Preparation of lithium-ion polymer battery using LiNi1/3Co1/3Mn1/3O2 as a cathode material and its electrochemical properties

In this work, LiNi_1/3Mn_1/3Co_1/3O₂ powders were synthesized from co-precipitated spherical metal hydroxide. In the voltage range of 2.8–4.2, 2.8–4.4, and 2.8–4.6 V, the discharge capacities of LiNi_1/3Mn_1/3Co_1/3O₂ electrode were 163, 177, and 193 mAh⋅g⁻¹, respectively. A gel polymer electrolyte (GPE) was also prepared using polyoxyalkylene glycol acrylate (POAGA) as a macromonomer. LiNi_1/3Mn_1/3Co_1/3O₂/GPE/graphite cells were prepared and their electrochemical properties were evaluated at various current densities and temperatures. The ionic conductivity of the GPE was more than 6.2 × 10⁻³ S⋅cm⁻¹ at room temperature. POAGA-based cells were showed good electrochemical performances such as rate capability, low-temperature performance, and cycleability.     

Preparation of a sensor substrate using functionalized mesoporous silica on a gold film for surface plasmon resonance (SPR) spectroscopy

The use of surface plasmon resonance (SPR) spectroscopy has been applied to a wide variety of fields such as biosensors and surface analysis instruments. In general, a SPR substrate is prepared using self-assembled monolayer (SAM) method of organic molecules as receptor for the target on a layer of gold or silver. However, mesoporous inorganic materials such as SBA-15 have benefits as sensor substrate for SPR. Mesoporous silica has a large surface area which receptor molecule can be attached and has a rigid body which has an excellent stability in the extreme condition compared to organic sensing layer. We prepared an organic modified mesoporous silica and successfully immobilized it on a gold surface, in an attempt to use as a substrate for SPR spectroscopy. For the comparison of sensitivity of prepared substrate, Pt²⁺ detection was selected as a model system. Substrate prepared in this study exhibited the capability of selective sensing for Pt²⁺ ions.     

High performance series-resonance energy-recovery circuit for plasma display panel

A new high performance series-resonance energy-recovery circuit (ERC) for a plasma display panel (PDP) is proposed. Two different ERCs are used for both sides of the PDP, and the slow falling and fast rising times are employed. Therefore, it features the zero voltage switching, low electromagnetic interference, low current stress, no severe voltage notch, and high energy-recovery capability.     

Advances in Soft Materials for Sustainable Electronics

In the current shift from conventional fossil-fuel-based materials to renewable energy,ecofriendly mate-rials have attracted extensive research interest due to ...     

Polymeric (SU-8) optical microscanner driven by electrostatic actuation

A torsional micromechanical scanner was fabricated using photosensitive polymer (SU-8). The proposed polymer-based optical microscanner with reduced torsional stiffness offers a new approach to increase scanning angles. The scanner consists of two parts; the top layer (micro mirror and electrodes) and the bottom layer (anchors and electrodes). The SU-8 scanner is actuated by electrostatic force generated by gap-closing electrodes. For the fabricated optical scanner with the mirror size of 3 × 3 mm², the experimentally obtained scanning angles were 0.43° for 60 Hz (non-resonant) and 1.54° for 1.13 kHz (resonant) at the input voltage of 160 V. This paper also proposes a simple and new fabrication method, which can effectively control the stiffness of the torsional springs by molding SU-8 photoresist through V-groove on the silicon substrate, thereby increasing the scanning angles.     

Mass Spectrometry-Based Disulfide Mapping of Lysyl Oxidase-like 2

Lysyl oxidase-like 2 (LOXL2) catalyzes the oxidative deamination of peptidyl lysines and hydroxylysines to promote extracellular matrix remodeling. Aberrant activity of LOXL2 has been associated with organ fibrosis and tumor metastasis. The lysine tyrosylquinone (LTQ) cofactor is derived from Lys653 and Tyr689 in the amine oxidase domain via post-translational modification. Based on the similarity in hydrodynamic radius and radius of gyration, we recently proposed that the overall structures of the mature LOXL2 (containing LTQ) and the precursor LOXL2 (no LTQ) are very similar. In this study, we conducted a mass spectrometry-based disulfide mapping analysis of recombinant LOXL2 in three forms: a full-length LOXL2 (fl-LOXL2) containing a nearly stoichiometric amount of LTQ, Δ1-2SRCR-LOXL2 (SRCR1 and SRCR2 are truncated) in the precursor form, and Δ1-3SRCR-LOXL2 (SRCR1, SRCR2, SRCR3 are truncated) in a mixture of the precursor and the mature forms. We detected a set of five disulfide bonds that is conserved in both the precursor and the mature recombinant LOXL2s. In addition, we detected a set of four alternative disulfide bonds in low abundance that is not associated with the mature LOXL2. These results suggest that the major set of five disulfide bonds is retained post-LTQ formation.     

Fabrication of Al matrix composite reinforced with submicrometer-sized Al<Subscript>2</Subscript>O<Subscript>3</Subscript> particles formed by combustion reaction between HEMM Al and V<Subscript>2</Subscript>O<Subscript>5</Subscript> composite particles during sintering

To fabricate an Al-V matrix composite reinforced with submicron-sized Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases, high energy mechanical milling (HEMM) and sintering were employed. By increasing the milling time, the size of mechanically milled powder was significantly reduced. In this study, the average powder size of 59 μm for Al, and 178 μm for V₂O₅ decreased with the formation of a new product, Al-Al₂O₃-Al_xV_y, with a size range from 1.3 μm to 2.6 μm formed by the in-situ combustion reaction during sintering of HEM milled Al and V₂O₅ composite powders. The in-situ reaction between Al and V₂O₅ during the HEMM and sintering transformed the Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases. Most of the reduced V reacted with excess the Al to form Al_xV_y (Al₃V, Al₁₀V) with very little V dissolved into Al matrix. By increasing the milling time and weight percentage of V₂O₅, the hardness of the Al-Al₂O₃-Al_xV_y composite sintered at 1173 K increased. The composite fabricated with the HEMM Al-20wt.%V₂O₅ composite powder and sintering at 1173 K for 2 h had the highest hardness.