Micro Textures in Concentrated-Conformal-Contact Lubrication: Effect of Distribution Patterns

Micro-scale textures may be engineered into surfaces for lubrication performance improvement. It is expected that a carefully chosen texture helps retain lubricant and enhances the hydrodynamic effect at the interface. The concept of model-based virtual texturing enables textured surfaces to be generated and “tested” through numerical simulations. This paper reports virtual texturing and simulation of a group of textured surfaces in a lubricated concentrated contact. The focus of the study is on the selection of texture distribution patterns based on their lubrication performance. Patterns of fishbone, sinusoidal, triangular, and honeycomb distributions have been investigated. The effects of texture direction, orientation angle, feature continuity, and aspect ratio are also studied. The results indicate that, for the given material and geometry system under the given conditions in the present work, the textures generating the strongest hydrodynamic lifting are short grooves with a small aspect ratio and sinusoidal waves of a small wavelength/amplitude ratio propagating in the motion direction.     

Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.     

Effects of ship motions on natural circulation of deep sea research reactor DRX

DRX is a very small integral type PWR (750 kW_t) for a scientific deep-sea research bathyscaph. The core having a small amount of steam is cooled by natural circulation and pressurized by self-pressurization. During operation of the bathyscaph in a deep sea or near the water surface, a ship inclination or ship motions will affect the reactor behavior. This paper describes the effect of a heeling or a heaving on the thermal hydraulic behavior of reactor system, which is analyzed by improved so to simulate the effect of ship motions. The dynamics has a feature of nuclear power-natural circulation flow coupling under the condition of external forces. The analysis shows that ship inclination induces the core flow to decrease but reactor power recovers to the initial level without help of the reactor automatic control system. The heaving makes the core flow and the reactor power oscillate in phase with heaving, which are different from a density wave oscillation. Oscillation amplitudes of the flow and the power have peaks at the heaving period of 5 s. The peaks are due to resonance of the natural circulation flow and the heaving. An effective measure to suppress this oscillations due to heaving is to pressurize the primary loop by filling non-condensable gas. The density wave oscillation occurs when the reactor power increases over the rated power, and the boundary of its occurrence is analytically revealed. Under the condition of both density wave oscillation and heaving, the system shows to oscillate with the overlapped effect.     

The distributed constraint satisfaction problem: formalization andalgorithms

We develop a formalism called a distributed constraint satisfaction problem (distributed CSP) and algorithms for solving distributed CSPs. A distributed CSP is a constraint satisfaction problem in which variables and constraints are distributed among multiple agents. Various application problems in distributed artificial intelligence can be formalized as distributed CSPs. We present our newly developed technique called asynchronous backtracking that allows agents to act asynchronously and concurrently without any global control, while guaranteeing the completeness of the algorithm. Furthermore, we describe how the asynchronous backtracking algorithm can be modified into a more efficient algorithm called an asynchronous weak-commitment search, which can revise a bad decision without exhaustive search by changing the priority order of agents dynamically. The experimental results on various example problems show that the asynchronous weak-commitment search algorithm is, by far more, efficient than the asynchronous backtracking algorithm and can solve fairly large-scale problems     

Implementation of a decision support system using an interactive large-scale high-resolution display

In this research, we propose and evaluate a decision support system using an interactive large-scale high-resolution display. This decision support system supports the summarization and decision-making of a large amount of disaster information during the occurrence of a large-scale natural disaster. Municipal employees at the disaster control headquarters can display disaster information on the large-scale display with a touch or flick on a laptop or tablet. To evaluate the operability, readability, functionality, and necessity of the decision support system, we surveyed 23 municipal employees in the disaster prevention division using a questionnaire. The system received a great evaluation in all the evaluation items.     

