Discomfort luminance level of head-mounted displays depending on the adapting luminance

The Images in an immersive head-mounted display (HMD) for virtual reality provide the sole source for visual adaptation. Thus, significant, near-instantaneous increases in luminance while viewing an HMD can result in visual discomfort. Therefore, the current study investigated the luminance change necessary to induce this discomfort. Based on the psychophysical experiment data collected from 10 subjects, a prediction model was derived using four complex images and one neutral image, with four to six levels of average scene luminance. Result showed that maximum area luminance has a significant correlation with the discomfort luminance level than average, median, or maximum pixel luminance. According to the prediction model, the discomfort luminance level of a head-mounted display was represented as a positive linear function in log₁₀ units using the previous adaptation luminance when luminance is calculated as maximum area luminance.     

The characteristics of Li(CoxNi1 − x)O2 cathode powders formed from the fine-sized Co3O4/NiO precursor powders

Li(Co_xNi_1 − x)O₂ (0 ≤ x ≤ 1) cathode powders were prepared by solid state reaction method using Co₃O₄/NiO precursor powders obtained by spray pyrolysis. The effect of the ratios of cobalt and nickel components on the characteristics of Co₃O₄/NiO precursor and Li(Co_xNi_1 − x)O₂ cathode powders were investigated. The Co₃O₄/NiO precursor powders with the ratios of cobalt and nickel components as 1/0, 0.75/0.25 and 0.5/0.5 had submicron size and regular morphologies. On the other hand, the Co₃O₄/NiO powders with the high contents of nickel component had aggregated morphologies of submicron size primary powders. The fine-sized precursor powders formed the fine-sized LiCoO₂ and Li(Co_0.75Ni_0.25)O₂ cathode powders by solid state reaction with LiOH powders. However, the high contents of the nickel component of the Co₃O₄/NiO precursor powders formed the Li(Co_xNi_1 − x)O₂ (0 ≤ x ≤ 0.5) cathode powders with aggregated morphologies and large sizes. The discharge capacities of the powders increased with increasing the nickel content into the Li(Co_xNi_1 − x)O₂ cathode powders up to 188 mAh/g.     

Detection and enumeration of Salmonella enteritidis in homemade ice cream associated with an outbreak: comparison of conventional and real-time PCR methods

Salmonellosis caused by Salmonella Enteritidis (SE) is a significant cause of foodborne illnesses in the United States. Consumption of undercooked eggs and egg-containing products has been the primary risk factor for the disease. The importance of the bacterial enumeration technique has been enormously stressed because of the quantitative risk analysis of SE in shell eggs. Traditional enumeration methods mainly depend on slow and tedious most-probable-number (MPN) methods. Therefore, specific, sensitive, and rapid methods for SE quantitation are needed to collect sufficient data for risk assessment and food safety policy development. We previously developed a real-time quantitative PCR assay for the direct detection and enumeration of SE and, in this study, applied it to naturally contaminated ice cream samples with and without enrichment. The detection limit of the real-time PCR assay was determined with artificially inoculated ice cream. When applied to the direct detection and quantification of SE in ice cream, the real-time PCR assay was as sensitive as the conventional plate count method in frequency of detection. However, populations of SE derived from real-time quantitative PCR were approximately 1 log higher than provided by MPN and CFU values obtained by conventional culture methods. The detection and enumeration of SE in naturally contaminated ice cream can be completed in 3 h by this real-time PCR method, whereas the cultural enrichment method requires 5 to 7 days. A commercial immunoassay for the specific detection of SE was also included in the study. The real-time PCR assay proved to be a valuable tool that may be useful to the food industry in monitoring its processes to improve product quality and safety.     

