni/ZSM-5 catalyst has about 72% hydrogen selectivity at temperature 873 K. It indicates that Ni is a more sustainable catalyst as compared to Co with ZSM-5 support for ESR. The C_2H_4 was found major undesirable products up to 823 K temperature. Nevertheless, the 10% Ni/ZSM-5 catalyst had shown its stability for high temperature(873 K) ESR performance.     

CFD analysis of performance improvement of the Savonius water turbine by using an impinging jet duct design

The majority of research on water turbines focuses on design improvement of large-scale hydrokinetic turbines for power generation, which may have delayed the utilization of kinetic energy contained in rivers and canals. The aim of this paper is to improve the efficiency of a two bladed Savonius type cross-flow hydrokinetic turbine, which can be used as an energy converter to harness free-stream kinetic energy of water. An impinging jet duct design is presented for improving performance of the Savonius turbine in wind application as seen from literature. The performance of the modified turbine is evaluated using CFD software Fluent, and is compared with that of a simple two bladed Savonius water turbine and some of the prominent literature designs of the Savonius turbine. It is shown that the present design exhibits improved performance compared to the selected designs of the Savonius turbine.Further an insight of the improved performance of the modified turbine is also obtained from flow physics study.     

Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms,kinetics and statistical error analysis

In the present study we made an effort to deploy eco-friendly synthesized reduced graphene oxide/Lanthanum Alluminate nanocomposites (RGO-LaAlO₃) and Lanthanum Alluminate (LaAlO₃) as adsorbents to remove dye from the synthetic media. XRD, SEM, BET surface area and EDX have been used to characterize the above-mentioned adsorbents. The impacts of different factors like adsorbent dosage, the concentration of adsorbate and PH on adsorption were studied. The best fit linear and nonlinear equations for the adsorption isotherms and kinetic models had been examined. The sum of the normalized errors and the coefficient of determination were used to determine the best fit model. The experimental data were more aptly fitted for nonlinear forms of isotherms and kinetic equations. Pseudo-second-order and Freundlich isotherm model fits the equilibrium data satisfactorily. Methyl orange (MO) has been used as model dye pollutant and maximum adsorption capacity was found to be 469.7 and 702.2 mg g^?1 for LaAlO₃ and RGO-LaAlO₃, respectively.     

Linearity Distortion Analysis of Junctionless Quadruple Gate MOSFETs for Analog Applications

Silicon - This paper examines a Junctionless quadruple gate (JLQG) MOSFET for analog and linearity distortion performance by numerically calculating transconductance and its higher order...     

A combined experimental‐numerical framework for residual energy determination in spent lithium‐ion battery packs

The present research proposes a combined framework that evaluates remaining capacity, material behavior, ions concentration of remaining metals, and current rate of chemical reactions of spent Li‐ion batteries accurately. Voltage, temperature, internal resistance, and capacity were studied during charging and discharging cycles. Genetic programming was applied on the obtained data to develop a model to predict remaining capacity. The results of experimental work and those estimated from model were found to be correlated, confirming the validation of model. Materials structure and electrochemical behavior of electrodes during cycles were studied by cyclic voltammetry, scanning electron microscopy, and energy dispersion spectrum.