Surface modification of silicone rubber by ion beam assisted deposition (IBAD) for improved biocompatibility

We studied the preparation of antimicrobial silicone rubbers of improved interfacial strength, which could be formed with the ion beam assisted deposition (IBAD) technique for coating metallic or inorganic materials (silver (Ag), Copper (Cu), and Hydroxyapatite(HAp)/TiO₂) on the silicone surface. Those coating materials provide high product safety as well as outstanding antimicrobial activity. The deposition methodology is composed of pre‐etching with oxygen gas, vaporizing the coating materials, and post‐treatment with Ar ion. With the evaporation of the coating materials, the Ar beam was focused on the substrate to assist deposition. It was found out that the ion assisting depositions in the IBAD process give a prominent enhancement in adhesion between silicone rubbers and coatings of Ag and Cu. The HAp/TiO₂ coating layer was easily dissolved in aqueous saline solution. All deposited layers display high antimicrobial activities against Staphlococcus aureus (ATCC 6538) and Escherichia coil (ATCC 25,922), showing 99.9% reduction of bacteria, respectively. In a cytotoxicity test, the Ag and HAp/TiO₂ coated silicone shows a decrease of cytotoxicity, while the Cu coating leads to a slight increase of cytotoxicity. The result on the surface modifications of silicone rubber will be employed in further study for applications of medical or rehabilitation devices. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1095–1101, 2005     

SARS-CoV-2 Spike Protein and Mouse Coronavirus Inhibit Biofilm Formation by Streptococcus pneumoniae and Staphylococcus aureus

The presence of co-infections or superinfections with bacterial pathogens in COVID-19 patients is associated with poor outcomes, including increased morbidity and mortality. We hypothesized that SARS-CoV-2 and its components interact with the biofilms generated by commensal bacteria, which may contribute to co-infections. This study employed crystal violet staining and particle-tracking microrheology to characterize the formation of biofilms by Streptococcus pneumoniae and Staphylococcus aureus that commonly cause secondary bacterial pneumonia. Microrheology analyses suggested that these biofilms were inhomogeneous soft solids, consistent with their dynamic characteristics. Biofilm formation by both bacteria was significantly inhibited by co-incubation with recombinant SARS-CoV-2 spike S1 subunit and both S1 + S2 subunits, but not with S2 extracellular domain nor nucleocapsid protein. Addition of spike S1 and S2 antibodies to spike protein could partially restore bacterial biofilm production. Furthermore, biofilm formation in vitro was also compromised by live murine hepatitis virus, a related beta-coronavirus. Supporting data from LC-MS-based proteomics of spike–biofilm interactions revealed differential expression of proteins involved in quorum sensing and biofilm maturation, such as the AI-2E family transporter and LuxS, a key enzyme for AI-2 biosynthesis. Our findings suggest that these opportunistic pathogens may egress from biofilms to resume a more virulent planktonic lifestyle during coronavirus infections. The dispersion of pathogens from biofilms may culminate in potentially severe secondary infections with poor prognosis. Further detailed investigations are warranted to establish bacterial biofilms as risk factors for secondary pneumonia in COVID-19 patients.     

Proton exchange membranes prepared by simultaneous radiation grafting of styrene onto poly(tetrafluoroethylene‐co‐hexafluoropropylene) films. II. Properties of sulfonated membranes

Proton exchange membranes were prepared by radiation‐induced grafting of styrene onto commercial poly(tetrafluoroethylene‐co‐hexafluoropropylene) films using a simultaneous irradiation technique followed by a sulfonation reaction. The resulting membranes were characterized by measuring their physicochemical properties such as water uptake, ion exchange capacity, hydration number, and proton conductivity as a function of the degree of grafting. The thermal properties (melting and glass transition temperatures) and thermal stability of the membrane were also investigated using differential scanning calorimetry and thermal gravimetric analysis, respectively. Membranes having degrees of grafting of 16% and above showed proton conductivity of the magnitude of 10⁻² Ω⁻¹ cm⁻¹ at room temperature, as well as thermal stability at up to 290°C under an oxygen atmosphere. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2443–2453, 2000     

