Determination of Precise Unit-Cell Parameters of the α-Tricalcium Phosphate Ca3(PO4)2 Through High-Resolution Synchrotron Powder Diffraction

Unit-cell parameters of the α-tricalcium phosphate [TCP; Ca₃(PO₄)₂] were investigated using high-resolution synchrotron powder diffraction and the Rietveld method. The diffraction experiment was conducted at 29°C at the BL-15XU experimental station of SPring-8, Japan. Precise unit-cell parameters of the α-TCP were obtained; a =12.87271 (9), b =27.28034(8), c =15.21275(12) Å, α=γ=90°, and β=126.2078(4)°. The calculated density of α-TCP (2.8677 g/cm³) is smaller than that of β-TCP, indicating the "looser" structure of α-TCP.     

Microstructure of ion-implanted region in TiNi alloy

TiNi alloy samples implanted with various fluences of 3 MeV Cu²⁺ ions were characterized by transmission electron microscope (TEM) and X-ray diffractometer. Cross-sectional TEM images of the samples showed that amorphous region was seen at the fluence of 10¹⁴ ions cm^?2 in case of ion implantation at 300 K of the substrate temperature, but in case of ion implantation at 100 K it did not appear even at 10¹⁵ ions cm^?2. These results were also confirmed by X-ray diffraction profiles of the same samples. Consequently, the extent of microstructure change of TiNi alloy by ion implantation was different depending on the substrate temperature.     

Ferroelectric and Magnetic Properties in Room‐Temperature Multiferroic GaxFe2−xO3 Epitaxial Thin Films

GaFeO₃‐type iron oxide is a promising room‐temperature multiferroic material due to its large magnetization. To expand its usability, controlling the ferroelectric and magnetic properties is crucial. In this study, high‐quality Ga_xFe_2–xO₃ (x = 0–1) epitaxial films are fabricated and their properties are systematically investigated. All films exhibit room‐temperature out‐of‐plane ferroelectricity, showing that the coercive electric field (E_c) decreases monotonically with x. Additionally, the films show in‐plane ferrimagnetism with a Curie temperature (T_C) >350 K at x = 0–0.6. The coercive magnetic field (H_c) decreases with x at x ≤ 0.6, but shows a constant value at x > 0.6, whereas the saturated magnetization (M_s) increases with x at x ≤ 0.6, but decreases with x at x > 0.6. X‐ray magnetic circular dichroism reveals that the large magnetization at x = 0.6 is derived from Fe³⁺ (3d⁵) at octahedral sites. The controllable range of the E_c, H_c, and M_s values at room temperature (400–800 kV cm^?1, 1–8 kOe, and 0.2–0.6 µ_B/f.u.) is very wide and differs from those of well‐known multiferroic BiFeO₃. Furthermore, the Ga_xFe_2?xO₃ films exhibit room‐temperature magnetocapacitance effects, indicating that adjusting T_C near room temperature is useful to achieve large room‐temperature magnetocapacitance behavior.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.     

Antihypertensive Effect of Salt-Free Soy Sauce,a New Fermented Seasoning,in Spontaneously Hypertensive Rats

ABSTRACT: In this study, we focused on the antihypertensive effect of newly fermented salt-free soy sauce (SFS) in spontaneously hypertensive rats (SHRs). A 13-wk oral administration of SFS was performed daily in 8- to 21-wk-old SHRs with a dose of 200 mg/kg of body weight/d. The systolic (SBP) and diastolic (DBP) blood pressures were measured for each week during the experimental period. As a result, a significant (P < 0.01) BP lowering effect was observed from the 5th d to the end of the experiment in the SFS group compared with the control group (ΔSBP_21-wk: 27 mmHg, ΔDBP_21-wk: 20 mmHg). In contrast to such substantial effect by SFS intake, angiotensin I-converting enzyme activities in blood and local organs as well as pharmaceutical parameters such as serum Na⁺ or K⁺ level did not show any significant difference between in both SFS and control groups. Vasoconstriction experiment using thoracic aorta rings from 21-wk SHRs provided an interesting result that the rings from the SFS group evoked a >2-fold higher increase in the angiotensin II-stimulated constrictive response compared with the rings from the control group (P = 0.012), which suggested that the SFS-intake would be effective in possessing a higher vessel tone. Practical Application: In this study, we investigated the antihypertensive effect of newly fermented SFS in SHRs. As a result of 13-wk SFS-administration, we found a significant antihypertensive effect of the SFS. This finding strongly demonstrates that the developed SFS would be greatly beneficial for health and useful for health-related industries.     

Comparison of CTOD standards: BS 7448-Part 1 and revised ASTM E1290

Crack tip opening displacement (CTOD) has been calculated using the plastic hinge model with an assumed rotational center since the British Standards Institution (BS) standardized BS5762 in 1979. The American Society for Testing and Materials (ASTM) accepted the plastic hinge model and standardized E1290 in 1989. However, ASTM revised E1290 in 2002, and has proposed a conversion from J to CTOD. CTOD-based fracture toughness evaluation has been widely used for the defect assessment of many welded structural components, and two different CTOD calculations could lead to confusion for Fitness-for-Service. In this study, the effects of CTOD testing methodologies on CTOD values were investigated according to round robin tests conducted by the Japan Welding Engineering Society (WES), and the concept of CTOD as a fracture parameter is discussed.     

