褐煤成型的研究

由于褐煤具有含水率高，灰份大，易风化，发热值低等特点，使得成型难度很大．本文重点研究水份粒度、添加剂、成型压力等对褐煤成型的影响．最佳条件：粒度＜１ｍｍ，水份１４～１６％，压力＞５０Ｔｆ，添加剂１０～２０％．     

High clay content nanocomposite hydrogels with surprising mechanical strength and interesting deswelling kinetics

A series of high hectorite content nanocomposite Poly (N-isopropylacrylamide), (PNIPAAm), hydrogels have been successfully synthesized by choosing a special kind of hectorite (Laponite XLS) modified by tetrasodium pyrophosphate. It was found that these hydrogels show surprising mechanical properties (i.e. tensile strength: 1 MPa, elongation at break: 1400%) and complicated deswelling behavior, which are due to the high clay content of the hydrogels and ionic dispersant contained in Laponite XLS, respectively.     

Hydrodynamics of gas-solid flow around immersed tubes in bubbling fluidized beds

A numerical study was conducted based on the gas-solid two-fluid model using the body-fitted coordinate system to analyze the behavior of particles and bubbles flow in bubbling fluidized beds without and with immersed tubes. The kinetic theory of granular flow was implemented in the model. The images of simulated instantaneous particle concentration and velocity gave the process of the formation, coalescence and eruption of bubbles. The effects of the tube pitch and superficial gas velocity on the fluidization in a bubbling fluidized bed were investigated. Calculated bubble frequencies without and with immersed tubes were in agreement with previous experimental and simulation findings. The wavelet multi-resolution analysis was used to analyze the simulated data of instantaneous particle concentration. From the random-like particle concentration fluctuations, the fluctuating components due to particle flow and bubble motion can be extracted based on the wavelet multi-resolution analysis over a time-frequency plane.     

填充床鼓泡电化学反应器行为特性研究──Ⅰ.丙烯阳极直接氧化的数学模拟

本文建立了填充床鼓泡电化学反应器的一维数模．该模型既考虑了反应动力学，也考虑了体系的基本传递特性．模拟结果可以描述床层的径向电势、电流和浓度分布．     

An NMR study of the dissociation of N,N′-(2-propyloximino)-4,4′-methylenebis(phenylcarbamate) and its crosslinking of polymers containing labile hydrogens. II

Nuclear magnetic resonance spectroscopy has been used to study the dissociation and reaction of N,N′-(2-propyloximino)-4,4′-methylenebis(phenylcarbamate), as a crosslinking agent for polymers containing labile hydrogens. The crosslinking of poly(acrylic acid), polyacrylamide, and poly(vinyl alcohol) was found to result upon heating each to 150°C for 10 min with this component at 2–10 wt %.     

Highly moisture-proof polysilsesquioxane coating prepared via facile sol-gel process

A highly moisture-proof polysilsesquioxane coating was obtained from a new bis-silylated precursor, which was synthesized from 3-aminopropyltriethoxysilane (APTES) and m-xylylene diisocyanate (m-XDI) in tetrahydrofuran (THF) and verified by ¹H MAS NMR. For direct comparison purposes, an SiO₂ coating was also prepared by the Stöber method using tetraethoxysilane (TEOS) as the reactant. Interestingly, the coating obtained from the polysilsesquioxane sol exhibited a much higher moisture resistance capability than its counterpart, which was attributed to its more compact feature between nanoparticles as characterized by N₂ absorption experiment and transmission electron microscopy (TEM). Furthermore, its high transparency of about 92% showed potential for application in the protection of optical crystals.     

Microstructure and Properties of Co2+: ZnAl2O4/SiO2 Nanocomposite Glasses Prepared by Sol–Gel Method

Transparent bulk Co²⁺: ZnAl₂O₄/SiO₂ nanocomposites containing nanocrystalline Co²⁺: ZnAl₂O₄ dispersed in silica glass matrix were obtained by the sol–gel method. The gels of composition 89SiO₂–6Al₂O₃–5ZnO− x CoO ( x =0.2, 0.4, 0.6, 0.8, 1.0) (mol%) were prepared at room temperature by using two different aluminum salts, aluminum nitrate and aluminum alkoxide (aluminum-iso-propoxide, Al(OPrⁱ)₃), as starting materials. The transparent gels were converted to the crystalline phase of gahnite by heating above 900°C. The microstructural evolution of gels was characterized. The effect of Co²⁺ concentration on spectroscopic properties was also discussed. Co²⁺: ZnAl₂O₄ nanocrystals dispersed in the SiO₂-based glass are formed at lower heat-treatment temperature and shorter heating time by using Al(OPrⁱ)₃ as raw material.     

覆铜板用环氧树脂的改性研究进展

本文介绍了环氧树脂在覆铜板中的使用情况和当前国内外对环氧树脂进行改性的研究现状，并介绍了今后覆铜板用环氧树脂的研究方向。     

Relay selection with feedback beamforming information through designed sector sweep report frame for mmWave WPANs

This paper proposes a novel relay selection strategy based on the feedback beamforming （BF） information through designed sector sweep （SSW） report frame for millimeter-wave （mmWave） wireless personal networks （WPANs）. First, an SSW report frame compatible with IEEE 802.11ad standard is designed. Second, an approach collecting instantaneous channel state information （CSI） overheard during BF is devised. Third, with the aim of minimizing the outage probability and maximizing the overall network throughput capacity, the optimal relay selection issue for non-line-of-sight （NLoS） links is formulated as a bipartite graph, and Kuhn Munkres （KM） algorithm is provided to resolve it. Both theoretical analysis and simulation results show, with CSI considering NLoS conditions and selected relays according to the overall network throughput capacity maximization principle, the improvements achieved over opportunistic relay selection strategy in terms of overall network throughput capacity and outage probability with minimal modifications to IEEE 802.1lad.     

Degradation of a textile azo dye by pulsed arc discharge to the surface of wastewater

The pulsed arc discharge to the surface of wastewater was applied to the degradation of a textile azo dye (Acid Red 27). A high-voltage electrode (discharging electrode) was vertically placed above the surface of the wastewater while the wastewater itself was grounded. The pulsed arc discharge occurred between the tip of the discharging electrode and the surface of the wastewater, producing various oxidative species. Oxygen was used as the working gas instead of air to prevent nitrogen oxides from forming. The effect of several parameters on the chromaticity and chemical oxygen demand (COD) removal was examined. The results obtained showed that the chromaticity of the wastewater was completely removed by this process and the COD also decreased significantly. It has been found that ozone formed in the gas phase mainly affects the removal of the dye. The contribution of other effects such as ultraviolet light emission and OH radical formation during the arc discharge to the degradation of the dye was found to be less than 15%. For the present reactor system, the optimum pH, pulse repetition rate and agitation speed were found to be 3.0, 110 Hz and 300 rpm, respectively.