Microfabrication of polytetrafluoroethylene using SR direct etching

Polytetrafluoroethylene (PTFE) is a very attractive material for various fields because of its chemical resistance, insulation properties, and hydrophobic properties. However, it is difficult to fabricate PTFE microstructures with conventional techniques such as semiconductor processes or micromachining. We have succeeded in the fabrication of high‐aspect‐ratio microfluidics parts from PTFE by direct in‐vacuum photo‐etching utilizing synchrotron radiation (SR) at energy levels from 2 to 12 keV. This paper presents an analysis of the mechanisms of the PTFE microfabrication process and describes newly discovered processing characteristics of PTFE. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 178(4): 49–54, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21152     

Modeling of Nonlinear Magnetizing Characteristics of Pole Transformer for Analyzing Islanding Prevention of Photovoltaic System

With increasing penetration of distributed generators such as photovoltaic (PV) systems in distribution systems, it is very important to quickly detect islanding caused by power system faults in order to assure electrical safety. We have developed a nonlinear magnetizing characteristics model of pole transformers for use in analyzing islanding prevention in PV systems. Basic experiments on the islanding detection were performed for verification of the proposed model. Analytical results obtained by the proposed model agreed well with experimental results.     

Mechanism of Catalytic Effects on AMMO/HMX Composite Propellants Combustion Rates

Thermal decomposition and the burning properties of AMMO/HMX propellants have been investigated. The heat generated by the AMMO decomposition initiated and accelerated the thermal decomposition of HMX, and the reaction between decomposed AMMO and HMX depended upon the heating rate. The rate determining step of the reaction path was different in higher and lower heating rate conditions. 2,2-bis(ethylferrocenyl)propane (CFe) and copper chromite (CuC) significantly altered the mechanisms of the thermal decomposition and the burning properties. CFe showed an increase in burning rate with a slight increase in burning rate exponent. However, CuC yielded high values for the burning rate exponent. The combined additive yielded the highest burning rate with the lowest burning rate exponent. The influence of CuC on the burning rate exponent disappeared by the combination with CFe. Though CFe and the combination additive improved the ignitability of the propellants, the propellant with CuC was difficult to ignite because of the relatively small quantity of heat feedback and/or heat released by the decomposition.     

Contamination levels of PCDDs, PCDFs and Co-PCBs in commercial baby foods in Japan

To examine dioxin contamination in commercial baby foods in Japan, congener analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) were performed on 102 varieties of baby foods obtained from supermarkets in 2001-2002. The toxic equivalent quantity (TEQ) levels for dioxins in samples ranged from < 0.001 to 0.135 pg-TEQ/g wet weight when undetected or trace levels of congeners were taken as zero. Among 102 samples tested, 26 samples exceeded 0.010 pg-TEQ/g. The highest TEQ value was for "sardine, vegetables" (0.135 pg-TEQ/g), followed by "Japanese radish (daikon), sardine" (0.080 pg-TEQ/g). Thus, dioxins were detected at low levels in baby foods containing animal products such as fishes and/or dairy products.     

Experimental study of hydrogen storage with reaction heat recovery using metal hydride in a totalized hydrogen energy utilization system

Experimental results for hydrogen storage tanks with metal hydrides used for load leveling of electricity in commercial buildings are described. Variability in electricity demand due to air conditioning of commercial buildings necessitates installation of on-site energy storage. Here, we propose a totalized hydrogen energy utilization system (THEUS) as an on-site energy storage system, present feasibility test results for this system with a metal hydride tank, and discuss the energy efficiency of the system. This system uses a water electrolyzer to store electricity energy via hydrogen at night and uses fuel cells to generate power during the day. The system also utilizes the cold heat of reaction heat during the hydrogen desorption process for air conditioning. The storage tank has a shell-like structure and tube heat exchangers and contains 50 kg of metal hydride. Experimental conditions were specifically designed to regulate the pressure and temperature range. Absorption and desorption of 5,400 NL of hydrogen was successfully attained when the absorption rate was 10 NL/min and desorption rate was 6.9 NL/min. A 24-h cycle experiment emulating hydrogen generation at night and power generation during the day revealed that the system achieved a ratio of recovered thermal energy to the entire reaction heat of the hydrogen storage system of 43.2% without heat loss.     

