A family of infantile genetic agranulocytosis

A survey was performed of the mold flora in the air and on the surfaces inside twelve homes throughout four seasons. There were significant variations of the mold flora in homes associated with the outdoor spore count, various rooms, carpeting, central air-conditioning and pets. We conclude that homes may be a source of perennial mold exposure.     

Nonsolvent coal hydrogenation at short contact time

Yields and properties of products on hydrogenation of Japanese and Australian coals have been studied using an autoclave equipped with a magnedrive device at temperatures of 500–600 °C and hydrogen pressure 4.9–14.7 MPa (gauge) in the absence of solvent. Optimum contact time, at which maximum extraction yield was observed, shifted from 15 s to a few seconds with increasing reaction temperature and hydrogen pressure. The extracts derived from both coals reveal similar structural parameters.     

Rapid Testing for Noise Immunity of Electron Devices

Current switching in power control devices sometimes has serious noise difficulties. This paper presents a method of testing and measuring noise immunity. The noise immunity of a thyristor with magnetic core or unijunction transistor is analyzed and measured. The experiment agrees well with the theory.     

Effect of dispersed oxides of rare earths and other reactive elements on the high temperature oxidation resistance of Fe-20Cr alloy

The isothermal oxidation resistance in air at 1273, 1323, and 1373 K of Fe-20Cr alloys with 1 wt pct dispersoid of Y₂0₃, La₂O₃, A1₂O₃, TiO₂, SiO₂, Cr₂O₃ and without dispersoid prepared by a conventional sintering and rolling procedures was examined. It was found that SiO₂ dispersoid reduced, while A1₂O₃ dispersoid slightly increased the oxidation resistance. The dispersoids of TiO₂ and Cr₂O₃ showed no beneficial effect on the oxidation resistance except for the oxidation after 10 h at 1373 K. The oxidation behavior after 10 h at 1373 K was rather complex including accelerated oxidation. The beneficial effect of La₂O₃ and Y₂O₃ dispersoids was excellent at all temperatures. The oxidation rates during the early stage of oxidation for the alloys with dispersoid were apparently dependent on the type of the dispersoid. There was no evidence that dispersoid accumulated at the scale-alloy interface. Comparison of results obtained for the oxidation of the alloys prepared by a powder metallurgical procedure with results for the alloys by arc-melting procedure indicated that the grain size of the alloy is an important factor for reduction of oxidation rate but does not seem to be critical, because the grain size of the alloys with dispersoid was not dependent on the type of the dispersoid. Ion Microanalyses of the Cr₂O₃ scale formed after 1 h oxidation at 1373 K showed an interesting feature in that all the dispersed elements were incorporated in the scale and the iron content of the scale was lower on the alloys which exhibited better oxidation resistance.     

Solid-state microwave relay systems in Japan

In response to the rapidly increasing demand for communication facilities, microwave relay systems have played an important role in Japan's telecommunications network because of their economy and capability for broadband transmission. Their progress has been marked during the past 20 years and this development has been supported by advances in such diverse fields as radio propagation, antennas, microwave and electronic circuitry, electron devices, and, particularly, in solid-state techniques. This article reviews the history of microwave relay systems and describes the past and expected future contributions of the solid-state technology to these systems.     

Noncompetitive inhibition by L-cysteine and activation by L-glutamate of the iron-oxidizing activity of a mixotrophic iron-oxidizing bacterium strain OKM-9

A mesophilic, mixotrophic iron-oxidizing bacterium strain OKM-9 uses ferrous iron as a sole source of energy and L-glutamate as a sole source of cellular carbon. Uptake of L-glutamate into OKM-9 cells is absolutely dependent on ferrous iron oxidation. Thus, the Fe(2+)-dependent L-glutamate uptake system of strain OKM-9 is crucial for the bacterium to grow mixotrophically in iron medium with L-glutamate. The relationship between iron oxidation and L-glutamate transport activities was studied. Iron oxidase containing cytochrome a was purified 9-fold from the plasma membrane of OKM-9. A purified iron oxidase showed one rust-colored band following disc gel electrophoresis after incubation with Fe(2+). The Fe(2+)-dependent L-glutamate transport system was also purified 14.5-fold from the plasma membrane using the same purification steps as for iron oxidase. Fe(2+)-dependent L-glutamate and L-cysteine uptake activities of OKM-9 were 0.36 and 0.24 nmol/mg/min, respectively, when a concentration of 18 mM of these amino acids was used as a substrate. Both uptake activities were completely inhibited by potassium cyanide (KCN), suggesting that cytochrome a in the iron oxidase is involved in the transport process. The iron-oxidizing activity of strain OKM-9 was activated 1.7-fold by 80 mM L-glutamate. In contrast, the activity was noncompetitively inhibited by L-cysteine. The Michaelis constant of iron oxidase for Fe(2+) was 12.6 mM and the inhibition constant for L-cysteine was 41.6 mM. A marked inhibition of iron oxidase by 50 mM L-cysteine was completely reversed by the addition of 60 mM L-glutamate. The results suggest the possibility that iron oxidase has a binding site for L-cysteine and the cysteine first bound to the iron oxidase was replaced by the added L-glutamate.     

