Infrared study of catalytic reduction of lean NOx with alcohols over alumina-supported silver catalyst

Two intense IR absorption bands due to surface isocyanate (-NCO) species have been observed at 2262 and 2232 cm^–1 when an alumina-supported silver catalyst is exposed to a mixture of NO, O₂ and ethanol at 150°C and subsequently heated to > 300°C in vacuum. The intensity of the isocyanate band is hardly affected by the water existing in the mixture. Methanol is less reactive than ethanol for the formation of isocyanate species. The reaction mechanism of catalytic reduction of lean NOx with alcohols is discussed based on these IR spectroscopic findings.     

Synthetic Molecular Gear Based on Double-Decker Porphyrin Complexes

New rotary molecular machines (1 and 2) were synthetically constructed from two distinct porphyrin-based rotors, a cerium(IV) bis(porphyrinate)s double-decker (CeDD) and a porphyrinatorhodium(III)-based rotor. These rotors are adjacently mounted on rotational axes aligned to near vertical as resembling the bevel-gear-shaped structure. Structural study using NMR analysis reveals that these distinct rotors are connected through a coordination bond between rhodium(III) and a pyridyl group. At temperature from 193 to 393 K, each rotor represents rotational motion driven by heat fluctuation without decomposition into the corresponding precursors in dichloromethane-d ₂ and tetrachloroethane-d ₄. Importantly, the mechanical interaction between the teeth of these rotors is strongly dependent on the central metal atom in a DD rotor and the teeth structure in a porphyrinatorhodium(III)-based rotor. Understanding such relationship between the chemical structures and mechanical interaction is of importance for generating cooperative motion in the hybrid machinery system.     

利用普通小球藻Chlorella vulgaris C9-JN2010处理氨基酸工业废水的研究

用普通小球藻Chlorella vulgaris C9-JN2010处理氨基酸工业废水,实现废水无害化利用。在微型鼓泡式光反应器中,(25±1)℃,pH(6.5±0.5),0.1 vvm空气流速,4 000 lux,16 h:8 h光暗比条件下,分别考察小球藻在体积分数为20%、40%、60%、80%及100%的氨基酸废水中培养生物量变化及TN、TP、COD的去除率。结果表明,体积分数40%氨基酸废水处理效果最好,停留时间3～4 d,藻细胞干重、比生长速率和最大生产强度分别为0.731 g/L、0.565 d-1、0.243 g/(L.d);废水中TN、TP及COD的去除率分别为92.0%、98.0%及80.0%,对应去除强度分别为30.7、3.28、133.3mg/(L.d)。利用小球藻可以较彻底的去除氨基酸废水中氮、磷及COD等营养,达到污水处理效果。     

Runoff Analysis for a Small Watershed of Tono Area Japan by Back Propagation Artificial Neural Network with Seasonal Data

The rainfall runoff (R-R) process was studied for two small sub-basins having different sizes in a mountainous catchment of Tono area Japan. The runoff and other meterological data have been collected in this catchment for the last 14 years. The major objective of this study was to construct numerical models for these sub-basins to predict runoff after 1/2 and 1 h. The effects of season and the size of the catchment on R-R process were also investigated. The hydrogeological conditions of the catchment were studied prior to the analyses. The data obtained for summer (rainy) and winter (dry) seasons were treated separately in order to study the seasonal effects on the model development. The back propagation artificial neural network technique (BPANN) and the multivariate autoregressive and moving average models (ARMA) were adopted for the analysis. It was found that for very small catchments the seasonal effects are dominant and therefore separate models should be developed for each season to obtain better forecasting estimates. It was also found that the predictions by BPANN models were better than multivariate ARMA models for intense rains having complex R-R relationships in summer. On the other hand, both the modelling techniques yielded almost similar results for smaller rains in winter. It was also found clearly that the accuracy of prediction decreased with the increase of the time period for prediction.     

Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.     

