Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO2 for no reduction by NH3

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO₂ for NO reduction by NH₃ was examined in a fixed-bed flow reactor. The deactivation of the catalyst was strongly dependent on reaction temperature. At high reaction temperatures over 300°C, the catalyst did not lose its initial activity up to 50 h of operation, regardless of SO₂ feed concentration from 500 to 20,000 ppm. However, at low reaction temperatures near 250°C, apparent deactivation did occur. Changes in the physicochemical properties such as surface area and sulfur content of deactivated catalyst well correlated with catalyst activity, depending upon reaction temperatures. The deactivation was due to pore blocking and/or filling by deactivating agents, which plugged and/or filled the pores of catalyst. The deactivating agents deposited on the catalyst surface were presumed to be (NH₄)₂SO₄ and/or (NH₄)HSO₄ from the results of TGA and ion-chromatography measurement.     

Metabolic changes in blood and liver of dairy cows during either feed restriction or administration of 1,3-butanediol.

Previous research has shown that a combination of feed restriction and dietary 1,3-butanediol starting at 14 d post-partum resulted in fatty liver and ketosis. Sixteen multiparous Holstein cows were used to determine effects of feed restriction or 1,3-butanediol as separate treatments. Treatments during d 14 to 42 postpartum were 1) control (ad libitum intake), 2) 20% feed restriction, or 3) control plus dietary 1,3-butanediol (5.5% of DM). From d 43 to 56, cows assigned to treatments 2 and 3 received a combination of feed restriction and butanediol. One cow on treatment 2 developed ketosis, but not fatty liver, after only 4 d of feed restriction. No other cows developed fatty liver or ketosis. Both treatments decreased milk production compared with controls. Feed restriction increased the extent of negative energy balance and caused transient increases in concentrations of NEFA, acetate, and beta-hydroxybutyrate in plasma. Concentrations of beta-hydroxybutyrate and insulin in plasma were increased by butanediol, which is a potent ketone body precursor. Concentration of glycogen in liver was less in feed-restricted cows, whereas glycogen and total lipid were greater in cows given butanediol separately. Gluconeogenic capacity of liver slices was not different among groups. Addition of 1,3-butanediol to in vitro incubation media decreased oxidation of propionate to CO2. Neither feed restriction nor dietary 1,3-butanediol as separate treatments induced the fatty liver and ketosis observed in earlier experiments in which the two treatments were given together.     

Monolithically integrated four-channel receiver array using diffused InGaAs (JFET technology)

Four-channel receiver arrays have been fabricated by monolithically integrating diffused InGaAs JFET-based electronics with InGaAs pin photodiodes. Cascode and simple inverter transimpedance amplifier circuits have been produced, both of which use a micro-FET as a tunable feedback element to vary bandwidth between 20 and 800 MHz. A sensitivity of -28.2 dBm was achieved at 1.25 Gbit/s with crosstalk between adjacent channels of -50 dB (electrical).<>     

Human gamma-interferon expression in the mammary gland of transgenic mice

Transgenic mice carrying a hybrid gene consisting of ovine beta-lactoglobulin gene sequences and human gamma-interferon (hIFN-g) cDNA were produced. hIFN-g expression in the mammary gland of two lactating transgenic founder females was found. The concentration of active hIFN-g in the milk was estimated as being ca. 1800 IU/ml. The hIFN-g ability to express in the mammary gland was found in the progeny of transgenic founder male.     

Structural properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 relaxor ferroelectric thin films on SrRuO3 conducting oxides

Coating of 0.65Pb(Mg_1/3Nb_2/3)O₃–0.35PbTiO₃ (PMN–PT) relaxor ferroelectrics by a sol–gel method is followed by growth of epitaxial SrRuO₃ (SRO) metallic oxide electrodes on SrTiO₃ (STO) single-crystal substrate by pulsed laser deposition. High-quality PMN–PT films on SRO with preferred growth orientation were successfully fabricated by controlling the operation parameters. Structural properties of relaxor ferroelectric PMN–PT thin films on SRO/STO substrates have been studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and atomic force microscopy (AFM). In-plane and out-of-plane alignments of the heterostructure are confirmed and the structural twinning of the materials are also revealed.     

Analysis on a mobile agent-based algorithm for network routing and management

Ant routing is a method for network routing in agent technology. Although its effectiveness and efficiency have been demonstrated and reported in the literature, its properties have not yet been well studied. This paper presents some preliminary analysis on an ant algorithm in regard to its population growing property and jumping behavior. Results conclude that as long as the value max, {i/spl Omega//sub j/|} is known, the practitioner is able to design the algorithm parameters, such as the number of agents being created for each request, k, and the maximum allowable number of jumps of an agent, in order to meet the network constraint.     

New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.