Experimental investigation of structure vulnerabilities to firebrand showers

Attempting to experimentally quantify the vulnerabilities of structures to ignition from firebrand showers has remained elusive. The coupling of two facilities has begun to unravel this difficult problem. The NIST Firebrand Generator (NIST Dragon) is an experimental device that can generate a firebrand shower in a safe and repeatable fashion. Since wind plays a critical role in the spread of WUI fires in the USA and urban fires in Japan, NIST has established collaboration with the Building Research Institute (BRI) in Japan. BRI maintains one of the only full scale wind tunnel facilities in the world designed specifically for fire experimentation; the Fire Research Wind Tunnel Facility (FRWTF). The present investigation is aimed at extensively quantifying firebrand penetration through building vents using full scale tests. A structure was placed inside the FRWTF and firebrand showers were directed at the structure using the NIST Dragon. The structure was fitted with a generic building vent, consisting of only a frame fitted with a metal mesh. Six different mesh sizes openings were used for testing. Behind the mesh, four different materials were placed to ascertain whether the firebrands that were able to penetrate the building mesh assembly could ignite these materials. Reduced scale test methods afford the capability to test new vent technologies and may serve as the basis for new standard testing methodologies. As a result, a new experimental facility developed at NIST is presented and is known as the NIST Dragon's LAIR (Lofting and Ignition Research). The NIST Dragon's LAIR has been developed to simulate a wind driven firebrand attack at reduced scale. The facility consists of a reduced scale Firebrand Generator (Baby Dragon) coupled to a bench scale wind tunnel. Finally, a series of full scale experiments were conducted to visualize the flow of firebrands around obstacles placed downstream of the NIST Dragon. Firebrands were observed to accumulate in front of these obstacles at a stagnation plane, as was observed when the structure was used for firebrand penetration through building vent experiments, due to flow recirculation. The accumulation of firebrands at a stagnation plane presents a severe threat to ignitable materials placed near structures.     

Attentional modulation of the mere exposure effect.

The mere exposure effect refers to the phenomenon where previous exposures to stimuli increase participants’ subsequent affective preference for those stimuli. This study explored the effect of selective attention on the mere exposure effect. The experiments manipulated the to-be-attended drawings in the exposure period (either red or green polygons in Experiments 1 and 2; both red and green polygons in Experiments 3 and 4) and black to-be-evaluated drawings in the affective judgment period (morphologically identical to the red or green polygons in Experiments 1 and 4; morphologically identical to the composite drawings in Experiments 2 and 3). The results showed a significant mere exposure effect only for the target shapes involved in attentional selection, even when the participants could recognize the nontarget shapes. This indicates that selective attention modulated the mere exposure effect. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

Electron beam sterilization of cyclo olefin polymer leads to polymer degradation and production of alkyl radicals

We investigated the effects of electron‐beam (EB) sterilization on syringe barrels manufactured from cyclo olefin polymer (COP). The chemical structure of the polymer was determined by interpreting the ¹³C NMR and DEPT‐135 spectra of the COP resin. The antioxidants in the resin were identified by analyzing the liquid chromatography‐photo diode array‐mass spectrometry (LC‐PDA‐MS) data for the methanol extract of the resin and the gas chromatography‐mass spectrometry (GC‐MS) data for the supercritical methanol degradation products of the extract. NMR and LC‐PDA‐MS analyses revealed that EB sterilization produces degradation products in the COP main chain and reduces the quantity of the antioxidants in the COP resin. ESR spectra of the EB‐sterilized syringe barrels indicated the presence and location of alkyl radicals, which were generated in the COP main chain by EB sterilization. ESR analyses also indicated that the quantity of alkyl radicals decreased over time. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43498.     

Formation Processes of β-C2S by the Decomposition of Hydrothermally Prepared C-S-H with Ca(OH)2

A mixture of CaO and silicic acid prepared with a Ca/Si ratio of 2.0 was hydrothermally synthesized at 80° to 200°C, and the thermal decomposition behavior of the products (C-S-H with Ca(OH)₂) was analyzed using XRD, ²⁹Si MAS NMR, and the trimethylsililation method (TMS). It was found that the main silicate anion structure of C-S-H was a mixture of a dimer and a single-chain polymer (larger than Si₅O₁₆) and that polymerization advanced with an increase of the synthesizing temperature. On heating, the products decomposed to form β-C₂S. It was found that the decomposition was gradual and that the-higher the temperature of hydrothermal synthesis, the lower was the temperature of the decomposition into β-C₂S. Although the decomposition proceeded to form a monomer (β-C₂S) from the polymer and dimer, this dimer was resistant to heat and did not decompose unless heated to above 400°C.     

Characterization of Acetylxylan Esterase from White-Rot Fungus Irpex lacteus

The carbohydrate esterase family 1 (CE1) in CAZy contains acetylxylan esterases (AXEs) and feruloyl esterases (FAEs). Here we cloned a gene coding for an AXE belonging to CE1 from Irpex lacteus (IlAXE1). IlAXE1 was heterologously expressed in Pichia pastoris, and the recombinant enzyme was purified and characterized. IlAXE1 hydrolyzed p-nitrophenyl acetate, α-naphthyl acetate and 4-methylumbelliferyl acetate, however, it did not show any activity on ethyl ferulate and methyl p-coumarate. We also examined the activity on partially acetylated and feruloylated xylan extracted from corncob by hydrothermal reaction. Similarly, ferulic and p-coumaric acids were not liberated, and acetic acid was only detected in the reaction mixture. The results indicated that IlAXE1 is an acetylxylan esterase actually reacted to acetyl xylan. However, since IlAXE1 was unable to completely release acetic acid esterifying xylopyranosyl residues, it is assumed that acetyl groups exhibiting resistance to deacetylation by IlAXE1 are present in corn cob xylan.     

Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.     

Carbon radicals generated by solid polymers: Electron spin resonance spectroscopy for detection of species in water

Radicals generated in plastic medical devices (solid phase) by γ-rays or electron-beam irradiation during sterilization are known to cause oxidation of protein drugs, resulting in a loss or reduction in drug efficacy. The generation of radical species in water by the radical species in solid polymers has not been proved. Using electron spin resonance (ESR) spectroscopy, we confirm the generation of new radicals in water by γ-ray irradiated cyclic olefin polymers (COP). ESR measurements are obtained using 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL) as a spin probe and 5-(2,2-dimethyl-1,3-propoxycyclophosphoryl)-5-methyl-1-pyrroline N-oxide (CYPMPO) as a spin trap, in which the irradiated COP was immersed. The ESR signals indicate the TEMPOL radicals decline over time, suggesting the generation of new radicals. Conversely, the characteristic ESR signals of the adduct formed by the reaction between CYPMPO and the hydroxyl radical are observed. Thus, hydroxyl radicals are generated because of the migration of the radicals from COP to water. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48604.