Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

Electron beam sterilization of cyclo olefin polymer leads to polymer degradation and production of alkyl radicals

We investigated the effects of electron‐beam (EB) sterilization on syringe barrels manufactured from cyclo olefin polymer (COP). The chemical structure of the polymer was determined by interpreting the ¹³C NMR and DEPT‐135 spectra of the COP resin. The antioxidants in the resin were identified by analyzing the liquid chromatography‐photo diode array‐mass spectrometry (LC‐PDA‐MS) data for the methanol extract of the resin and the gas chromatography‐mass spectrometry (GC‐MS) data for the supercritical methanol degradation products of the extract. NMR and LC‐PDA‐MS analyses revealed that EB sterilization produces degradation products in the COP main chain and reduces the quantity of the antioxidants in the COP resin. ESR spectra of the EB‐sterilized syringe barrels indicated the presence and location of alkyl radicals, which were generated in the COP main chain by EB sterilization. ESR analyses also indicated that the quantity of alkyl radicals decreased over time. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43498.     

Formation Processes of β-C2S by the Decomposition of Hydrothermally Prepared C-S-H with Ca(OH)2

A mixture of CaO and silicic acid prepared with a Ca/Si ratio of 2.0 was hydrothermally synthesized at 80° to 200°C, and the thermal decomposition behavior of the products (C-S-H with Ca(OH)₂) was analyzed using XRD, ²⁹Si MAS NMR, and the trimethylsililation method (TMS). It was found that the main silicate anion structure of C-S-H was a mixture of a dimer and a single-chain polymer (larger than Si₅O₁₆) and that polymerization advanced with an increase of the synthesizing temperature. On heating, the products decomposed to form β-C₂S. It was found that the decomposition was gradual and that the-higher the temperature of hydrothermal synthesis, the lower was the temperature of the decomposition into β-C₂S. Although the decomposition proceeded to form a monomer (β-C₂S) from the polymer and dimer, this dimer was resistant to heat and did not decompose unless heated to above 400°C.     

中空球状水铝英石/SBR纳米复合材料的制备与性能研究

将天然中空球状水铝英石在水中进行提纯分散处理,采用乳液共混共凝法制备中空球状水铝英石/SBR纳米复合材料,并对其性能进行研究.场发射环境扫描电子显微镜和透射电子显微镜观察表明,中空球状水铝英石原矿粉以聚集体形式存在,聚集体直径约为200 nm,组成聚集体的中空球状小颗粒直径约为13 nm;水铝英石在复合材料中分散良好.与采用直接共混法制备的复合材料相比,采用乳液共混共凝法制备的复合材料定伸应力较小,拉伸强度较大.     

Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.     

Rapid preparation of monodisperse biodegradable polymer nanospheres using a membrane emulsification technique under low gas pressure

Nanospheres of poly(lactide-co-glycolide) (PLGA), a biodegradable polymer, have been prepared using the conventional solvent diffusion method. In this study, a method combining the solvent diffusion method and a two-step (premix) membrane emulsification technique is proposed for the preparation of monodisperse PLGA nanospheres with a diameter of 200 nm. The monodispersity of the PLGA nanospheres was higher than that of nanospheres obtained by the conventional solvent diffusion method. Generally, preparation of small particles or droplets by the membrane emulsification technique requires a supply of high-pressure nitrogen gas to force the emulsion or dispersion solution through the small pores of the membrane. However, in the technique proposed here, low-pressure nitrogen gas (0.02–0.11 kgf/cm²) is sufficient. Thus, using this technique, one can obtain monodisperse PLGA nanospheres with a diameter of 200 nm in a relatively short period of time under low-pressure nitrogen gas.     

