Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

The functional reanimation of paralyzed limbs.

The functional reanimation of paralyzed limbs has been a longstanding goal of neural prosthetic research, but clinically successful applications have been elusive. Natural voluntary limb movement requires four major elements: actuators (i.e., motor units), sensors (i.e., somatosensory afferents), commands (i.e., cerebral cortical activity), and control (i.e., integration of the previous three elements at various levels of the neuraxis). Prosthetic equivalents of each of these elements are, as yet, primitive and often cumbersome to deploy, but new technologies promise substantial improvements for all. This article focuses on one such technology, bionic neuon (BION) modular microimplants, and its relationship to alternative and complementary technologies. The challenge remains to select and integrate them into systems that can be tailored efficiently to the widely disparate needs of patients with various patterns of weakness and paralysis.     

A PRACTICAL CLASSIFICATION OF KEROGENS RELATED TO HYDROCARBON GENERATION

The present classification systems of kerogens have many shortcomings, especially in respect of amorphous kerogens which have, so far, remained undifferentiated in relation to hydrocarbon generation. Hence, a practical classification method based on density separation, elemental composition and optical characteristics, which discriminatingly identifies kerogens with indications of their hydrocarbon potential, has been developed. The method first divides the whole range of kerogens into liptinite and humic groups. The liptinitic kerogens are subdivided into Hyperliptinites (prolific oil sources); Mesoliptinites (which are oil-prone); Metaliptinites (gas-prone); and Hypoliptinites (having no potential for hydrocarbons). The humic kerogens are similarly divided into subgroups consisting of Hyperhumics (with some gas potential); Mesohumics (mainly gas sources); and Hypohumics (organic materials with no potential for hydrocarbon generation).     

Proposal for st-Routing Protocol

A routing protocol chooses one of the several paths (routes) from a source node to a destination node in the computer network, to send a packet of information. In this paper, we propose a new routing protocol, which we call st-routing protocol, based on st-numbering of a graph. The protocol fits well in noisy environments where robustness of routing using alternative paths is a major issue. The proposed routing protocol provides a systematic way to retry alternative paths without generating any duplicate packets. The protocol works for only those networks that can be represented by biconnected graphs.     

Multicriteria Hydraulic Fracturing Optimization for Reservoir Stimulation

A complete model is presented in this article for design optimization of hydraulic fracturing to enhance reservoir production. The model integrates reservoir properties, various design constraints to avoid induced formation damage, a hydraulically driven fracture geometry model, a hydrocarbon production model, and an economic model in deciding on the optimum values of various treatment parameters. The design constraints are intended to ensure that an optimum design obtained from the model can be executed in the field using the specified surface equipment and without causing uncontrolled fracture growth and/or initiation of multiple secondary fractures. A pseudo-3D fracture model is improved to establish better compatibility relationships between reservoir properties, treatment parameters, and fracture growth. Features of Genetic Algorithm and Evolutionary Operation are combined to develop a robust optimization algorithm that executes complex interactions between the above-mentioned modules to achieve an optimum design. The capability and robustness of the proposed model is demonstrated by applications to a tight-gas reservoir. By trade-off analysis between production/NPV and treatment cost, it is shown that only a 13% sacrifice of the maximum possible production/net present value (NPV) over ten years can save up to 52% of the fracturing treatment cost. Various other design issues are also investigated by sensitivity analyses.     

Accurate analysis of MMI devices with two-dimensional confinement

The accurate analysis of multimode interference (MMI) devices with two-dimensional (2-D) confinement has been demonstrated by using the least squares boundary residual (LSBR) method. Accurate modal propagation constants and spatial field profiles in the MMI section are obtained by using the vector H-field based finite element method. The accurate calculation of the excited modal coefficients is achieved by using the LSBR, which satisfies the continuity of the transverse field components more rigorously than using simple overlap integrals     

Modelling and controller design of an isolated diesel enginepermanent magnet synchronous generator

A method to analyze the steady-state performance of a stand-alone permanent magnet synchronous generator driven by a diesel engine is presented. The proposed method is based on equivalent d-q circuits and the phasor diagram of such a generator under steady-state conditions. A fixed capacitor-thyristor controlled reactor scheme is used to regulate the generator terminal voltage by controlling the thyristor ignition angle. Furthermore the overall system dynamics are modelled in terms of state variables and control inputs. Based on a reduced order linearized model, digital optimal state and output feedback controllers are designed by minimising a quadratic performance index using the dynamic programming technique. The objective of the controller is to maintain the load voltage and frequency constant under varying load conditions. The controller's effectiveness is assessed by examining the closed-loop system response to sudden load changes     

Assembly of hepatic gap junctions. Topography and distribution of connexin 32 in intracellular and plasma membranes determined using sequence-specific antibodies

The subcellular distribution in rat liver and the topography in intracellular and plasma membranes of connexin 32, a major protein component of gap junctions, was studied using sequence-specific anti-peptide antibodies generated to extracellular and intracellular domains of the protein. The distribution of connexin 32 in liver analyzed using SDS-polyacrylamide gel electrophoresis and Western blotting showed the relative protein levels in the subcellular fractions to be: lateral plasma membranes > Golgi membranes > sinusoidal plasma membranes > lysosomes. Low amounts of connexin 32 were detected in microsomes, endosomes, and bile canalicular plasma membranes. Six highly conserved cysteine residues are located in the amino acid sequences comprising the two extracellular loops of all connexins thus far isolated, and these loops are positioned to extend the channel in the lipid bilayers across the intercellular region of the gap junction. In the present work, the intramolecular disulfide bonds linking the extracellular loops in gap junctions were shown to be present in connexins located in plasma membranes, Golgi, and a microsomal fraction, and it was concluded that the disulfide linkages were formed in the endoplasmic reticulum. In addition, immature configurations of connexin 32, probably occurring during membrane insertion, were detected in liver microsomal fractions. The results contribute to charting of the biogenetic routes followed by connexins in hepatocytes and the general mechanisms of gap junction assembly.