Chemical speciation of chlorine in particulate matter by wavelength-dispersive PIXE technique

Chemical speciation of chlorine (Cl) in atmospheric particulate matter (APM) was performed by using a wavelength-dispersive PIXE spectrograph based on high-resolution measurement of Cl-Kβ emission. Samples of atmospheric particles were size-fractioned and collected by a cascade impactor at an urban area in Tokyo. The target position with respect to the spectrograph was precisely adjusted by a 2D laser displacement sensor to achieve high detection efficiency. The samples were irradiated with 2 MeV protons from a tandem electrostatic accelerator. The beam current was 300-500 nA. During the irradiation, the target was cooled by liquid nitrogen to avoid the evaporation of volatile Cl compounds. The measured spectra for the NaCl standard samples clearly showed the Cl-Kβ series composed of the Kβ₁ and the satellite Kβ_x, Kβ₅ lines. From the measured X-ray yields, it was found that the chemical speciation of samples with Cl concentrations as low as ≈1% is possible by this method. The Cl-Kβ series were also successfully observed in the case of APM samples with particle sizes of 11.0-2.1 μm. The spectra shapes of the NaCl standard samples and an APM sample were slightly different from each other, because of some possible mixing of non-sea salt component in the APM sample.     

Speed-up of computing time for numerical analysis of particle charging process by using discrete element method

The objective of this paper is to improve the computing time for numerical analysis of particle charging process by using discrete element method. The rule for ignoring the calculations of contact forces and updating trajectories of unmoved particles were discussed. When the relative displacement of a particle within certain calculation steps became less than 0.1% of particle radius, this particle was determined to be unmoved and the calculations of this particle were ignored. The computing time was improved significantly when this new method was used, and its calculation speed was more than two times faster than that of original. It was found that this speed-up method is more useful for the cases that the particle becomes unmoved in short time or the height of charged bed is large. The simulation of charging process in an industrial-scale surge hopper was studied by using new method, the calculation speed became 2.88 times faster than that of original, and the quite similar particle size segregation between original and new methods was given. This new method for speed-up of the charging process in DEM is very useful, and the charging processes of the industrial scale storages can be simulated by using this method.     

Effects of Fruiting Bodies of Basidiomycetes on Yeast Growth Rates

The effects of edible fruiting of Basidiomycetes on growth of Saccharomyces cerevisiae and other yeast strains were examined. The growth rates were significantly increased in the presence of fruiting bodies but there was no significant difference growth yield between cultures with and without fruiting bodies. Growth rates of yeast cells were promoted in both synthetic and natural media.     

Tubulin Photoaffinity Labeling with Biotin‐Tagged Derivatives of Potent Diketopiperazine Antimicrotubule Agents

NPI‐2358 ( 1 ) is a potent antimicrotubule agent that was developed from a natural diketopiperazine, phenylahistin, which is currently in Phase I clinical trials as an anticancer drug. To understand the precise recognition mechanism of tubulin by this agent, we focused on its potent derivative, KPU‐244 ( 2 ), which has been modified with a photoreactive benzophenone structure, and biotin‐tagged KPU‐244 derivatives ( 3 and 4 ), which were designed and synthesized for tubulin photoaffinity labeling. Introduction of the biotin structure at the p′‐position of the benzophenone ring in 2 exhibited reduced, but significant biological activities with tubulin binding, tubulin depolymerization and cytotoxicity in comparison to the parent KPU‐244. Therefore, tubulin photoaffinity labeling studies of biotin‐derivatives 3 and 4 were performed by using Western blotting analysis after photoirradiation with 365 nm UV light. The results indicated that tubulin was covalently labeled by these biotin‐tagged photoprobes. The labeling of compound 4 was competitively inhibited by the addition of diketopiperazine 1 or colchicine, and weakly inhibited by the addition of vinblastine. The results suggest that photoaffinity probe 4 specifically recognizes tubulin at the same binding site as anticancer drug candidate 1 , and this leads to the disruption of microtubules. Probe 4 serves well as a useful chemical probe for potent antimicrotubule diketopiperazines, much like phenylahistin, and it also competes for the colchicine‐binding site.     