Observation of non-chemical equilibrium effect on Ar-CO2-H2 thermal plasma model by changing pressure

The authors developed a two-dimensional one-temperature chemical non-equilibrium (1T-NCE) model of Ar-CO₂-H₂ inductively coupled thermal plasmas (ICTP) to investigate the effect of pressure variation. The basic concept of one-temperature model is the assumption and treatment of the same energy conservation equation for electrons and heavy particles. The energy conservation equations consider reaction heat effects and energy transfer among the species produced as well as enthalpy flow resulting from diffusion. Assuming twenty two (22) different particles in this model and by solving mass conservation equations for each particle, considering diffusion, convection and net production terms resulting from hundred and ninety eight (198) chemical reactions, chemical non-equilibrium effects were taken into account. Transport and thermodynamic properties of Ar-CO₂-H₂ thermal plasmas were self-consistently calculated using the first-order approximation of the Chapman-Enskog method. Finally results obtained at atmospheric pressure (760 Torr) and at reduced pressure (500, 300 Torr) were compared with results from one-temperature chemical equilibrium (1T-CE) model. And of course, this comparison supported discussion of chemical non-equilibrium effects in the inductively coupled thermal plasmas (ICTP).     

Multi-class grasping classifiers using EEG data and a common spatial pattern filter

This paper describes the classification of various human actions from brain activity. In particular, we focus on grasping movements and estimate grasping patterns from electroencephalogram (EEG) data. EEG data is converted to grasping features by using a common spatial pattern filter (CSP filter), and the features are subsequently classified into grasping categories by using the k-nearest neighbor method. We tested the pipeline of feature extraction and classification on the EEG dataset. The EEG data were acquired while participants grasped an object according to the Cutkosky’s grasping taxonomy, in which grasping movements are categorized into nine power-type grasping patterns and seven precision-type grasping patterns. The best classification rate for 9-class power-type grasping patterns was 48% and for 7-class precision-type grasping patterns was 40%.     

Investigation for Necessity of Dispersivity and Tortuosity in the Dusty Gas Model for a Binary Gas System in Soil

Diffusion, dispersion, and advection are important processes in multi-gas systems in soils. To date, both Fick's model and the Dusty Gas (DG) model have been used to model the movement of gases in these systems. Dispersion is included in the dispersion-advection equation with Fick's Model for the movement of gases in gas-phase of soil, yet the movement of gases in multi-component gas-soil systems is considered to be expressed more accurately by the DG model than by Fick's model. However to date, no study has investigated the necessity of considering dispersion in the Dusty Gas (DG) model. We carried out column experiments for nitrogen-methane, nitrogen-carbon dioxide, and carbon dioxide-methane binary gas systems in sandy soil, and also did simulations on the same systems using both Fick's model and the DG model. A comparison of the results of the column experiments with our simulations confirmed that there was no need to consider the dispersion in the advection-diffusion equations with the DG model when the velocity of gas was 0.05-0.4 cm/s in Toyoura sand. Furthermore, our experiments and simulations with the DG model showed that, rather than dispersion, tortuosity should be taken into account in application of the DG model to the above condition.     

Strength properties of polymer mortar panels using methyl methacrylate solution of waste expanded polystyrene as binder

The present study examines the applicability of polymer mortar panels using a methyl methacrylate (MMA) solution of waste expanded polystyrene (EPS) to develop effective recycling processes for the EPS, referring to the strength properties of a polymer-impregnated mortar panel with almost the same performance as commercial products. An MMA solution of EPS is prepared by dissolving EPS in MMA, and unreinforced and steel fiber-reinforced polymer mortars are mixed using the EPS-MMA-based solution as a liquid resin or binder. Polymer mortar panels (PMPs) using the EPS-MMA-based polymer mortars without and with steel fiber and crimped wire cloth reinforcements and steel fiber-reinforced polymer-impregnated mortar panel (PIMP) are prepared on trial, and tested for flexural behavior under four-point loading. The EPS-MMA-based PMPs are more ductile than the PIMP, and have a high load-bearing capacity. Consequently, they can replace PIMP in practical applications.