Formation of uniform GaAs multi-atomic steps with 20–30 nm periodicity and related structures on vicinal (111)B planes by MBE

We studied morphology of GaAs surfaces and the transport properties of two-dimensional electron gas (2DEG) on vicinal (111)B planes. Multi-atomic steps (MASs) are found on the vicinal (111)B facet grown by molecular beam epitaxy, which will affect electron transport on the facet. We also studied how the morphology of GaAs epilayers on vicinal (111)B substrates depends on growth conditions, especially on the As₄ flux. The uniformity of MASs on the substrates have been improved and smooth surfaces were obtained when the GaAs was grown with high As₄ flux, providing step periodicity of 20 nm. The channel resistance of the 2DEG perpendicular to the MASs is reduced drastically with this smooth morphology. These findings are valuable not only for fabricating quantum devices on the (111)B facets but also those on the vicinal (111)B substrates.     

Analysis of an Electromagnetic Field Created by Line Current Using Constrained Interpolation Profile Method

Development of accurate schemes is a technical issue related to calculation of electromagnetic fields. This study uses constrained interpolation profile (CIP) method to analyze electromagnetic fields created by line current. This is a novel method proposed by Yabe. Comparison of results obtained using finite difference time domain (FDTD) analysis and CIP analysis indicates that CIP analysis provides higher accuracy using identical discretization. In addition, given the same level of accuracy, CIP analysis requires less memory and less calculation time     

Sub-50-nm physical gate length CMOS technology and beyond usingsteep halo

Sub-50-nm CMOS devices are investigated using steep halo and shallow source/drain extensions. By using a high-ramp-rate spike annealing (HRR-SA) process and high-dose halo, 45-nm CMOS devices are fabricated with drive currents of 650 and 300 μA/μm for an off current of less than 10 nA/μm at 1.2 V with T_ox^inv =2.5 nm. For an off current less than 300 nA/μm, 33-nm pMOSFETs have a high drive current of 400 uA/μm. Short-channel effect and reverse short-channel effect are suppressed simultaneously by using the HRR-SA process to activate a source/drain extension (SDE) after forming a deep source/drain (S/D). This process sequence is defined as a reverse-order S/D (R-S/D) formation. By using this formation, 24-nm nMOSFETs are achieved with a high drive current of 800 μA/μm for an off current of less than 300 μA/μm at 1.2 V. This high drive current might be a result of a steep halo structure reducing the spreading resistance of source/drain extensions     

Cytokines affecting survival and differentiation of an astrocyte progenitor cell line

The effects of various cytokines on survival and differentiation of an astrocyte progenitor cell line (AP-16) were examined. Epidermal growth factor (EGF) deprivation caused death of AP-16 cells by apoptosis. Transforming growth factor-alpha (TGF-alpha) and basic fibroblast growth factor (bFGF) prevented the apoptosis occurring in the absence of EGF. Leukemia inhibitory factor (LIF) and ciliary neurotrophic factor (CNTF) induced glial fibrillary acidic protein (GFAP) and decreased A2B5 antigen in AP-16 cells, indicating that these cytokines induced AP-16 cells to differentiate into astrocytes.     

Pulsed KrF excimer laser annealing of silicon solar cell

The pulsed KrF excimer laser annealing of silicon films for solar cell with EBEP-CVD and LP-CVD was studied theoretically and experimentally. Three-dimensional thermal diffusion equation for microcrystalline and amorphous silicon was solved by using the finite difference methods. The results of our heat-flow simulation of laser re-crystallization in a laser irradiation with 50 ns pulse duration almost agree with the experimental results in re-crystallization depth of 0.7 μm for microcrystalline silicon (EBEP-CVD) and 0.4 μm for amorphous silicon (LP-CVD) in a single pulse excimer laser annealing.     

Effects of the velocity saturated region on MOSFET characteristics

A simple, accurate and universal relationship between MOSFET drain current in saturation, effective channel length, and gate drive has been found. It can be explained by a simple analytical model, whose validity is supported by numerical simulation. The model shows that the length of a velocity saturated region is a crucial parameter for describing MOSFET performance, particularly for short channel devices. The shrinkage of the length deteriorates the merit of channel length scaling     

Interleukin-1 beta-converting enzyme mediates cisplatin-induced apoptosis in malignant glioma cells

Increasing the susceptibility of tumor cells to apoptotic cell death following chemotherapy is of importance to the outcome of cancer treatment. Although the tumor suppressor gene p53 is required for efficient induction of apoptosis by chemotherapeutic agents, it is not the only apoptosis mediator gene. The molecular mechanisms mediating apoptosis following chemotherapy via p53-dependent or p53-independent pathways remain unclear. We show here that cis-diamminedichloroplatinum (cisplatin) induces the expression of interleukin-1 beta-converting enzyme (ICE), a mammalian homologue of the Caenorhabditis elegans cell death gene ced-3, in murine and human malignant glioma cells during apoptosis regardless of their p53 status. Furthermore, overexpression of the murine ICE gene induces apoptosis in these tumor cells. The apoptosis induced by cisplatin treatment or murine ICE overexpression can be suppressed by the tetrapeptide ICE inhibitor Ac-YVAD-CMK or the apoptosis inhibitors bcl-2 or bcl-2-related bcl-XL gene. These findings suggest that ICE may mediate apoptosis induced by chemotherapy, and its induction could represent a novel approach for the effective treatment of malignant glioma.     

Optical data storage by novel photoelectrochromic polymer

A novel elastic polymer containing 4,4′-bipyridinium salts with tetrakis[3,5-bis(trifluoromethyl)phenyl]borate as part of the main chain was synthesized. The cast film showed persistent and reversible colour changes due to photoinduced electron transfer upon excitation of an ion-pair charge-transfer band (_ex >365 nm) in vacuo. The lifetime of the coloured state markedly depended on temperature. The optically written data were stored without decay below 0°C and were erased thermally at elevated temperatures. The colour changes were reversibly repeatable for many times.     

Sinterability and properties of Ti(N1−x,O x ) y -(V,Ta)C-Ni sintered alloys having a golden colour

The effect of oxygen and carbide addition on the sinterability of TiN _y (0.42<y<1)-Ni alloys, in which part of the nitrogen is replaced by oxygen was investigated. It was found that sinterability increased as the oxygen and carbide content increased, but the strength of the resultant sintered alloys was significantly reduced due to the presence of Ni₃Ti and Ti₂O₃ phases when the oxygen content exceeded 50 mol %. The sintered alloy with the highest hardness was found whenx=0.7,y=0.78 and the (V,Ta)C content was 18% by weight and this alloy was characterized by having a low density, good corrosion resistance and the colour of gold.