Photocatalytic decomposition of gaseous HCHO over a titanium dioxide film formed on a hydrophobic PET sheet

BACKGROUND: The authors (Chem Eng J 148, 234 (2009)) previously demonstrated the excellent performance of a photocatalytic reactor with a parallel array of nine light sources. To enhance the possibility of practical application of this reactor, the present work explores the use of a PET (polyethylene terephthalate) sheet as a new cheap material to support TiO₂, as an alternative to glass tubes. A method of coating the hydrophobic PET sheet with a TiO₂ film using an aqueous coating solution is investigated and the performance of the TiO₂‐PET sheet prepared evaluated. RESULTS: The affinity of the coating solution for the PET sheet is greatly enhanced by addition of 0.01% (w/w) nonionic surfactant (polyoxyethylene lauryl ether). A relatively uniform thin TiO₂ film is formed on the entire surface of the PET sheet by applying the coating solution to the PET sheet and drying it at 100 °C. Decomposition experiments of gaseous HCHO indicate that the photocatalytic activity, although initially low, is increased with repeated use. This is because surfactant molecules added interfere initially with the decomposition of HCHO. After their decomposition, the TiO₂–PET sheet decomposes HCHO at almost the same rate as does the TiO₂–glass tube. CONCLUSION: The photocatalytic reactor with a parallel array of nine light sources can utilize a PET sheet as TiO₂ support with a reduction in material cost. Copyright © 2011 Society of Chemical Industry     

Layered mixed-anion compounds: Epitaxial growth,active function exploration,and device application

Optoelectronic properties and device applications of layered mixed-anion compounds such as oxychalcogenide LaCuOCh (Ch = chalcogen) and oxypnictide LaT_MOPn (T_M = 3d transition metal, Pn = pnicogen) are reviewed. Several distinctive functions have been found in these materials based on our original material exploration concept. Fabrication of high-quality epitaxial films of LaCuOCh leads to clarifying the excellent electrical and optical properties such as high hole mobility of 8 cm²/(V s) and heavy hole doping at >10²¹ cm^?3 in LaCuOSe, and sharp and tunable-wavelength photoluminescence in the solid–solution systems in LaCuOCh. In addition, a room temperature operation of a light-emitting diode is demonstrated using LaCuOSe as a light-emitting layer. These results suggest that the layered oxychalcogenides have potential for light-emitting layers as well as transparent hole-injection layers in organic/inorganic light-emitting diodes. Furthermore, by extending the material system from the copper-based oxychalcogenides to isostructural compounds, transition metal-based oxypnictides LaT_MOP (T_M = Fe, Ni), we have found novel superconductors, LaFeOP and LaNiOP.     

Fundamental Behavior of Direct-Coupled Submicrosecond Pulse Energization in Electrostatic Precipitators

The fundamental characteristics of the direct-coupled pulse energization in electrostatic precipitators (EP's) are investigated in a test rig comprised of a coal pulverizing facility, a furnace, a gas cooling system, and an EP. The EP consisted of a corona electrode with barbed wires and a collection electrode with 300-mm duct spacing. This simulates the type of EP normally used in a coal-fired power station. The pulse-energized collection field shows a very high collection performance of more than 99 percent collection efficiency and the performance enhancement compared to the conventional dc energization, causing very severe back corona, becomes as large as H = 2.50.H is the enhancement factor in terms of the Deutsch migration velocity in the case of the very high resistivity dust of rd = 2 x 1013 ?cm at the gas temperature of Tg = 150°C. Even at the lower level of the dust resistivity at Tg = 110°C, where no back corona occurs in the dc-energized collection field, the performance enhancement is as large as H = 1.21. The mechanism of such great performance enhancement is likely to be the result of the very uniform and very intense formation of corona plasmas on the wires as a result of the very fast rise in the pulse voltage applied and a special sawtooth waveform of the operating voltage between the corona and collection electrodes.     

Evaluation of selective plating media for the detection of heat- or freeze-injured Staphylococcus aureus

The efficacy of Baird-Parker (BP) agar, mannitol-salt-egg yolk (MSEY) agar and mannitol salt (MS) agar in detecting Staphylococcus aureus FRI-100 heated at 52 degrees C for 20 min in 100 mmol/L potassium phosphate buffer was determined. Brain heart infusion agar with 1% pyruvate (BHIP agar) supported the highest recovery of injured cells and was used as the control medium. Of the three selective media, significantly higher recovery of heat-injured cells was observed on BP agar than MSEY agar, and the poorest recovery was observed on MS agar (p < 0.05). Low recovery of unheated cells was obtained for MS compared with other media (p < 0.05). A reduction in populations occurred gradually in reagent-grade water stored for 14 days at -20 degrees C. There was no significant difference between BHIP agar and MS agar in the number of freeze-injured cells recovered from 1 to 14 days.