Identification of probe request attacks in WLANs using neural networks

Any sniffer can see the information sent through unprotected ‘probe request messages’ and ‘probe response messages’ in wireless local area networks (WLAN). A station (STA) can send probe requests to trigger probe responses by simply spoofing a genuine media access control (MAC) address to deceive access point (AP) controlled access list. Adversaries exploit these weaknesses to flood APs with probe requests, which can generate a denial of service (DoS) to genuine STAs. The research examines traffic of a WLAN using supervised feed-forward neural network classifier to identify genuine frames from rogue frames. The novel feature of this approach is to capture the genuine user and attacker training data separately and label them prior to training without network administrator’s intervention. The model’s performance is validated using self-consistency and fivefold cross-validation tests. The simulation is comprehensive and takes into account the real-world environment. The results show that this approach detects probe request attacks extremely well. This solution also detects an attack during an early stage of the communication, so that it can prevent any other attacks when an adversary contemplates to start breaking into the network.     

Receptance coupling for end mills

Identification of chatter free cutting conditions, the chatter stability lobes, requires a measurement of the frequency response function (FRF) of each tool mounted on the spindle. This paper presents a method of assembling known dynamics of the spindle–tool holder with an analytically modeled end mill using the receptance coupling technique. The classical receptance technique is enhanced by proposing a method of identifying the end mill–spindle/tool holder joint dynamics, which include both translational and rotational degrees of freedom. The method requires measurement of FRFs with impact tests applied on the spindle–tool holder assembly and blank calibration cylinders attached to the spindle. The spindle and tool holder characteristics are completely identified from the two experiments, and used for the mathematical prediction of FRF for end mills with arbitrary dimensions. The proposed method is experimentally proven and verified in cutting tests.     

Photosensitized free radical polymerization using pyridinium salts

Summary The polymerization of methyl methacrylate (MMA), ethyl acrylate (EA), styrene (St) and 2-vinyl pyridine (VP) is initiated upon irradiation at >350 nm of dichloromethane solutions containing N-ethoxy-2-methylpyridinium hexafluorophosphate (EMP⁺PF₆ ^-) and anthracene or thioxanthone. Initiation mechanisms involving the formation of ethoxyl radicals during the decomposition of EMP⁺ ions via electron transfer are proposed.     

Template‐Free Fabrication of Mesoporous Alumina Nanospheres Using Post‐Synthesis Water‐Ethanol Treatment of Monodispersed Aluminium Glycerate Nanospheres for Molybdenum Adsorption

This work reports the template‐free fabrication of mesoporous Al₂O₃ nanospheres with greatly enhanced textural characteristics through a newly developed post‐synthesis “water‐ethanol” treatment of aluminium glycerate nanospheres followed by high temperature calcination. The proposed “water‐ethanol” treatment is highly advantageous as the resulting mesoporous Al₂O₃ nanospheres exhibit 2–4 times higher surface area (up to 251 m² g^?1), narrower pore size distribution, and significantly lower crystallization temperature than those obtained without any post‐synthesis treatment. To demonstrate the generality of the proposed strategy, a nearly identical post‐synthesis “water treatment” method is successfully used to prepare mesoporous monometallic (e.g., manganese oxide (MnO₂)) and bimetallic oxide (e.g., CuCo₂O₄ and MnCo₂O₄) nanospheres assembled of nanosheets or nanoplates with highly enhanced textural characteristics from the corresponding monometallic and bimetallic glycerate nanospheres, respectively. When evaluated as molybdenum (Mo) adsorbents for potential use in molybdenum‐99/technetium‐99m (⁹⁹Mo/^99mTc) generators, the treated mesoporous Al₂O₃ nanospheres display higher molybdenum adsorption performance than non‐treated Al₂O₃ nanospheres and commercial Al₂O₃, thereby suggesting the effectiveness of the proposed strategy for improving the functional performance of oxide materials. It is expected that the proposed method can be utilized to prepare other mesoporous metal oxides with enhanced textural characteristics and functional performance.     

