Simulation of postoperative 3D facial morphology using a physics-based head model

We propose a prototype of a facial surgery simulation system for surgical planning and the prediction of facial deformation. We use a physics-based human head model. Our head model has a 3D hierarchical structure that consists of soft tissue and the skull, constructed from the exact 3D CT patient data. Anatomic points measured on X-ray images from both frontal and side views are used to fire the model to the patient's head. The purposes of this research is to analyze the relationship between changes of mandibular position and facial morphology after orthognathic surgery, and to simulate the exact postoperative 3D facial shape. In the experiment, we used our model to predict the facial shape after surgery for patients with mandibular prognathism. Comparing the simulation results and the actual facial images after the surgery shows that the proposed method is practical.     

De Haas-van Alphen effect study of magnetic interaction in lead

Frequency and amplitude modulation (FM and AM) of a high-frequency (HF) de Haas-van Alphen oscillation due to magnetic interaction (MI) with a low-frequency (LF) oscillation in lead has been examined for field directions parallel to and close to 110, in the light of the old and of a new treatment of MI based on uniform and inhomogeneous inductions over the sample, respectively. The de Haas-van Alphen signals have been measured by the standard low-frequency field modulation method. The strength of AM and the sideband around HF have been examined as a function of the strength of FM and it is found that the experimental data deviate significantly from the prediction by the old treatment. Moreover, the deviation depends not only on the particular sample chosen to study, but also on the orientation, suggesting that the MI effect is influenced by the microscopic inhomogeneity of the sample. The absolute amplitude of LF also has been measured and is found again to deviate significantly from the prediction by the old treatment. However, the measured amplitude shows a satisfactory agreement with the prediction by the new treatment. In conclusion, the new treatment is a plausible theory which can describe all our experimental results, not only qualitatively but also quantitatively.     

Nitrogen and phosphorus effluent loads from a paddy-field district adopting collective crop rotation

Japanese paddy rice systems commonly adopt the rotation of vegetables, wheat and soybeans with paddy rice. Crop rotation may, however, increase the nutrient load in effluent discharged from the district because more fertilizer is applied to the rotation crops than is applied to paddy crops. We investigated a paddy-field district subject to collective crop rotation and quantified the annual nutrient load of effluent from the district in three consecutive years. The total annual exports of nitrogen and phosphorus over the investigation period ranged from 30.3 to 40.6 kg N ha(-1) and 2.62 to 3.13 kg P ha(-1). The results suggest that rotation cropping increases the effluent nutrient load because applied fertilizer is converted to nitrate, and surface runoff is increased due to the absence of shuttering boards at the field outlets.     

Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

Grain refinement and superplasticity in a magnesium alloy processed by equal-channel angular pressing

The extrusion/equal channel angular pressing (EX-ECAP) processing procedure, in which magnesium-based alloys are subjected to extrusion followed by ECAP, was applied to a Mg-7.5 pct Al-0.2 pct Zr alloy prepared by casting. Microstructural inspection showed the EX-ECAP process was effective in reducing the grain size from ∼21 μm after extrusion to an as-pressed grain size of ∼0.8 μm. It is shown through static annealing that these ultrafine grains are reasonably stable up to 473 K, but grain growth occurs at higher temperatures. Tensile specimens were cut from the billets prepared by EX-ECAP and testing showed these specimens exhibited superplasticity at relatively low temperatures with maximum elongations up to >700 pct. By processing through EX-ECAP to a higher imposed strain and thereby increasing the area fraction of high-angle boundaries, it is demonstrated that there is a potential for achieving high-strain-rate superplasticity. This article is based on a presentation made at the Symposium entitled “Phase Transformations and Deformation in Magnesium Alloys,” which occurred during the Spring TMS meeting, March 14–18, 2004, in Charlotte, NC, under the auspices of the ASM-MSCTS Phase Transformations Committee.     

Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation

Experiments were conducted to evaluate the utility of a new processing procedure developed for Mg-based alloys in which samples are subjected to a two-step processing route of extrusion followed by equal-channel angular pressing (designated as EX-ECAP). The experiments were conducted using a Mg-0.6 wt pct Zr alloy and, for comparison purposes, samples of pure Mg. It is shown that the potential for successfully using ECAP increases in both materials when adopting the EX-ECAP procedure. For the Mg-Zr alloy, the use of EX-ECAP produces a grain size of ∼1.4 μm when the pressing is undertaken at 573 K. By contrast, using EX-ECAP with pure Mg at 573 K produces a grain size of ∼26 μm. Tensile testing of the Mg-Zr alloy at 523 and 573 K after processing by EX-ECAP revealed the occurrence of significantly enhanced ductilities with maximum elongations of ∼300 to 400 pct.     

Effect of atomic oxygen exposure on bubble formation in aluminum alloy

In order to investigate the effect of atomic oxygen exposure of an aluminum alloy on bubble formation during welding, electron beam welding was performed on the samples exposed to atomic oxygen produced by the oxygen plasma method. The change in the aluminum surface due to the exposure was analyzed by auger electron spectroscopy. Due to the exposure of atomic oxygen, the thickness of the aluminum oxide film increases on the surface, and pores are formed during welding. The pores can be formed by the formation of the Al₂O gas through the reaction between the aluminum oxide and aluminum in a high vacuum.