Dual-metal gate CMOS technology with ultrathin silicon nitride gatedielectric

We report the first demonstration of a dual-metal gate complementary metal oxide semiconductor (CMOS) technology using titanium (Ti) and molybdenum (Mo) as the gate electrodes for the N-metal oxide semiconductor field effect transistors (N-MOSFETs) and P-metal oxide semiconductor field effect transistors (P-MOSFETs), respectively. The gate dielectric stack consists of a silicon oxy-nitride interfacial layer and a silicon nitride (Si₃N₄) dielectric layer formed by a rapid-thermal chemical vapor deposition (RTCVD) process. C-V characteristics show negligible gate depletion. Carrier mobilities comparable to that predicted by the universal mobility model for silicon dioxide (SiO₂) are observed     

EFFECT OF FLUIDIZING PARTICLE ON DRYING CHARACTERISTICS OF POROUS MATERIAL IN FLUIDIZED BED

The drying characteristics of porous material in fluidized bed were examined theoretically and experimentally. The brick ball was used as the sample and immersed in the fluidized bed. The glass beads were used as the fluidizing particles and the particle diameters were changed. When the pore diameter of sample was relatively large, the fluidizing particles were adhered on the sample surface. In the theoretical analysis, the heat and mass transfers in adhered particle layer were considered. The fluidizing particles were adhered on the sample surface during the earlier period of drying. The sample temperature largely decreased when the mass of adhered particle decreased. The calculated results are in good agreement with experimental data. The diameter of fluidizing particle had a small effect on the drying time. The excess increments in drying gas temperature hardly contributed to shortening the drying time.     

Geometry Dependence of Magnetization Reversal in Nanocomposite Alloys

The geometrical optimization of aligned hard-soft permanent-magnet nanocomposites is investigated by model calculations. Considered criteria are the shapes of the soft and c-axis-aligned hard phases, the packing fraction of the soft phase, and magnetostatic interactions. Taking into account that the energy product is enhanced via the volume fraction of the soft phase, subject to maintaining coercivity, we find that the best structures are soft-magnetic cubes as well as long rods with a square cross section. Comparing embedded soft cubes with embedded soft spheres of the same size, our nucleation-field analysis shows that the volume fraction of the soft phase is enhanced by 91%, with a coercivity reduction of only 25%. Magnetostatic interactions often but not always deteriorate the permanent-magnet performance, as exemplified by the example of MnBi:FeCo bilayers and multilayers.     

EFFECTS OF OPERATIONAL CONDITIONS ON DRYING CHARACTERISTICS IN CLOSED SUPERHEATED STEAM DRYING

The effects of operational conditions on the drying performance in closed superheated steam drying were examined theoretically and experimentally. The vapor generated from the sample was circulated in the drying chamber. In the theoretical analysis, the replacement of air with vapor in drying chamber and the convective vapor transfer in sample were considered. At the start of drying, the drying chamber was filled with air. As the drying proceeded, the air was replaced with the vapor generated from sample. The calculated results explained the characteristics of experimental data. The pore diameter of sample had little effect on the drying characteristics. During the internal evaporation period, the evaporation occurred in the narrow zone, which moved from the surface to the bottom of sample. The convective vapor transfer in sample had a significant influence on the drying performance. The excess increments in temperature and velocity of drying gas hardly contributed to shortening the drying time.     

Silver vanadium phosphorous oxide, Ag2VO2PO4: Chimie douce preparation and resulting lithium cell electrochemistry

Recently, we have shown silver vanadium phosphorous oxide (Ag₂VO₂PO₄, SVPO) to be a promising cathode material for lithium based batteries. Whereas the first reported preparation of SVPO employed an elevated pressure, hydrothermal approach, we report herein a novel ambient pressure synthesis method to prepare SVPO, where our chimie douce preparation is readily scalable and provides material with a smaller, more consistent particle size and higher surface area relative to SVPO prepared via the hydrothermal method. Lithium electrochemical cells utilizing SVPO cathodes made by our new process show improved power capability under constant current and pulse conditions over cells containing cathode from SVPO prepared via the hydrothermal method.