Excess estrogen sulfoconjugation as the possible cause for a poor sign of parturition in pregnant cows carrying somatic cell clone fetuses

We conducted this study to elucidate a factor causing a poor sign of parturition and prolonged gestation, which is frequently observed in cows carrying somatic clone fetuses. Pre-partum rises in concentrations of plasma estrone and estradiol-17beta in the recipient cows pregnant with clones were subtle. By contrast, the plasma concentration of estrone sulfate in clone pregnancies increased gradually from pre-initiation of parturition induction whereas control cows that received in vivo-derived embryos showed a significant increase at parturition. Therefore, in clone pregnancies, the ratio of estrone/estrone sulfate was low during the pre-partum period compared with control. Messenger RNA expression of estrogen sulfotransferase (SULT1E1) in the placenta at parturition was significantly higher in clone pregnancies than control pregnancies and was localized in binucleate cells (BNC). SULT1E1 mRNA abundance was negatively and positively correlated with concentrations of maternal estrone and estrone sulfate at parturition respectively. Messenger RNA expressions of estrogen sulfatase (STS) and aromatase (CYP19) were similar between clone and control pregnancies and were localized in BNC and caruncular epithelial cells. STS and CYP19 mRNA abundances showed positive correlations with maternal estradiol-17beta concentration. The population of BNC in the placenta did not differ between clone and control pregnancies. Plasma cortisol concentration of vaginally delivered newborn clone calves was comparable with those of control, although cesarean section delivered clone calves showed a low concentration. These results suggest that excess estrogen sulfoconjugation is the reason for the perturbed low ratio of active to inactive estrogens and the resulting hormonal imbalance contributes to the lack of overt signs of readiness for parturition in cows pregnant with clones.     

Salmonella prevalence in seafood imported into Japan

A total of 353 samples of 29 types of seafood were tested for Salmonella prevalence and total microbial population. Salmonella enterica serotype Weltevreden was isolated from 2 of 47 black tiger prawn samples. The contamination levels of Salmonella were in a range of <30 to 40 most probable number per 100 g. In addition, one sample of black tiger prawns and two samples of white shrimp were positive for Salmonella invA gene on PCR assay. Although the mean aerobic bacterial count was greater than 4 log CFU/g in most of the sample types, those in the two Salmonella-isolated samples of black tiger prawn were 7.48 and 5.18 log CFU/g, respectively. These results indicate the possibility that shrimp and prawns contribute to foodborne infections. The improvement of seafood quality is an important issue, and the information on contamination by pathogens should be provided as feedback to the originating country, with the aim of increasing safety.     

Performance of an impulse turbine with fixed guide vanes for wave power conversion

A simple fixed geometry impulse turbine has been studied as a suitable power converter in Oscillating Water Column based wave power plants. Comparison with the Wells turbine, which is the commonly used self-rectifying turbine in such applications, shows it to be superior in performance under irregular flow conditions. Optimum guide vane angle for maximum efficiency has been arrived at based on the five angles tested.     

Analysis of close-contact melting for octadecane and ice inside isothermally heated horizontal rectangular capsule

Close-contact melting characteristics of phase change materials (PCM) inside horizontal rectangular capsules are examined experimentally. The capsules are heated isothermally and three kinds of aspect ratios (H/W = 3, 1 and 1/3) are provided. Octadecane and ice are used, respectively, as PCM. A method of analysis applying Nusselt's liquid film theory to the close-contact melting heat transfer in the rectangular capsule is presented. The analytical results show good agreement with the experimental data. For the melting of ice, it is found that the effect of natural convection resulting from density inversion of water at 4°C becomes significant for large Stefan numbers.     

Hydrogen absorption enhancement of nanocrystalline Li3N/Li2C2 composite

A nanocrystalline composite of lithium nitride and lithium carbide was synthesized through melt infiltration of lithium metal into the mesopores of carbon aerogels followed by nitrogenation with nitrogen gas. The structure, surface properties, and morphology of the prepared samples were examined by XRD, N₂ adsorption at 77 K, FE-SEM, FE-TEM, and TPD/MS. It was found that some of the lithium metal reacted with the carbon to form lithium carbide, and some of the lithium metal was transformed into lithium nitride by nitrogenation, yielding a composite of lithium nitride and lithium carbide. Relative to the bulk lithium nitride, the lithium nitride in the composite showed a significantly enhanced sequential hydrogen absorption capacity and a lowered temperature of hydrogenation/dehydrogenation.     