Preenrichment versus direct selective agar plating for the detection of Salmonella Enteritidis in shell eggs

The relative effectiveness of two methods for the recovery of Salmonella Enteritidis (SE) from jumbo and medium shell eggs was compared. The first method used in the comparison consisted of a preenrichment of the sample, and the second method was developed by the U.S. Department of Agriculture's Animal and Plant Health Inspection Service (APHIS). Three bulk lots of blended, pooled eggs, each containing 220 liquid whole eggs that were thoroughly mixed manually were artificially inoculated with different levels of SE cells between approximately 10(0) and 10(3) CFU/ml. Twenty samples containing the contents of approximately 10 eggs each (by weight) were withdrawn from each of the inoculated bulk lots and incubated for 4 days at room temperature (ca. 23 degrees C). For the APHIS method, each sample was cultured by direct plating onto brilliant green (BG), brilliant green with novobiocin (BGN), xylose lysine desoxycholate (XLD), and xylose lysine agar Tergitol 4 (XLT4) agars. For the preenrichment method, 25-g portions from each pool were enriched in modified tryptic soy broth with 30 mg/liter of FeSO4. After 24 h of incubation, the preenrichments were subcultured to tetrathionate and Rappaport-Vassiliadis broths, and streaked to BG, BGN, bismuth sulfite, XLD, and XLT4 agar plates. SE isolates were confirmed biochemically and serologically. In all of the experiments, the preenrichment method recovered significantly more SE isolates (P < 0.05) of all the phage types and inoculum levels than did the APHIS method. From a total of 539 jumbo egg test portions analyzed, 381 (71%) were SE-positive by the preenrichment method and 232 (43%) were positive by the APHIS method. From a total of 360 medium egg test portions analyzed, 223 (62%) were SE-positive by the preenrichment method and 174 (48%) were positive by the APHIS method. The preenrichment method provided greater sensitivity for the isolation of SE in contaminated egg slurries than did the APHIS method.     

Correlations between histopathologic and dermoscopic findings in Korean actinic keratosis

Skin biopsy for AK diagnosis is usually performed on only a limited part of the whole lesion. Therefore, a clinical diagnosis is important. According to a study, there is no significant correlation between histopathological and clinical classification system. We examined the correlation between microscopic information and dermoscopic findings to deduce if dermoscopic information reflects histopathologic grade severity. Forty seven patients with histologically confirmed AK were enrolled and positive ratio of red pseudonetwork, rosette, red background and targetoid signs, white‐to‐yellow scale, white structureless area, and pigmentation from dermoscopic findings were investigated. Furthermore, viable epidermal thickness, vessel lumen dimensions, existence and thickness of ortho‐ and parakeratosis, degree of sola elastosis, flag sign existence, and Roewert‐Huber classification were measured as histologic findings. Red background did not show a significant correlation with vascular dimension or viable epidermal thickness. When targetoid sign was present, vascular dimension was significantly larger but showed no correlation with viable epidermal thickness, parakeratosis or orthokeratosis. Solar elastosis level was significantly higher when white‐to‐yellow scale was present. According to Spearman's correlation analysis, ortho/parakeratotic thickness showed correlations with each other. The negative correlation between viable epidermal thickness and vascular dimension was also shown. Roewert‐Huber histologic AK classification showed no correlation with any factors we checked. Factors considered to be characteristic features of AK in dermoscopy seemed unassociated with histologic AK classification and additional research is needed to determine degree of dysplasia of AK lesions using dermoscopy.     

Enhanced antimicrobial activity of nisin-loaded liposomal nanoparticles against foodborne pathogens

This study was designed to evaluate the prolonged antimicrobial stability of nisin-loaded liposome (LipoN) nanoparticles against Listeria monocytogenes and Staphylococcus aureus. The sizes of bare liposomes and LipoN were uniformly distributed between 114 and 125 nm. The nanoparticles were homogeneously dispersed in water with less than 0.2 of polydispersity index. The zeta potential value of LipoN was +17.1 mV due to the positive charged nisin, attaining 70% of loading efficiency. The minimum inhibitory concentration of LipoN against L. monocytogenes and S. aureus was 320 international unit/mL. The LipoN significantly enhanced the antimicrobial stability in brain heart infusion agar compared to free nisin. The numbers of L. monocytogenes and S. aureus exposed to LipoN were effectively reduced by more than 6 log colony-forming unit/mL after 48 and 72 h of incubation, respectively. These results provide useful information for the development of antimicrobial delivery system to improve food safety.     