Reconstruction of a high-resolution image on a compound-eye image-capturing system

The authors have proposed an architecture for a compact image-capturing system called TOMBO (thin observation module by bound optics), which uses compound-eye imaging for a compact hardware configuration [Appl. Opt. 40, 1806 (2001)]. The captured compound image is decomposed into a set of unit images, then the pixels in the unit images are processed with digital processing to retrieve the target image. A new method for high-resolution image reconstruction, called a pixel rearrange method, is proposed. The relation between the target object and the captured signals is estimated and utilized to rearrange the original pixel information. Experimental results show the effectiveness of the proposed method. In the experimental TOMBO system, the resolution obtained is four times higher than that of the unit image that did not undergo reconstruction processing.     

Cathodoluminescence study of AlGaAs/GaAs multilayers grown on ridge-type triangles on GaAs (111)A substrates

We have studied the cathodoluminescence of AlxGa1-xAs/GaAs multilayers grown on ridge-type triangles by molecular beam epitaxy. The compositional variation of Al, as well as the distribution of impurity and/or defect, was revealed by variations in the cathodoluminescence spectra and images. The Al composition in an AlxGa1-xAs layer was highest in the (111)A facet and decreased in the order (100), (411)A, (111)-delta and (110) facets. On the other hand, the carbon concentration was highest in the (411)A facet and decreased in the order (111)A, (111)-delta, (100) and (110) facets. It should be noted that the (111)-delta facet has a significant effect on the redistribution of Al. Although our ridge-type triangles are rather large for the quantum structures, these data have elucidated the self-organization mechanism of the AlxGa1-xAs/GaAs system and have yielded information on the design of quantum structures. We conclude that cathodoluminescence observation is a powerful tool for studying the compositional variation or band structure of three-dimensional microscale or nanoscale construction.     

A Passive UHF RF Identification CMOS Tag IC Using Ferroelectric RAM in 0.35-μm Technology

A passive UHF RF identification (RFID) tag IC with embedded 2-KB ferroelectric RAM (FeRAM) for rewritable applications enables a 2.9 times faster read-and-write transaction time over EEPROM-based tag ICs. The resulting FeRAM-based tag has a nominally identical communication range for both read and write operations, which is indispensable for data write applications. The evaluated tag communication range with a folded dipole antenna is from 0 m to 4.3 m, at the 953-MHz carrier frequency with 4-W transmitting Effective Isotropic Radiated Power (EIRP) from a reader/writer. The developed tag IC features two circuit blocks to maximize the communication range in 0.35-mum CMOS/FeRAM technology. First is a CMOS-only full-wave rectifier, which can improve the measured efficiency by up to 36.6% by reducing the input parasitic capacitances and optimization of multiplier structure. This efficiency is more than twice that of previously-published results. Second is a low-voltage current-mode ASK demodulator to accommodate a low-breakdown voltage of FeRAM, which converts the ASK power modulation into a linearly modulated current over an incoming power range of 27 dB, corresponding to the entire communication range. The developed demodulator can thus resolve the primary design tradeoff issue between device protection and detection sensitivity in the conventional voltage-mode demodulator     

Hydrocracking of diphenylmethane and tetralin over bifunctional NiW sulfide catalysts supported on three kinds of zeolites

Hydrocracking reactions of diphenylmethane and tetralin were carried out over three kinds of zeolites with or without NiW sulfide to discuss the roles of catalytic bifunctionality in two types of hydrocracking reactions. It was found that strong acid sites were not needed for the hydrocracking of diphenylmethane, while the conversion of tetralin required relatively strong acid sites. Ultra-stable Y zeolite with strong acidity exhibited high hydrocracking activity for both reactions. In contrast, mordenite catalysts did not show high activity for either hydrocracking, though isomerization of tetralin and excess hydrocracking to gaseous products proceeded. The superior performances of ultra-stable Y zeolite in the tetralin hydrocracking were suggested to be related to the hydrogen transfer ability. In most cases, the loading of NiW sulfide enhanced catalytic activity. In the diphenylmethane hydrocracking, the role of NiW sulfide was found to supply active hydrogen to the hydrocracking active sites on zeolite and to prevent polymerization of benzyl cations. In the tetralin hydrocracking, the dehydrogenated products from tetralin were re-hydrogenated over NiW sulfide.