Probabilistic Strength at Serviceability Limit State for Normal and SBHS Slender Stiffened Plates Under Uniaxial Compression

International Journal of Steel Structures - Stiffened plates with high slenderness parameters show large out-of-plane deflections, due to elastic buckling, which may occur before the plates reach...     

Neutronic and thermodynamic feasibility of UF6-NpF6 fueled transmutation reactor

Transmutation of neptunium, which is contained in radioactive wastes discharged from nuclear reactors, was investigated as a substitutional method for geologic disposal. We proposed a transmutation reactor fueled with a mixture of gaseous ²³³UF₆ and ²³⁷NpF₆. Neutronic and thermodynamic analysis of the reactor revealed the feasibility of the concept. The reactor has two principal advantages: (1) use of the fuel gas enables on-line reprocessing, (2) ²³⁷Np can be transmuted by a high neutron flux. Our calculation indicated that the transmutation rate of ²³⁷Np was 335 g/year/MW_th, which is much larger than the annual yield of ²³²Np in PWR (6.19 g/year/MW_th).     

Modification of cleanup methods for dioxin analysis in green leafy vegetables and comparison of packing methods for a multi-layer silica gel column

To determine polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) in green leafy vegetables, the cleanup method was modified, and packing methods for a multi-layer silica gel column were compared in food samples. First, the additional cleanup was examined for a mono-ortho PCBs fraction obtained by alumina column chromatography from spinach extract. Small solids such as rough crystals that remained after concentration of the mono-ortho PCBs fraction were identified as long-chain hydrocarbons from leaf epicuticular wax by GC/MS. Cleanup using an activated carbon silica gel column with n-hexane as the washing solvent was effective. Next, multi-layer silica gel columns packed by wet packing and dry packing were compared using komatsuna, salmon and butter as samples. The columns prepared by both methods gave similar values at each isomeric concentration level and showed similar efficiency with favorable recoveries.     

Defective Thyroglobulin: Cell Biology of Disease

The primary functional units of the thyroid gland are follicles of various sizes comprised of a monolayer of epithelial cells (thyrocytes) surrounding an apical extracellular cavity known as the follicle lumen. In the normal thyroid gland, the follicle lumen is filled with secreted protein (referred to as colloid), comprised nearly exclusively of thyroglobulin with a half-life ranging from days to weeks. At the cellular boundary of the follicle lumen, secreted thyroglobulin becomes iodinated, resulting from the coordinated activities of enzymes localized to the thyrocyte apical plasma membrane. Thyroglobulin appearance in evolution is essentially synchronous with the appearance of the follicular architecture of the vertebrate thyroid gland. Thyroglobulin is the most highly expressed thyroid gene and represents the most abundantly expressed thyroid protein. Wildtype thyroglobulin protein is a large and complex glycoprotein that folds in the endoplasmic reticulum, leading to homodimerization and export via the classical secretory pathway to the follicle lumen. However, of the hundreds of human thyroglobulin genetic variants, most exhibit increased susceptibility to misfolding with defective export from the endoplasmic reticulum, triggering hypothyroidism as well as thyroidal endoplasmic reticulum stress. The human disease of hypothyroidism with defective thyroglobulin (either homozygous, or compound heterozygous) can be experimentally modeled in thyrocyte cell culture, or in whole animals, such as mice that are readily amenable to genetic manipulation. From a combination of approaches, it can be demonstrated that in the setting of thyroglobulin misfolding, thyrocytes under chronic continuous ER stress exhibit increased susceptibility to cell death, with interesting cell biological and pathophysiological consequences.