Joining of ADC12 and SS400 by means of friction stir welding

For conserving the earth's environment through the reduction of energy consumption in the field of transport machinery, reduction in weight is necessary and hence the application of light materials to structural members has been investigated. For the most representative example of transport machinery, it is highly likely that a variety of aluminium materials will be used for automobile bodies. However, since iron and steel materials are still used for the main part of the structure that requires high strength, joining of dissimilar metals, i.e. aluminium and iron and steel materials, is the new technical task in terms of reducing weight.     

Time dependent changes occurring in rat liver microsomes upon lipid peroxidation

Steady-state fluorescence anisotropy of diphenylhexatriene and n-(9-anthroyloxy)stearic acids (n=2,12) in rat liver microsomes showed a marked increase in the early stages of enzymatically or non-enzymatically induced lipid peroxidation. The changes in fluorescence anisotropy occurred in parallel with the formation of thiobarbituric acid-reactive substances (TBA-RS). Parallel to these changes, the fluorescence emitted from peroxidized microsomes increased markedly in the early stages of lipid peroxidation. In contrast to the changes in the fluorescence anisotropy and in the formation of TBA-RS, the fluorescence showed a continuing increase over the three hr period of lipid peroxidation. Glucose-6-phosphatase was inactivated in the early stages of lipid peroxidation, whereas NADH-cytochrome b₅ reductase underwent a slow deactivation over three hr. The apparently slow deactivation of the peripheral protein may be explained by the formation of fluorescent substances.     

Effect of Hypoxia on Pulmonary Endothelial Cells from Bleomycin-Induced Pulmonary Fibrosis Model Mice

Pulmonary fibrosis is a progressive and fatal disorder characterized by dysregulated repair after recurrent injury. Destruction of the lung architecture with excess extracellular matrix deposition induces respiratory failure with hypoxia and progressive dyspnea. The impact of hypoxia on pulmonary endothelial cells during pulmonary fibrogenesis is unclear. Using a magnetic-activated cell sorting system, pulmonary endothelial cells were isolated from a mouse model of pulmonary fibrosis induced by intratracheally administered bleomycin. When endothelial cells were exposed to hypoxic conditions, a hypoxia-inducible factor (HIF)-2α protein was detected in CD31- and α-smooth muscle actin (SMA)-positive cells. Levels of plasminogen activator inhibitor 1, von Willebrand factor, and matrix metalloproteinase 12 were increased in endothelial cells isolated from bleomycin-treated mice exposed to hypoxic conditions. When endothelial cells were cultured under hypoxic conditions, levels of fibrotic mediators, transforming growth factor-β and connective tissue growth factor, were elevated only in endothelial cells from bleomycin-treated and not from saline-treated lungs. The increased expression of α-SMA and mesenchymal markers and collagen production in bleomycin- or hypoxia-stimulated endothelial cells were further elevated in endothelial cells from bleomycin-treated mouse lungs cultured under hypoxic conditions. Exposure to hypoxia damaged endothelial cells and enhanced fibrogenesis-related damage in bleomycin-treated pulmonary endothelial cells.     

A Restart Control Method for Position Sensorless PMSM Drive Systems Without Potential Transformer for Railway Vehicle Traction

This paper proposes a restart control method for position sensorless PMSM drive systems without a potential transformer for railway vehicle traction. This method can estimate the initial rotor speed and position under coasting conditions over the entire speed range. The method can also be used when the back‐EMF voltage is higher than the inverter DC link voltage. The proposed method is verified by experiments using a 200‐kW PMSM.     

Crosslinking of PVC and NBR blends

The purpose of our work is to control the interfacial bonds between PVC and NBR using the ammonium salts of triazine thiols and dithiodimorpholine (DTDM) and thereby reveal the relation between the interfacial bonds and the final mechanical properties of products. In the experimental work a two-stage process was used. At first, an NBR/PVC blend was mixed with a mono-tetra-n-butylammonium salt of triazine trithiol at a temperature of 100°C on a two-roll mill to give the branching structure of triazine thiols into PVC. In the second stage branched NBR/PVC reacted with DTDM to afford the branched PVC containing trithiomorphonyl groups. In the presence of ZnO at 160°C trithiomorphonyl groups react with NBR to form a crosslinking structure between NBR and PVC. The mechanical properties of cured NBR/PVC blends were markedly improved by the treatment process and after addition of tetramethylthiuram monosulphide also. The mechanical properties were not improved by increasing the concentration of TT-TBA (tetrabutylammonium salt of 1,3,5-triazine-2,4,6-trithiol) over 4.2 phr.