An efficient microfluidic sorter: implementation of double meandering micro striplines for magnetic particles switching

The ability to trap, manipulate, and separate magnetic beads has become one of the key requirements in realizing an integrated magnetic lab-on-chip biosensing system. In this article, we present the design and fabrication of an integrated magneto-fluidic device for sorting magnetic particles with a sorting efficiency of up to 95%. The actuation and manipulation of magnetic beads are realized using microfabricated square meandering current-carrying micro striplines. The current is alternated between two neighboring micro striplines to switch the magnetic beads to either one of the two outlets. We performed a series of parametric study to investigate the effect of applied current, flow rate, and switching frequency on the sorting efficiency. Experimental results reveal that the sorting efficiency is proportional to the square of current applied to the stripline, and decreases with increasing buffer flow rate and switching frequency. Such phenomena agree well with our theoretical analysis and simulation result. The fastest switching rate, which is limited by the microchannel geometry and bead velocity, is 2 Hz.     

基于ARM-Linux的矿井安全监控系统设计与实现

以当前矿井安全的现状与需求为出发点,对基于ARM-Linux的矿井安全监测控制系统进行深入研究,提出基于嵌入式技术的矿井安全监控系统的总体设计方案;通过构建该平台的模型和分析嵌入式终端的体系结构,阐述了在以Linux操作系统和ARMS3C2410X处理器为核心的终端软硬件基础上,系统各主要功能模块的实现;在所构建的矿井安全监控硬件平台上,应用HTTP协议,成功实现了远程终端对井上监控终端的控制与访问.     

基于二阶梯度的图像增强算法研究

针对PCB图像的特点对图像进行增强处理,使得图像的边缘更加突出,灰度的对比度增加,同时滤除靠近边缘的噪声,为后续图像分割时更有效的选取阈值打下良好基础。使用二阶梯度算子获得图像的增强效果,实验表明,不仅解决了边缘附近噪声去除问题,而且有效地突出了边缘信息,图像的黑白对比分明,尤其是目标图像靠近边缘部分灰度值明显高于其他的非边缘区域。     

CC430F6135的无线智能家居控制系统设计

针对现有家居控制系统功耗大和成本高等缺陷,设计了一种基于CC430F6135单片机的低功耗智能家居控制系统.本系统具有功耗低、控制可靠性高、人性化等特点.介绍了CC430F6135芯片内部集成的RF无线模块特点和家居控制系统的结构原理,给出了硬件设计框图和软件流程,详细分析了中央控制模块、RF无线收发功能模块和触摸屏控...     

Numerical solution of PDEs via integrated radial basis function networks with adaptive training algorithm

This paper develops a mesh-free numerical method for solving PDEs, based on integrated radial basis function networks (IRBFNs) with adaptive residual subsampling training scheme. The multiquadratic function is chosen as the transfer function of the neurons. The nonlinear algebraic equation systems for weights training are solved by Levenberg–Marquardt algorithm. The performance of the proposed method is demonstrated in numerical examples by approximating several functions and solving nonlinear PDEs. The result of numerical experiments shows that the IRBFNs with the adaptive procedure requires less neurons to attain the desired accuracy than conventional radial basis function networks.     

改进的本体中概念相似度计算方法

随着本体的增多,本体异构是本体间互操作的主要障碍,阻碍了本体信息共享,解决本体异构最好的方法是本体映射。本体映射的关键是概念相似度的计算,但现今的计算模型考虑的影响因素比较单一。结合距离语义相似度和属性语义相似度,提出了一种综合语义相似度计算方法。实验证明,该方法可以提高计算结果的精确度。     

基于SSL的软件序列号网上验证分析与实现

在软件序列号网上验证过程中,若数据为明文传输的话,则容易被捕获及分析,从而令验证失效。为降低软件盗版比例,介绍序列号验证技术的基本原理,通过实例详细说明利用SSL加密验证过程的必要性,给出获取SSL服务器证书的不同途径,利用Windows HTTP服务（WinHTTP）为软件开发人员提供解决方案。提出的方法有效、实用且易于实现。     

基于矩阵分解的DLDA特征抽取方法分析

提出两种基于矩阵分解的DLDA特征抽取算法。通过引入QR分解和谱分解(SF)两种矩阵分析方法,在DLDA鉴别准则下,对散布矩阵实现降维,从而得到描述人脸图像样本更有效和稳定的分类信息。该方法通过对两种矩阵分解过程的分析,证明在传统Fisher鉴别分析方法中,矩阵分解同样可以模拟PCA过程对样本进行降维,从而克服了小样本问题。在ORL人脸数据库上的实验结果验证了该算法的有效性。     

UNIFAC-DMD法预测烷烃-氨的汽液相平衡

烷烃-氨的汽液相平衡模型是计算爱因斯坦制冷循环的重要数据.然而在设计氨-水-异戊烷的爱因斯坦制冷循环的过程中,从文献中查阅不到异戊烷一氨的相平衡数据.采用商业软件中基团贡献法UNIFAC-DMD自带的数据库所预测的结果也不尽人意,不能得到特征的蝶形相图.本文利用基团贡献法的原理,通过使用模拟软件,应用文献中得到的丙烷-氨和正丁烷-氨体系的相平衡数据,拟合基团贡献法uNIFAC-DMD中的CH2、NH3的含对温度修正的基团交互参数aCH2NH3,1/K,aCH2NH3,2,aCH2NH3,3/K-1和aNH3CH3,1/K,aNH3CH3,2,aNH3CH3,3/K-1..拟合得到上述基团交互参数值分别为-1 995.4,18.51,-0.037,11 565.3,-68.98,和0.111 4.将此组新参数替换原有基团贡献法的数据库参数,重新预测烷烃-氨的相平衡,成功预测得到了蝶形相图.     

Linear discriminant projection embedding based on patches alignment

Dimensionality reduction is often required as a preliminary stage in many data analysis applications. In this paper, we propose a novel supervised dimensionality reduction method, called linear discriminant projection embedding (LDPE), for pattern recognition. LDPE first chooses a set of overlapping patches which cover all data points using a minimum set cover algorithm with geodesic distance constraint. Then, principal component analysis (PCA) is applied on each patch to obtain the data's local representations. Finally, patches alignment technique combined with modified maximum margin criterion (MMC) is used to yield the discriminant global embedding. LDPE takes both label information and structure of manifold into account, thus it can maximize the dissimilarities between different classes and preserve data's intrinsic structures simultaneously. The efficiency of the proposed algorithm is demonstrated by extensive experiments using three standard face databases (ORL, YALE and CMU PIE). Experimental results show that LDPE outperforms other classical and state of art algorithms.