Optimization of interface structures in crystalline silicon heterojunction solar cells

In heterojunction solar cells consisting of hydrogenated amorphous silicon (a-Si:H) and crystalline silicon (c-Si), suppression of epitaxial growth at the heterointerface is found to be crucial to achieve high solar cell efficiencies. In order to avoid the epitaxial growth, wide-gap hydrogenated amorphous silicon oxide (a-SiO:H) has been applied to the heterojunction solar cells. We have fabricated a-SiO:H/c-Si solar cells using n-type and p-type c-Si substrates and demonstrated that incorporation of the a-SiO:H i layer prevents the harmful epitaxial growth at the heterointerface completely.     

Structure and properties of 6061 + 26 mass% Si aluminum alloy produced via coupled rapid solidification and KOBO-extrusion of powder

Experiments on mechanical consolidation of rapidly solidified (RS) powder of 6061 + 26 mass% Si alloy were performed using the oscillating-die extrusion method. The RS powder was wrapped in thin-wall 6061-alloy cup 35 mm in diameter and vacuum-compressed by means of 100 ton press. Bars 8 mm in diameter were extruded with cross-section reduction of λ = 19 without any preheating of the charge. Tubes with a diameter/wall thickness of 14 mm/1 mm and cross-section reduction of λ = 33 were also manufactured with success. TEM/STEM observations revealed a very fine structure of as-extruded material and bimodal distribution of quasi-spherical silicon particles. Statistical analysis revealed a silicon fine fraction of 0.1–0.7 μm and a coarse fraction 2.1–2.5 μm in diameter. Examination by means of TEM did not reveal any significant changes in the morphology of the silicon particles, even when a high extrusion ratio and the material annealing after deformation were used. Hot compression tests on as-extruded rods (λ = 19) and preliminary annealed samples were performed at a constant true strain rate of 5 × 10^?3 s^?1 within the temperature range of 293–823 K. High strength of the material and relatively high ductility of samples deformed by compression up to ?_t ? 0.4 were observed. The maximum flow stress value for as-extruded material was reduced with deformation temperature from ～390 to ～3.5 MPa for 293 and 823 K, respectively. Annealing of the samples at 773 K/30 min was found to reduce the maximum flow stress by 30–40%. Tensile strengths of similar as-cast alloys and materials manufactured by means of other powder metallurgy methods were shown for the purpose of comparison.     

Quantum Effects on Hydrogen Isotopes Adsorption in Nanopores

We have investigated the applicability of simulations and theoretical techniques for exploring the selectivities of hydrogen isotopes. We have simulated the adsorption isotherms of H₂ in an idealized carbon slit pore at 77 K by using the grand canonical Monte Carlo simulations with the Feynman-Hibbs effective potential (FH-GCMC) and the rigorous path integral method (PI-GCMC), and we obtained good agreement between the isotherms from both simulations. This suggests that FH-GCMC, which uses the approximative Feynman-Hibbs treatment, is as useful as PI-GCMC for exploring H₂ adsorption at 77 K. Moreover, we show that the ideal adsorption solution theory (IAST) can predict the selectivity of D₂ over H₂ in the interstices of single-wall carbon nanotube (SWNT) bundles at 77 K (below 0.1 MPa) very well by comparing the obtained results with the mixture adsorption FH-GCMC simulations. This indicates that IAST is also applicable to the estimation of the selectivity of D₂ over H₂ at moderate pressures and at 77 K from experimental single-component adsorption isotherms. We also demonstrate that the FH-GCMC simulation can reproduce the experimental adsorption isotherms of H₂ and D₂ in aluminophosphate AlPO₄-5 at 77 K. Finally, we analyze the selectivity of D₂ over H₂ by IAST with the experimental single-component adsorption isotherms of H₂ and D₂ at 77 K for a variety of adsorbents: AlPO₄-5, activated carbon fibers (ACFs), HiPco SWNT, and SWNHs. The selectivities predicted by the experimental adsorption data based on the results from the FH-GCMC simulations are presented and discussed.     

Flow fields with vortex in a small semi-open axial fan

In order to clarify the effect of tip clearance (TC) size on fan performance and the flow field at rotor outlet in a small semi-open axial fan, the experimental investigation was carried out. The tip diameter of test fan rotor was 180mm and test TC sizes were 1mm (TC=1mm) and 4mm (TC=4mm). Fan characteristics tests were carried out for two cases of TC size and three-dimensional velocity fields at rotor outlet were measured using a single slant hot-wire probe at four flow-rate conditions. As a result, it was found that the pressure — flow-rate characteristics curves for two cases showed almost the same tendency. However, the ensemble averaged velocity profiles along radial measurement stations of TC=4mm largely changed compared with that of TC=1mm in cases of small flow-rate condition. From the phase-locked averaging results, it was also found that the vortex existed in the rotor outlet flow field of high flow-rate condition for each TC case. Compared with the vortices for TC=1mm and TC=4mm, the vortex for TC=4mm was stronger than that for TC=1mm.