Effects of ageing on bainitic and thermally induced martensitic transformations in ductile Cu–Al–Mn-based shape memory alloys

The effects of ageing at 473–573 K on the hardness, microstructure and thermoelastic martensitic transformation in Cu–Al–Mn-based shape memory alloys were investigated. It was found that hardness was dramatically increased by ageing due to the formation of fine bainitic plates and that the volume fraction of the bainite phase with ageing time can be described by the Austin–Rickett equation. The martensitic transformation temperatures decreased with the formation of bainite plates, mainly due to the composition change of the β-matrix. Moreover, the growth of thermally induced martensite plates was disturbed by the existence of bainite plates. Consequently, the transformation intervals (M_s–M_f and A_f–A_s) and transformation hystereses (A_f–M_s and A_s–M_f) increased with the progress of bainitic transformation.     

Poly(L‐lactide). X. Enhanced surface hydrophilicity and chain‐scission mechanisms of poly(L‐lactide) film in enzymatic,alkaline, and phosphate‐buffered solutions

Attempts were carried out to enhance the surface hydrophilicity of poly(L ‐lactide), that is, poly(L ‐lactic acid) (PLLA) film, utilizing enzymatic, alkaline, and autocatalytic hydrolyses in a proteinase K/Tris–HCL buffered solution system (37°C), in a 0.01N NaOH solution (37°C), and in a phosphate‐buffered solution (100°C), respectively. Moreover, its chain‐scission mechanisms in these different media were studied. The advancing contact‐angle (θ_a) value of the amorphous‐made PLLA film decreased monotonically with the hydrolysis time from 100° to 75° and 80° without a significant molecular weight decrease, when enzymatic and alkaline hydrolyses were continued for 60 min and 8 h, respectively. In contrast, a negligible change in the θ_a value was observed for the PLLA films even after the autocatalytic hydrolysis was continured for 16 h, when their bulk M_n decreased from 1.2 × 10⁵ to 2.2 × 10⁴ g mol^?1 or the number of hydrophilic terminal groups per unit weight increased from 1.7 × 10^?5 to 9.1 × 10^?5 mol g^?1. These findings, together with the result of gravimetry, revealed that the enzymatic and alkaline hydrolyses are powerful enough to enhance the practical surface hydrophilicity of the PLLA films because of their surface‐erosion mechanisms and that its practical surface hydrophilicity is controllable by varying the hydrolysis time. Moreover, autocatalytic hydrolysis is inappropriate to enhance the surface hydrophilicity, because of its bulk‐erosion mechanism. Alkaline hydrolysis is the best to enhance the hydrophilicity of the PLLA films without hydrolysis of the film cores, while the enzymatic hydrolysis is appropriate and inappropriate to enhance the surface hydrophilicity of bulky and thin PLLA materials, respectively, because a significant weight loss occurs before saturation of θ_a value. The changes in the weight loss and θ_a values during hydrolysis showed that exo chain scission as well as endo chain scission occurs in the presence of proteinase K, while in the alkaline and phosphate‐buffered solutions, hydrolysis proceeds via endo chain scission. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1628–1633, 2003     

An empirical approach for structure-based prediction of carbohydrate-binding sites on proteins

A computer program system was developed to predict carbohydrate-bindingsites on three-dimensional (3D) protein structures. The programssearch for binding sites by referring to the empirical rulesderived from the known 3D structures of carbohydrate–proteincomplexes. A total of 80 non-redundant carbohydrate–proteincomplex structures were selected from the Protein Data Bankfor the empirical rule construction. The performance of theprediction system was tested on 50 known complex structuresto determine whether the system could detect the known bindingsites. The known monosaccharide-binding sites were detectedamong the best three predictions in 59% of the cases, whichcovered 69% of the polysaccharide-binding sites in the targetproteins, when the performance was evaluated by the overlapbetween residue patches of predicted and known binding sites. Received April 24, 2003; revised June 2, 2003; accepted June 10, 2003.     

The flow of solid particles in an aerated inclined channel

The dynamic behavior of the flow of solid particles in an inclined open channel with air flow introduced through a porous base plate was examined. The solid particle velocity distributions were measured in detail using an optical probe.Five types of flow patterns were found depending on the air velocity and the slope of the channel. They were: sliding flow, immature sliding flow, splashing flow, bubbling flow, and gliding flow. The first two could be observed when the air velocity was less than the minimum fluidization velocity, U_mf, for the particles. The last two were observed when it became higher than U_mf. Splashing flow occurred when the slope of the channel was steep.