A study of hypervelocity impact on cryogenic materials

This paper reports a result of hypervelocity impact experiments on cryogenically cooled aluminum alloys and a composite material. Experiments are carried out on a target palate at 122 K. Aluminum spheres at 1.95 km/s in 50 kPa air were impinged against the target plate at cryogenic temperature and the result was compared with room temperature target plates. Hypervelocity impact (HVI) processes were visualized with shadowgraph arrangement and recorded with high-speed video camera and to ensure the temperature dependence we compared HVI tests with metal target plates with AUTODYN 2D and SPH numerical simulations. We found that cryogenic impacts created slight differences of impact damage from room temperature ones, i.e., the shape and averaged diameters of HVI crater holes were less at cryogenic impacts.     

Thermodynamic evaluation of the phase equilibria and glass-forming ability of the Fe–Si–B system

A thermodynamic study has been carried out on the Fe–Si–B ternary system, which is important in the development of transformer core materials and Ni-based filler metals. A regular solution approximation based on the sublattice model was adopted to describe the Gibbs energy for the individual phases in the binary and ternary systems. Thermodynamic parameters for each phase were evaluated by combining the experimental results from differential scanning calorimetry with literature data. The evaluated parameters enabled us to obtain reproducible calculations of the isothermal and vertical section diagrams. Furthermore, the glass-forming ability of this ternary alloy was evaluated by introducing thermodynamic quantities obtained from the phase diagram calculations into Davies–Uhlmann kinetic formulations. In this evaluation, the time–temperature-transformation (TTT) curves were obtained, which are a measure of the time required to transform to the minimum detectable mass of crystal as a function of temperature. The critical cooling rates calculated on the basis of the TTT curves enabled us to evaluate the glass-forming ability of this ternary alloy. The results show good agreement with the experimental data in the compositional amorphization range.     

Transmission electron microscope observation of organic–inorganic hybrid thin active layers of light-emitting diodes

Low-resistivity indium tin oxide [ITO] film was successfully deposited on oxygen plasma-treated polyethylene terephthalate [PET] surfaces at room temperature. X-ray diffraction [XRD] measurements demonstrated that the film deposited on the PET surface that had not been treated with oxygen plasma had an amorphous structure. In contrast, after the low-power oxygen plasma treatment of the PET surface, the ITO film deposited on the PET surface had a poly-crystalline structure due to interactions between electric dipoles on the PET surface and electric dipoles in the ITO film. The minimum resistivity of the poly-crystalline ITO was about 3.6 times lower than that of the amorphous ITO film. In addition, we found that the resistivity of ITO film is proportional to the intensity of the (400) line in the film's XRD spectra.     

A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.     

A study on physical and mechanical properties for soft to firm clays in Yangon area – Properties of clays deposit at the sedimentary basins in Myanmar

Recently, a great deal of foreign investment has been entered into construction of the social infrastructure of Myanmar. Many construction projects are therefore on-going, and these are especially planned in the Yangon area. While these construction booms are increasing, existing studies on the geotechnical problems in the Yangon area such as problematic soils like soft clays are limited at present. Information on soil properties has also not been shared and has been confined to individual projects. In this paper, the boring and laboratory tests carried out in the Yangon area are selected and focused upon among the tests carried out in Myanmar. Laboratory test results for clay deposits in the Yangon area are analyzed and the differences in soil properties between different sedimentary basins and sub-areas divided by the Tertiary sediment ridge that runs from north to south at the center of Yangon are clarified together with a comparison to the clays found in other countries, which have been previously investigated.     

Pyrolysis Products of Lignin in Open and Sealed Vessels Studied by Py-GC-MS

The pyrolysis products of lignin in open and sealed vessels were studied by pyrolysis—gas chromatography—mass spectrometry (Py-GC-MS). Several kinds of phenolic derivatives were observed in the pyrolysates in both treatments, while phenolic compounds with alkenyl or acetyl groups had higher relative contents in the open vessel than those in the sealed vessel. Phenol and its alkyl or mono-methoxy substituted derivatives become the main pyrolysis products in the sealed vessel. Most of the lignin pyrolysis products in the open vessel could be detected by Py-GC-MS, but some active products would go through further reaction in the sealed vessel.     

Guiding and blocking of highly charged ions through a single glass capillary

Highly charged ions produced in an electron beam ion trap, I^q+, q = 10-50, were transmitted through a tapered glass capillary having diameter of at the end. We found that for a particular beam current, there exists an optimum tilting angle of the capillary in which a steady output of ions is observed, while for smaller angles, the ion counts first rise, then gradually decay on a time scale of minutes. In the case of steady transmission, the charge state distribution is found to be slightly towards the lower side.     

InxGa1−xAs ohmic contacts to n-type GaAs with a tungsten nitride barrier

Significant reduction of the contact resistance of In_0.7Ga_0.3As/Ni/W contacts (which were previously developed by sputtering in our laboratory) was achieved by depositing a W₂N barrier layer between the Ni layer and W layer. The In_0.7Ga_0.3 As/Ni/W₂N/W contact prepared by the radio-frequency sputtering technique showed the lowest contact resistance of 0.2 Ωmm after annealing at 550°C for 10 s. This contact also provided a smooth surface, good reproducibility, and excellent thermal stability at 400°C. The polycrystalline W₂N layer was found to suppress the In diffusion to the contact surface, leading to improvement of the surface morphology and an increase in the total area of the In_xGa−As between metal and the GaAs substrate. These improvements are believed to reduce the contact resistance.     

Strain rate effects on viscoelastic crack bifurcation

The effects of applied strain rate on the viscoelastic crack bifurcation phenomenon in Polymethyl Methacrylate (PMMA) were investigated. It was still verified that the product $\text{σ}{}_{\mathrm{f}}\text{C}{}_{\mathrm{b}}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ was constant, as was already observed by Congleton and Petch, and Anthony, Chubb and Congleton, for brittle elastic materials, for any strain rate, where σ_f = the gross fracture stress and C_b= the main crack length until the bifurcation starts. However, it was found that the higher strain rate increases the main crack length C_b resulting in the decrease in the gross fracture stress σ_f and vice versa. This might be interpreted that the higher stress concentration at the initiation crack tip, which is realized by becoming more brittle due to the higher strain rate owing to the predominance of the elastic element in the viscoelastic material, decreases the gross fracture stress leading to the longer main crack length.