Part II. Properties of the grafted and sulfonated membranes

The physical and chemical properties of polystyrene grafted and sulfonated polytetrafluoroethylene (PTFE‐graft‐PSSA) membranes prepared by radiation‐induced grafting of styrene onto commercial PTFE films using simultaneous irradiation technique followed by a sulfonation reaction are evaluated. The investigated properties include water uptake, ion exchange capacity, hydration number and ionic conductivity. All properties are correlated with the amount of grafted polystyrene (degree of grafting). The thermal stability of the membrane evaluated by thermal gravimetric analysis (TGA) is compared with that of original and grafted PTFE films. The membrane surface structural properties are analysed by electron spectroscopy for chemical analysis (ESCA). Membranes having degrees of grafting of 18 % and above show a good combination of physical and chemical properties that allow them to be proposed for use as proton conducting membranes, provided that they have sufficient chemical and mechanical stability. © 2000 Society of Chemical Industry     

The characteristics of carbon nanotube‐reinforced poly(phenylene sulfide) nanocomposites

Multiwall carbon nanotube reinforced poly (phenylene sulfide) (PPS) nanocomposites were successfully fabricated through melt compounding. Structural, electrical, thermal, rheological, and mechanical properties of the nanocomposites were systematically studied as a function of carbon nanotube (CNT) fraction. Electrical conductivity of the polymer was dramatically enhanced at low loading level of the nanotubes; the electrical percolation threshold lay between 1 and 2 wt % of the CNTs. Rheological properties of the PPS nanocomposites also showed a sudden change with the CNT fraction; the percolation threshold was in the range of 0–0.5 wt % of CNTs. The difference in electrical and rheological percolation threshold was mainly due to the different requirements needed in the carbon nanotube network in different stages. The crystallization and melting behavior of CNT‐filled PPS nanocomposites were studied with differential scanning calorimetry; no new crystalline form of PPS was observed in the nanocomposites, but the crystallization rate was reduced. The thermal and mechanical properties of the nanocomposites were also investigated, and both of them showed significant increase with CNT fraction. For 5 wt % of CNT‐filled PPS composite, the onset of degradation temperature increased by about 13.5°C, the modulus increased by about 33%, and tensile strength increased by about 172%. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Applications of Mesenchymal Stem Cells in Skin Regeneration and Rejuvenation

Mesenchymal stem cells (MSCs) are multipotent stem cells derived from adult stem cells. Primary MSCs can be obtained from diverse sources, including bone marrow, adipose tissue, and umbilical cord blood. Recently, MSCs have been recognized as therapeutic agents for skin regeneration and rejuvenation. The skin can be damaged by wounds, caused by cutting or breaking of the tissue, and burns. Moreover, skin aging is a process that occurs naturally but can be worsened by environmental pollution, exposure to ultraviolet radiation, alcohol consumption, tobacco use, and undernourishment. MSCs have healing capacities that can be applied in damaged and aged skin. In skin regeneration, MSCs increase cell proliferation and neovascularization, and decrease inflammation in skin injury lesions. In skin rejuvenation, MSCs lead to production of collagen and elastic fibers, inhibition of metalloproteinase activation, and promote protection from ultraviolet radiation-induced senescence. In this review, we focus on how MSCs and MSC-derived molecules improve diseased and aged skin. Additionally, we emphasize that induced pluripotent stem cell (iPSC)-derived MSCs are potentially advanced MSCs, which are suitable for cell therapy.     

Retardation of High-Temperature Fuel Ash Corrosion of Fireside Boiler Tubes via Nanoparticles

The high-temperature corrosion rate of boiler tubes was studied as a function of inhibitor concentration, time, and temperature in the absence and presence of fuel ash. Samples of steel tubes were taken from boilers that operate in Northern Baghdad Station for Electric Power Generation. Fuel ash was collected from the boiler combustion chamber, as well. Normal and nano-MgO were used as a corrosion inhibitor in different mixing ratios. A weight loss technique was used to evaluate the corrosion rates, while scanning electron microscopy was used to study the surface morphology. It was seen that corrosion rates increased with both time and temperature, and decreased with the addition of inhibitors. The maximum inhibitor efficiency was 81 %, obtained via using nano-MgO at mixing weight ratio 2:1, 600 °C, and 10 h. The Presence of fuel ash had harmful effects on the steel surface.     