Gallic Acid Grafted Chitosan Has Enhanced Oxidative Stability in Bulk Oils

Gallic acid (GA) was grafted in chitosan and the effects of GA grafted chitosan (GA‐g‐CS) on the oxidative stability in bulk oil was tested at 60 and 140 °C. To text oxidative stability in oils, headspace oxygen content, conjugated dienoic acid (CDA) value, p‐anisidine value (p‐AV), and acid value were determined. Chitosan itself did not show antioxidative or prooxidative effects in oils at 60 °C. However, GA‐g‐CS and GA acted as antioxidants at 60 °C. At 140 °C heating with moisture supplied condition, different results were observed. GA‐g‐CS acted as antioxidants based on the results of CDA and p‐AV. However, chitosan showed the highest oxidative stability based on results of acid value and brown color formation at 140 °C. This could be due to reduction of moisture content by chitosan. GA was continuously released from GA‐g‐CS in bulk oil. This might have provided extra antioxidant activities to oils.     

Constituents isolated from Glehnia littoralis suppress proliferations of human cancer cells and MMP expression in HT1080 cells

Crude extract and solvent-partitioned fraction of Glehnia littoralis were found to possess different anti-proliferative effects against AGS, HT1080 and U937 human cancer cells. The crude extracts and solvent fractions dose-dependently inhibited cell proliferation. Especially, n-hexane and 85% aqueous MeOH fractions exhibited comparatively higher anti-proliferative effects and reduced expressions of Bcl-2, COX-2 and iNOS genes. Systematic separation of all solvent fractions by chromatographic methods led to the isolation of three glucopyranosides, four furanocoumarins and two polyacetylenic alcohols. All the nine compounds were evaluated for their inhibitory effects against both proliferation of human cancer cells and expressions of MMP-2 and -9 in HT1080 cells. Two polyacetylenic alcohols exerted the highest inhibitory activity against both human cancer cell lines, and MMP-2 and -9. These results suggest that G. littoralis may possibly be used as a valuable chemopreventive agent or food supplement for reducing cancer risk.     

Viscous flow of a Newtonian fluid in a curved channel with flexible moving porous walls

We consider flow of a viscous Newtonian fluid in a curved channel with moving porous walls; the upper wall is flexible and its position in unknown a priori. This work is motivated from a papermaking application namely roll forming. We solve the leading order terms in equations of motion using perturbation methods and present analytical expressions for the variation in channel size, pressure, and viscous shear. The stability of the solution is also examined and we report the conditions for marginal stability.     

Isolation and characterization of Cronobacter from desiccated foods in Korea

A total of 115 desiccated food samples, including agricultural and marine products, were investigated for the presence of Cronobacter. Cronobacter species were characterized with biochemical tests. Antibiotic resistance was assessed with the disk diffusion method, and the molecular subtypes of Cronobacter isolates were identified using an automated repetitive sequence-based PCR (rep-PCR) system. A total of 18 (15.7%) Cronobacter strains were isolated from 115 desiccated food products. Fifteen Cronobacter isolates were C. sakazakii (13%), followed by 2 C. dublinensis (1.7%), and 1 C. universalis (0.9%). The most common antibiotic resistance of Cronobacter observed was against cephalothin (77.8%) followed by ampicillin (5.6%). With exception of 2 strains, all Cronobacter strains isolated from different sources were successfully differentiated by using the automated rep-PCR system, indicating that it can be used for the purpose of contamination or outbreak source tracking of the bacteria.