The separation of fission-product rare elements toward bridging the nuclear and soft energy systems

Based on the present state of the art of the separation technology, recycling of fission-product rare elements (FRE) in the FBR spent fuel is discussed. The rad.-waste fractionation is in accordance with the present society's trend toward zero-emission, and the mean of salt-free method utilizing electrochemistry agrees with the principles of the newly established green chemistry. A catalytic electrolytic extraction method is proposed to separate the target, radioactive but potentially strategic elements, Pd, Ru, Rh, Re (Tc), Te and Se dissolved in the HLLW. It avoids secondary waste arising. This method is particularly feasible for the separation of Pd where cyclic reaction of metal cations such as Pd(II) or Fe(II), acting as promoters or mediators and already contained in HLLW, accelerates the electrochemical deposition of Ru, Rh and Re. Elemental separation not only offers alternative material resources to meet expanding demands for catalysts in Fuel Cell/Soft Energy system but is also the first step for transmutation or other selective strategies for waste management of long-lived fission products (LLFP).     

Rearrangements of the BCL6 gene and chromosome aberrations affecting 3q27 in 54 patients with non-Hodgkin's lymphoma

Chromosome aberrations affecting 3q27 are among the most frequent non-random abnormalities in non-Hodgkin's lymphomas (NHL), especially the diffuse, large cell type. Recently, an association between BCL6 rearrangement and frequent extranodal lesions, rare bone marrow infiltration and a favorable clinical outcome was reported. We performed molecular studies of the BCL6 gene in 54 patients with NHL. Twelve patients (22%) with rearranged BCL6 genes were selected for histological, clinical, molecular, and cytogenetic studies. Ten of these cases were diffuse, large cell type lymphoma, one a follicular lymphoma, and one a mantle cell lymphoma (MCL). All cases were of the B-cell type and this is the first time a rearranged BCL6 gene has been found in an MCL. Cytogenetic data for 10 cases were available and the partner sites of the 3q27 translocation were determined in 7 of 10 patients. These locations were variable, including 6p21.3, 9p22, and 14q11 in addition to the immunoglobulin loci 14q32 (IGH), 2p12 (IGK), and 22q11 (IGL). The heterogeneity in partner sites is distinct from other lymphoma subgroups and may suggest that the genetic events are not uniform among patients with BCL6 rearrangements.     

Observing the Stimulated Raman Gain Spectra of Solutions Using an Infrared Pump Pulse with Narrow Linewidth and a Low-Noise CW Probe Laser

Stimulated Raman gain (SRG) spectroscopy using infrared pump pulses with narrow linewidth and a low-noise cw probe infrared laser was proposed. High-resolution Raman spectra of solutions were obtained. The SRG spectra of crystal GaP, benzene, and toluene were measured to confirm the spectral resolution and sensitivity over the terahertz (THz) region. We discuss the polarization dependence of the spectral measurement of carbon tetrachloride. Our system can detect organic molecules in aqueous solutions.     

Correlation between the hot plate ignition test and other laboratory-scale flammability tests on rubber conveyor belts with fabric skeletons

The hot plate ignition test was conducted on ten different conveyor rubber belts with fabric skeletons. In this test, a 25 × 25 mm² belt sample was placed on a stainless steel plate in an electric furnace and heated. The ‘ignition temperature’ was determined on each sample in almost the same way as proposed in Canada. The test results were compared with those from other laboratory-scale flammability tests (i.e. the small-scale flame tests, the Oxygen Index test and the laboratory-scale gallery test). The calculated results of both sample and rank correlation coefficients imply that the ‘10 signition temperature’ in this hot plate ignition test has a correlation with the results from both the Oxygen Index test and the laboratory-scale gallery test, but that it has very little or no correlation with those from the small-scale flame tests. On the other hand, it is found that the ‘60 s ignition temperature’ in this test has a far better correlation both with the results from the small-scale flame tests and with the time to ignition in the laboratory-scale gallery test than the ‘10 s ignition temperature’.     

