Relationship between J-integral and averaged strain-energy density for U-notches in the case of large control volume under Mode I loading

The main purpose of this technical note is to present a relationship between J-integral and averaged strain-energy density () in U-notches under Mode I loading for brittle or quasi-brittle materials. In this work, control volume includes the rectilinear edge of the notch in addition to semi-circular arc of the notch root. A dimensionless function (f) between J and has been presented in this paper. Finite element analysis has been used for verification. It is found that this relationship is identical for tension or bending loading.     

Effect of growth parameters on the heteroepitaxy of 3C-SiC on 6H-SiC substrate by chemical vapor deposition

Epitaxial 3C-SiC(1 1 1) films were grown on 6H-SiC(0 0 0 1) Si face on axis substrates by chemical vapor deposition under H₂, SiH₄ and C₃H₈ in a cold wall vertical reactor. Two temperatures were studied (1450 and 1700 °C) with various C/Si ratio and deposition time. It was found that under conditions giving high lateral growth (low C/Si and/or high temperature), homoepitaxial growth occurred even at temperatures as low as 1450 °C. For other conditions, the 3C-SiC polytype was detected and always together with the formation of double positioning boundaries whose density was found to depend on the growth conditions but not on the initial surface reconstruction. Single domain enlargement was observed when growth was performed at 1700 °C over a nucleation layer grown at 1450 °C.     

Assessing critical functional and non-functional requirements for web-based procurement systems: a comprehensive survey

World Wide Web (WWW)-based electronic commerce has emerged as a mean to conduct business transactions that were previously handled through traditional interorganizational systems, phone, fax, on-site visits, or mail. Today, electronic procurement (e-procurement) accounts for most of the volume and value of the business transactions conducted over the Internet. As of yet, however, little or no research has assessed the functional and non-functional requirements sought for the WWW-based systems used to support the procurement process. This paper, presents findings of a survey of 133 corporate buyers from about 130 companies on the use of readily available web-based systems for business-to-business transactions and the requirements perceived to be critical to the effective support of supply chain operations.     

Modelling of the blend ratio effect on the mechanical properties of the biofibres

This work investigates the effect of the blend ratios of three different environmental-friendly biopolymers on fibres’ properties made by water bath extrusion machine and multi-stage drawing frame. Tensile test, shrinkage test, differential scanning calorimetry and scanning electron microscopy are used to study the mechanical and thermal properties of composed fibres. In the modelling stage, stepwise regressions were used as faster and less prone technique to over fit the results by watching the order in which blend ratios are increased or decreased, that help to meet the requirements of specific applications. The statistical-based models control the biodegradable fibre properties beyond the selected range of the blend ratios more than that can be obtained from single polymer equivalents. The forecasting designed program simulates the relationship between the blend ratios and the biofibre’ properties to save both time and cost of the production process, this novel method steps could be applied on different polymers.     

Development of Emu oil-loaded PCL/collagen bioactive nanofibers for proliferation and stemness preservation of human adipose-derived stem cells: possible application in regenerative medicine

Adipose tissue-derived stem cells (ASCs) are promising candidate in stem cell therapies, and maintaining their stemness potential is vital to achieve effective treatment. Natural-based scaffolds have been recently attracted increasing attention in nanomedicine and drug delivery. In the present study, a polymeric nanofibrous scaffold was developed based on the polycaprolactone/Collagen (PCL/Coll) containing Emu oil as a bioactive material to induce the proliferation of ASCs, while simultaneously preserving the stemness property of those cells. Fabrication of the electrospun Emu oil-loaded PCL/Coll nanofibers was confirmed by using FE-SEM, FTIR, and tensile test. ASCs were seeded on two types of nanofibers (PCL/Coll and Emu oil-loaded PCL/Coll) and their proliferation, cell cycle progression, and stemness gene expressions were evaluated using MTT, propidium iodide staining, and qPCR during 14?days, respectively. The results indicated that ASCs displayed improved adhesion capacity with the higher rates of bioactivity and proliferation on the Emu oil-loaded nanofibers than the other groups. The proliferation capacity of ASCs on Emu oil-loaded PCL/Coll nanofibers was further confirmed by the cell cycle progression analysis. It was also found that Emu oil-loaded nanofibers significantly up-regulated the expression of stemness markers including sox-2, nanog, oct4, klf4, and c-Myc. The results demonstrated that the nanofibers containing Emu oil can reinforce the cell adhesion and enhance ASCs proliferation while preserving their stemness; therefore, using scaffolds containing natural products may have a great potential to enhance the in vitro expansion capacity of ASCs in the field of stem cell therapy and regenerative medicine.     

A Reference Benchmark Solution for Free Convection in A Square Cavity Filled with A Heterogeneous Porous Medium

The Fourier-Galerkin (FG) method is used to produce a highly accurate solution for free convection in a square cavity filled with heterogeneous porous medium. To this end, the governing equations are reformulated in terms of the temperature and the stream function. These unknowns are then expanded in infinite Fourier series truncated at given orders. The accuracy of the FG solution is investigated for different truncation orders and compared to the results of an advanced finite-element numerical model using fine-mesh discretization. The obtained results represent a set of high-quality data that can be used for benchmarking numerical models.