Legacy system program transformation by Lyee methodology

Based on the comparative review of several approaches to legacy system conversion and revitalization, the Lyee methodology application for the issue is presented to clarify its idea, the associated procedure, and the implemented tools. It could be said that with the tools and manual developed by ICBSM&T, the mechanical transformation of the conventional program to a Lyee-structured one becomes possible as long as the programs are made in a procedure-oriented language. In addition to the program structure conversion, the Lyee methodology permits people to choose any application language in the transformed program. At the same time, quite a new approach related to the system conversion is introduced, in which the chunk of data extracted from an old program is edited to make a new conventional structure program that has a logical sequence instead of a Lyee type of declarative program. These features can be realized through the concept of LyeeBELT, which is a set of word-information about the attributes, formulae, and conditions for an independent data item.

The overall workflow of the legacy program transformation is shown in the following.

A critical part in its implementation is the feasibility study (pre-analysis) stage where necessary information is supposed to be secured, and an appropriate plan and policy about the system to be revitalized in the new system environment should be clarified so as to customize the tools accordingly. If the initial process is completed, the mechanical legacy system conversion will be realized by registering the parameters in the tool, and the reestablishment of business knowledge in the LyeeBELT will be enabled. With the regulated business logic on the LyeeBELT, the program maintenance afterwards becomes drastically simplified and stable without the ‘spaghetti’ problem, so that software evolution can be possible.     

Feasibility of a 1,400 m Span Steel Cable-Stayed Bridge

This paper describes the feasibility of 1,400 m steel cable-stayed bridges from both structural and economic viewpoints. Because the weight of a steel girder strongly affects the total cost of the bridge, the writers present a procedure to obtain a minimum weight for a girder that ensures safety against static and dynamic instabilities. For static instability, elastoplastic, finite-displacement analysis under in-plane load and elastic, finite-displacement analysis under displacement-dependent wind load are conducted; for dynamic instability, multimodal flutter analysis is carried out. It is shown that static critical wind velocity of lateral torsional buckling governs the dimension of the girder. Finally, the writers briefly compare a cable-stayed bridge with suspension bridge alternatives.     

Semantic Web: A road to the knowledge infrastructure on the internet

In this article, I describe the basic technologies for Semantic Web and relationship between Semantic Web and Knowledge Representation in Artificial Intelligence. Semantic Web is planned as an extension of the current web in order to help cooperation between computers and humans, i.e., computers and humans are expected to understand each other in the knowledge level. I first describe the vision of the Semantic Web, then introduce the current Semantic Web technologies, i.e., RDF, RDFS, and OWL. I describe relationship between the trend of Semantic Web and Knowledge Representation, and clarify challenges and difficulties of Semantic Web from the point of view of Knowledge Representation. Hideaki Takeda: He is a professor at National Institute of Informatics (NII) and a professor in Department of Informatics at the Graduate University of Advanced Studies (Sokendai). He received his Ph.D. from the University of Tokyo in 1991. His research interest in computer science includes ontology engineering, community informatics and knowledge sharing systems.     

High temperature superconductor micro-superconducting-quantum-interference-device magnetometer for magnetization measurement of a microscale magnet

We have developed a high temperature superconductor (HTS) micrometer-sized dc superconducting quantum interference device (SQUID) magnetometer for high field and high temperature operation. It was fabricated from YBa2Cu3O7-delta of 92 nm in thickness with photolithography techniques to have a hole of 4x9 microm2 and 2 microm wide grain boundary Josephson junctions. Combined with a three dimensional magnetic field coil system, the modulation patterns of critical current Ic were observed for three different field directions. They were successfully used to measure the magnetic properties of a molecular ferrimagnetic microcrystal (23x17x13 microm3), [Mn2(H2O)2(CH3COO)][W(CN)8]2H2O. The magnetization curve was obtained in magnetic field up to 0.12 T between 30 and 70 K. This is the first to measure the anisotropy of hysteresis curve in the field above 0.1 T with an accuracy of 10(-12) J T(-1) (10(-9) emu) with a HTS micro-SQUID magnetometer.     