A data fusion framework with novel hybrid algorithm for multi-agent Decision Support System for Forest Fire

In this study Forest Fire Decision Support System (FOFDESS) which is a multi-agent Decision Support System for Forest Fire has been presented. Depending on the existing meteorological state and environmental observations, FOFDESS does the fire danger rating by predicting the forest fire and it can also approximate fire spread speed and quickly detect a started fire. Some data fusion algorithms such as Artificial Neural Network (ANN), Naive Bayes Classifier (NBC), Fuzzy Switching (FS) and image processing have been used for these operations in FOFDESS. These algorithms have been brought together by a designed data fusion framework and a novel hybrid algorithm called NABNEF (Naive Bayes Aided Neural-Fuzzy Algorithm) has been improved for fire danger rating in FOFDESS. In this state, FOFDESS is an integrated system which includes the dimensions of prediction, detection and management. As a result of the experiments, it was found out that FOFDESS helped determining the most accurate strategy for fire fighting by producing effective results.     

A new extended LMI-based robust gain scheduled state feedback <Emphasis Type="Italic">H</Emphasis><Subscript>2</Subscript> controller design

This paper proposes an improved robust H ₂ state feedback control synthesis for the Linear Parameter Varying (LPV) systems by attaining the affine quadratic stability. In place of standard H ₂ computation in the literature, a new H ₂ computation based on extended Linear Matrix Inequality (LMI) is improved by means of the slack variable, where it is obtained by separation Lyapunov matrix from system matrix. State feedback H ₂ synthesis is improved for the systems, and is more effective and less conservative than the common ones in the literature. Therefore, the less conservative results are obtained for gain scheduling controller design for LPV systems. The numerical examples are presented to show the superiority of the proposed controller design.     

Numerical solution of second‐order,two‐point boundary value problems using continuous genetic algorithms

Second‐order, two‐point boundary‐value problems are encountered in many engineering applications including the study of beam deflections, heat flow, and various dynamic systems. Two classical numerical techniques are widely used in the engineering community for the solution of such problems; the shooting method and finite difference method. These methods are suited for linear problems. However, when solving the non‐linear problems, these methods require some major modifications that include the use of some root‐finding technique. Furthermore, they require the use of other basic numerical techniques in order to obtain the solution. In this paper, the author introduces a novel method based on continuous genetic algorithms for numerically approximating a solution to this problem. The new method has the following characteristics; first, it does not require any modification while switching from the linear to the non‐linear case; as a result, it is of versatile nature. Second, this approach does not resort to more advanced mathematical tools and is thus easily accepted in the engineering application field. Third, the proposed methodology has an implicit parallel nature which points to its implementation on parallel machines. However, being a variant of the finite difference scheme with truncation error of the order O(h²), the method provides solutions with moderate accuracy. Numerical examples presented in the paper illustrate the applicability and generality of the proposed method. Copyright © 2004 John Wiley & Sons, Ltd.     

A comparative study of lean and agile manufacturing with a related survey of current practices in the UK

In response to changing success factors and environmental pressures, companies are aspiring to break out of mass production and become lean or agile. Whereas performance enhancements of lean practices have been demonstrated, it is now the case that markets have become increasingly characterized by turbulence, a situation in which reliance on lean practices is insufficient, and that survival requires adoption of agile practices. As a result, a comparative study of lean and agile manufacturing with a related survey of current practices in the UK was carried out, the results of which is presented in this paper. The paper explored the threats to lean and the drivers of agile manufacturing. Using data from a questionnaire survey, four hypotheses were tested, which was indicative of the benefits of agile manufacturing. In contrast to their lean counterparts, agile companies paid attention to a wider range of competitive capabilities. They therefore had a lower range of mean scores on competitive capabilities. Independent sample tests of significant difference in business performance measures revealed that the agile companies consistently outperformed their lean competitors on all business performance measures studied. In addition, a wider range of competitive capabilities and performance measures of the agile companies correlated significantly and positively whilst such correlation was observed for only a narrow range of capabilities and performance measures for lean companies. The results suggest that competing simultaneously on multiple competitive capabilities enhance performance better than a rather narrow focus on cost and quality.     

Factors influencing the crushing strength of some Aegean sands

Engineering properties of sands mainly depend on the integrity of the particles, which in turn has a strong bearing on their crushing strength. Seven different Aegean sands were tested for mineralogy, particle shape, size and specific gravity and the influence of aspect ratio, particle composition, particle shape and size on the crushing strength was examined. As the Aegean sands have a small range of sphericity and roundness, crushing strength tests were also performed on five Anatolian sands. A multiple regression analysis was carried out and an equation proposed to determine the crushing strength value of the Aegean sands. The computed values were found to be in good agreement with those obtained from the experimental investigations. It is concluded that the equation is sufficiently accurate to be a useful, time- and cost-effective way of obtaining crushing strength estimations at the preliminary stage of site investigations.