Novel Route to Propylene Carbonate: Selective Synthesis from Propylene Glycol and Carbon Dioxide

High surface area zirconium phosphate in an amorphous phase exhibits high activities for water-related reactions such as hydrolysis of ethyl acetate and esterification of acetic acid with ethanol. The zirconium phosphate is insoluble during the reaction, is recoverable by simple filtration, and can be reused at least five times without any treatment.     

A new approach to improve the high-voltage cyclic performance of Li-rich layered cathode material by electrochemical pre-treatment

Lithium-rich nickel–manganese–cobalt oxide, Li[Ni_0.17Li_0.2Co_0.07Mn_0.56]O₂, was prepared by a co-precipitation method, and its cyclic behavior at a high potential was investigated. The as-prepared material shows a rapid capacity fading in its initial several cycles when it was operated above 4.5 V, which could be significantly improved through a pre-cycling treatment. Its reversible capacity in the range of 4.8–2 V could be increased from 200 to 250 mAh g⁻¹ after 50 cycle through a stepped pre-cycling treatment.     

Selective impurity segregation at a near-Σ5 grain boundary in MgO

Grain boundaries (GBs) together with their associated impurity segregation often affect or alter properties of many polycrystalline materials. However, their atomic-scale structures remain difficult to resolve spatially, especially for those with an orientation misalignment. Here, we apply a bicrystal technique to fabricate the near-Σ5 GBs of MgO with a misalignment angle from the exact Σ5 orientation relationship and show an unexpected selective impurity segregation behavior at this GB. We find that the near-Σ5 GB comprises an alternating array of five exact Σ5 GB structural units and one deformed Σ17 GB unit, and interestingly that the Ca and Ti impurities are co-segregated to the Σ5 GB structural units, yet are not to the deformed Σ17 GB structural units. The findings are important for the understanding of GBs with a misalignment and impurity segregation and for correlating structures with properties in polycrystalline materials.     

Improvement of thermal characteristics of latent heat thermal energy storage units using carbon-fiber brushes: experiments and modeling

Brushes made of carbon fibers with a high thermal conductivity are inserted on the shell side of a heat exchanger to enhance the conductive heat transfer rates in phase change materials. The experimental results show that the brushes essentially improve the heat exchange rate during the charge and discharge processes even when the volume fractions of the fibers are about one percent. A three-dimensional model describing the heat transfer in the heat exchanger is numerically solved. The model predicts well the experimental outlet fluid temperatures and the local temperatures in the composite.     

Enhanced heat transfer during oscillatory flow in annular channels

Heat transfer during oscillatory flow in a circular straight tube with a solid‐core tube inserted in its center was numerically simulated. The purpose of the solid‐core tube is to enhance axial heat transfer by increasing the lateral heat transfer effect for high frequency of the oscillatory flow. Simulation results showed that (a) axial heat transfer increases with the increasing diameter of the solid‐core tube, (b) the material of the solid‐core tube does not significantly affect axial heat transfer, and (c) efficiency based on the ratio of heat transfer to the work done is higher than that in a bundle of circular capillary tubes. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(1): 61–74, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20094     

Dynamical Transition of 4He Crystallization in a Very High Porosity Aerogel

Crystallization of ⁴He in aerogels of 90 and 96% porosities shows a dynamical phase transition at around 600 mK due to the competition between thermal fluctuation and disorder: crystals grow via creep at high temperatures and via avalanche at low temperatures. In a very high porosity 99.5% aerogel, however, the transition had not been observed in our previous publication (Nomura et al. in Phys. Rev. Lett. 101:175703, 2008). We improved the spatial resolution of the video image and found that the 99.5% aerogel did have the transition at around 200 mK, which is much lower than those of the lower porosities. The avalanche size is significantly smaller in the 99.5% aerogel. The reduction in the transition temperature and avalanche size may be the consequence of weaker disorder for the crystallization in the very high porosity aerogel.