Synthesis of optical quality ZnO nanowires utilizing ultrasonic spray pyrolysis

ZnO nanowires were grown by an ultrasonic spray pyrolysis technique. The aspect ratio and size of the wire were dependent mainly on the pH value of a precursor solution and the growth temperature. By high-resolution transmission electron microscopic analysis and photoluminescence measurements, it was confirmed that the nanowires are monocrystalline with good optical quality.     

Microstructure of a Molybdenum Nitride Layer Formed by Nitriding Molybdenum Metal

For pure molybdenum nitrided at 1373 K in NH₃ gas, microstructural observations of a molybdenum nitride layer were conducted through a transmission electron microscope. The molybdenum nitride layer consisted of two molybdenum nitrides: an outer one of γ-Mo₂N and an inner one of β-Mo₂N. A great number of (011)[0     1] type twins were observed in the β-Mo₂N phase, whereas the microstructure of the γ-Mo₂N phase was almost free from lattice defects except for slightly observed {111}〈112〉 type twin.     

Liquid lithium divertor system for fusion reactor

One of the most critical issues for the steady state fusion reactor is the heat flux in the divertor target. This paper proposes a liquid lithium divertor system to solve this problem. The proposed divertor system consists of a liquid lithium target, an evaporation chamber and a differential evacuation chamber. The heat coming from the fusion plasma along the divertor leg is removed by evaporation of lithium. The lithium vapor is condensed on the wall and is circulated with a pump. The coolant temperature for the wall is high enough to drive a power generator. Narrow slits along the divertor leg and the differential evacuation chamber reduce leakage of lithium vapor to the plasma chamber. A preliminary estimation predicts that the lithium ion density in the core plasma is lower than the plasma density.     

Calcium oxide/carbon dioxide reactivity in a packed bed reactor of a chemical heat pump for high-temperature gas reactors

The thermal performance of a chemical heat pump that uses a calcium oxide/carbon dioxide reaction system was discussed as a heat storage system for utilizing heat output from high temperature gas reactors (HTGR). Calcium oxide/carbon dioxide reactivity for the heat pump was measured using a packed bed reactor containing 1.0 kg of reactant. The reactor was capable of storing heat at 900 °C by decarbonation of calcium carbonate and generating up to 997 °C by carbonation of calcium oxide. The amount of stored heat in the reactor was 800–900 kJ kg⁻¹. The output temperature of the reactor could be controlled by regulating the carbonation pressure. The thermal storage performance of the reactor was superior to that of conventional sensible heat storage systems. A heat pump using this CaO/CO₂ reactor is expected to contribute to thermal load leveling and to realize highly efficient utilization of HTGR output due to the high heat storage density and high-quality temperature output of the heat pump.     

Implementation of Fault-Tolerant GridRPC Applications

A task parallel application is implemented with Ninf-G, a GridRPC system. A series of experiments are conducted on the Grid testbed in Asia Pacific for three months. Through tens of long executions, typical fault patterns were collected, and instability of the network throughput was determined to be a major reason of the faults. Several important points are stressed to avoid task throughput decline due to the fault-recovery operations: Timeout minimization for fault detection, background recovery, redundant task assignments, and so on. This study also issues a steer for design of the automated fault-tolerant mechanism in an upper layer of the GridRPC framework.     

Preparation of Lanthanum Nickel Oxide-Coated Ni Sheet Anodes and Their Application to Electrolytic Production of (CF3)3N in (CH3)4NF·4.0HF Melt

A new process for electrolytic production of a perfluorinated compound, (CF₃)₃N, using lanthanum nickel oxide-coated Ni sheet anode in the (CH₃)₄NF·4.0HF melt at room temperature, was developed. Thin films of the lanthanum nickel oxides were prepared on Ni sheets by sol-gel coating method using polyvinlylpyrrolidone(PVP). The main components of the thin films were La₂O₃, LaNiO₃, and La₂NiO₄ at 500, 750 and 1000 °C, respectively. The anode performance in the (CH₃)₄NF·4.0HF melt depends greatly on the main component of the thin film, and the LaNiO₃-coated Ni sheet anode gives the best anode performance. The potential of LaNiO₃-coated Ni sheet anode remains constant at 5.9 V during electrolysis at 20 mA·cm⁻² in the (CH₃)4NF·4.0HF melt for 100 h. This is because LaNiO₃ and NiF₃, and/or Ni₂F₅, the latter of which was formed during electrolysis, in the film give a high electronic conductivity to the surface film during electrolysis. The maximum mole fraction of (CF₃)₃N (21.4%) was obtained at 20 mA·cm⁻² in (CH₃)₄NF·4.0HF melt using the LaNiO₃-coated Ni sheet.     

采用TAB快速测定EMD性能

TAB(聚四氟乙烯乙炔黑)是好的导电和粘结合二为一的材料,采用该材料能快速评定EMD的性能。     

Reliable indirect competitive ELISA used for a survey of ochratoxin A in green coffee from the North of Paraná State, Brazil.

The performance of an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a monoclonal antibody (mAb) for ochratoxin A (OTA) detection was evaluated in a comparative study with high-performance liquid chromatography (HPLC) analysis using 68 freshly harvested coffee samples from the North of Paraná State, Brazil. The anti-OTA mAb showed high specificity and low cross-reactivity with OTA analogues (OTB and OTalpha), but cross-reacted with OTC. This ic-ELISA showed a detection limit of 3.75 ngg-1 sample, when compared to 0.80 ngg-1 by HPLC, with an ic-ELISA/HPLC correlation coefficient of 0.90. As regards OTA analysis of these coffee samples, natural contamination was detected in 10 samples (14.7%) by both methods, where the ic-ELISA values (range 3.9-7.3 ngg-1) were 1.1 to 1.6-fold higher than HPLC data (2.7-4.7 ngg-1). Five samples (7.4%) were OTA positive (range 0.84-1.30 ngg-1) only by HPLC assay, probably due to the higher detection limit reached by ic-ELISA. OTA was undetectable in 53 samples (77.9%) by both methods, while all positive samples (range 0.84-7.30 ngg-1) showed OTA levels lower than 8 ngg-1 (maximum limit recommended by the European Union). The matrix interference of green coffee was minimized by dilution of sample extracts before carrying out the ELISA assay. This mAb-based ic-ELISA can be effectively applied for OTA screening in coffee, because it is simple, sensitive and sample preparation is easy.     

Measurement and correlation of mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems

The mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems were measured using a sorption apparatus with a quartz spring at 100 and 130°C for mass fractions of n-nonane ranging from 0 to 0.16. The mutual diffusion coefficients were correlated with good agreement by the free-volume theory.