Comparison of isolation methods using commercially available kits for obtaining extracellular vesicles from cow milk

Extracellular vesicles (EV) are important for delivering biologically active substances to facilitate cell-to-cell communication. Milk-derived EV are widely known because of their potential for immune enhancement. However, procedures for isolating milk-derived EV have not been fully established. To obtain pure milk-derived EV and accurately reveal their function, such procedures must be established. The aim of the present study was to compare methods using commercially available kits for isolating milk-derived EV. Initially, we investigated procedures to remove casein, which is the major obstacle in determining milk-derived EV purity. We separated whey using centrifugation only, acetic acid precipitation, and EDTA precipitation. Then, we isolated milk-derived EV by ultracentrifugation, membrane affinity column, size exclusion chromatography (SEC), polymer-based isolation, or phosphatidylserine-affinity isolation. Using EV count per milligram of protein, which is a good indicator of purity, we determined that acetic acid precipitation was the best method for removing casein. Using nanoparticle tracking analysis, protein quantity analysis, and RNA quantity analysis, we comprehensively compared each isolation method for its purity and yield. We found that SEC-based qEV column (Izon Science) could collect purer milk-derived EV at higher quantities. Thus, a combination of acetic acid precipitation and qEV can effectively isolate high amounts of pure extracellular vesicles from bovine milk.     

Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

Dry season water allocation in the Chao Phraya River basin,Thailand

This study examines the recent quantitative characteristics of dry season water allocation in the Chao Phraya River basin, Thailand. Previous studies have focused on inequitable allocation, where the highest priority is given to the domestic water sector and uneven irrigation water variability exists among projects in the delta. This study uses a statistical test and panel data analysis to confirm that the characteristics highlighted in previous studies remain accurate, and it discusses the source of these characteristics in order to understand the issues in water allocation in the Chao Phraya River delta.     

Acceleration of the Rate of Silver Nanoparticle Formation Using Microbubbles in a Sonochemical Process

The effect of the addition of microbubbles on the formation of silver nanoparticles produced in an ultrasonic radiation-mediated process was investigated. The addition of microbubbles with an area-based median diameter of 26.0?µm and a bubble volume density of 0.18?cm³/L significantly increased the silver nanoparticle formation rate during the sonochemical process. The size distribution of the silver nanoparticles was largely unaffected by the addition of the microbubbles. The influence of changes in the microbubble volume density on the formation of the silver nanoparticles was also investigated; it was confirmed that the rate of formation of the silver nanoparticles increased moderately with increasing volume density. The gradient in absorption spectra was approximately 30 times larger for the case when microbubbles (median diameter: 28.3?µm) were added at 0.74?cm³/L, compared with the case without microbubbles. The results suggested that the microbubbles provided reaction sites similar to cavitation bubbles in the ultrasonic reaction.     

Optimal operation of cogeneration system coordinated by aggregator for providing the demand and supply regulation capacity

Recent growth of renewable energy generations with natural variability, such as photovoltaic generation and wind turbine generation, would make the demand and supply control in a whole power system more difficult, and therefore, alternatives for demand and supply regulation resources would be required. The authors focus on cogeneration system (CGS) as one of regulation resources. In order to procure adequate volume of regulation capability, an aggregator coordinates a number of CGSs efficiently and flexibly considering the wide variety of electricity/thermal demands of CGS owners. This paper proposes a novel optimal operation strategy of CGS coordinated by the aggregator considering the energy balance and operation cost of individual CGS owner. This paper also demonstrates the availability of CGSs for regulation capability by numerical case studies in which the actual consumption profile is employed.     

Single-particle-diagnosis approach: An efficient strategy for discovering new nitride phosphors

Discovery of novel phosphors is extremely important to target the ever change of the solid state lighting technology. In this paper, we present a high-speed way to discover new phosphors, namely single-particle-diagnosis approach. This approach is based on investigating the crystal structure and luminescence of a tiny single crystal, without the necessity of the growth of large-size single crystals or the preparation of single phase powder samples. The concept of the approach and some new nitride phosphors explored by this approach are shown in this paper.