Der f 38 Is a Novel TLR4-Binding Allergen Related to Allergy Pathogenesis from Dermatophagoides farinae

It is difficult to treat allergic diseases including asthma completely because its pathogenesis remains unclear. House dust mite (HDM) is a critical allergen and Toll-like receptor (TLR) 4 is a member of the toll-like receptor family, which plays an important role in allergic diseases. The purpose of this study was to characterize a novel allergen, Der f 38 binding to TLR4, and unveil its role as an inducer of allergy. Der f 38 expression was detected in the body and feces of Dermatophagoides farinae (DF). Electron microscopy revealed that it was located in the granule layer, the epithelium layer, and microvilli of the posterior midgut. The skin prick test showed that 60% of allergic subjects were Der f 38-positive. Der f 38 enhanced surface 203c expression in basophils of Der f 38-positive allergic subjects. By analysis of the model structure of Der p 38, the expected epitope sites are exposed on the exterior side. In animal experiments, Der f 38 triggered an infiltration of inflammatory cells. Intranasal (IN) administration of Der f 38 increased neutrophils in the lung. Intraperitoneal (IP) and IN injections of Der f 38 induced both eosinophils and neutrophils. Increased total IgE level and histopathological features were found in BALB/c mice treated with Der f 38 by IP and IN injections. TLR4 knockout (KO) BALB/c mice exhibited less inflammation and IgE level in the sera compared to wild type (WT) mice. Der f 38 directly binds to TLR4 using biolayer interferometry. Der f 38 suppressed the apoptosis of neutrophils and eosinophils by downregulating proteins in the proapoptotic pathway including caspase 9, caspase 3, and BAX and upregulating proteins in the anti-apoptotic pathway including BCL-2 and MCL-1. These findings might shed light on the pathogenic mechanisms of allergy to HDM.     

Stability of tungsten oxide nanotubes film for improving photocatalytic oxidation reaction

Well-aligned anodic tungsten oxide (WO₃) nanotubes with lengths approaching 600 nm was successfully synthesised via electrochemical anodisation of tungsten (W) film at 40 V in a bath with electrolyte (pH 3) consisted of 1 M of sodium sulphate (Na₂SO₄) and 0.7 wt-% ammonium fluoride (NH₄F) for 15 min. It was found that the production of dense compact oxide layer on pure W film could be explained with high concentration of H⁺ ions accelerated the hydrolysis ability on the W surface to form thick WO₃ layer under acidic condition (pH: 3). The photocatalytic activity performance was increased by ≈15% for the dense WO₃ nanostructures film as compared to the thin and irregular WO₃ nanostructures film because of the high active surface area to absorb more photons from solar irradiation for triggering the charge carriers separation and then improvement of internal and external diffusion of the reactants.     

Toward distinguishing woodsmoke and diesel exhaust in ambient particulate matter

Particulate matter (PM) from biomass burning and diesel exhaust has distinct X-ray spectroscopic, carbon specific signatures, which can be employed for source apportionment. Characterization of the functional groups of a wide selection of PM samples (woodsmoke, diesel soot, urban air PM) was carried out using the soft X-ray spectroscopy capabilities at the synchrotron radiation sources in Berkeley (ALS) and Brookhaven (NSLS). The spectra reveal that diesel exhaust particulate (DEP) matter is made up from a semigraphitic solid core and soluble organic matter, predominantly with carboxylic functional groups. Woodsmoke PM has no or a less prevalent, graphitic signature, instead it contains carbon-hydroxyl groups. Using these features to apportion the carbonaceous PM in ambient samples we estimate that the relative contribution of DEP to ambient PM in an urban area such as Lexington, KY and St. Louis, MO is 7% and 13.5%, respectively. These values are comparable to dispersion modeling data from nonurban and urban areas in California, and with elemental carbon measurements in urban locations such as Boston, MA, Rochester, NY, and Washington, DC.