西北地区节水灌溉市场与技术需求

西部开发需要大量的生态用水，从节水灌溉设备市场分析，节水灌溉专用泵阀、新型输水管材、高效低能喷微灌设备及材料的需求量很大，技术需求与亟待研究开发的关键技术和设备也很多。从西北地区水资源状况与需求看，节水灌溉市场有很大潜力。     

高可靠镀Ni／Au工艺及其在微波PTFE电路上的应用

介绍了高可靠电镀Ｎｉ／Ａｕ工艺在ＰＴＦＥ微波印制电路上的应用，并分析了氨基磺酸盐镀软镍和亚硫酸盐镀软金工艺的影响因素及提高Ｎｉ／Ａｕ镀层之间附着力的措施。通过实验及应用证明了与直接镀金工艺相比，在软基材ＰＴＦＥ敷铜箔板上镀Ｎｉ／Ａｕ工艺能大大提高微波电路的可焊性，高温稳定性和长期可靠性，并且用其所制作的微波器件的高频性能也优于直接镀金工业。     

X波段及DBS接收用PHEMT单片低噪声放大器

报道了X波段及DBS接收用单片低噪声放大器的研制结果。利用CAD软件对单片电路进行优化设计，设计工作包括MBE材料、PHEMT器件和单片电路三部分。在研制过程中，开展了关键工艺的专题研究。研究结果为：单级单片放大器在10：5－11．6GHz范围内，NF≤1．82dB，G≥7.72dB；在11．7－12．2GHz范围内，NF≤1．80dB，G≥6．8dB；双级放大器在10．4－11．1GHz范围内，NF≤1．96dB，G≥15．3dB，最低噪声系数为1．63dB，最高增益为16．07dB。     

ATM局域网仿真体系结构的研究

本文在简要叙述了基于ＡＴＭ技术进行局域网仿真的原理后，对局域网仿真体系结构作了一些探讨。考虑的重点是无连接服务和群播功能的实现     

气—液式热管换热器在硫酸工业中的应用研究

本文研制的气－液式热管换热器应用于硫酸生产中ＳＯ３气体的余热回收。它具有传热性能好、流动阻力小、寿命长、体积小、节能效果显著和易清垢等优点。     

φ100mm定径机轧辊孔型设计改进

针对定径机换辊后定径钢管所出现的质量问题,提出了成品机架的轧辊孔型不分配变形量和适当增大孔型直径的改进措施。     

Study on combustion characteristics of blended coals

Power plants in China have to burn blended coal instead of one specific coal for a variety of reasons. So it is of great necessity to investigate the combustion of blended coals. Using a test rig with a capacity of 640 MJ/h with an absolute milling system and flue gas online analysis system, characteristics such as burnout, slag, and pollution of some blended coals were investigated. The ratio of coke and slag as a method of distinguishing coal slagging characteristic was introduced. The results show that the blending of coal has some effect on NO _x but there is no obvious rule. SO _x emission can be reduced by blending low sulfur coal. Translated from Proceedings of the CSEE, 2005, 25(18): 97–103 [译自: 中国电机工程学报]     

Influence of Ti Powder Characteristics on Combustion Synthesis of Porous NiTi Alloy

Porous NiTi shape memory alloy (SMA) is a novel biomedical material used for human hard tissue implant .The influence of elemental titanium powder characteristics such as powder morphology, particle size and specific surface area( SSA) on the minimal ignition temperature ,combustion temperature and final product of porous Ni-Ti SMA fabricated by combustion synthesis method was investigated in this paper by scanning electron microscopy (SEM) and laser diffraction.The preliminary data indicated that the titanium powder characteristics had a strong effect on combustion synthesis of porous NiTi SMA.     

ZJ510L-B汽车用高强度热轧板的试制

珠钢150t电弧炉-LF(VD)-CSP(紧凑式带材生产)流程试生产的5～8mm ZJ510L-B(0．16C--1．22Mn)汽车用高强度热轧板的铁素体晶粒尺寸为6．0～9．2μm，带状组织为1．5～2．5级，强度极限σb562～610MPa，延伸率δ5 32．0％～38．6％。文中还分析和提出了带状组织的形成原因和改进措施。